Move emac-drivers from features into connectivity directory

.astyleignore

@@ -2,6 +2,7 @@
 ^cmsis
 ^connectivity/libraries/mbed-coap
 ^connectivity/libraries/ppp
+^connectivity/drivers/emac
 ^features/cryptocell
 ^features/FEATURE_BLE
 ^features/FEATURE_EXPERIMENTAL_API/FEATURE_PSA/TARGET_MBED_PSA_SRV
@@ -12,7 +13,6 @@
 ^features/mbedtls
 ^features/nanostack/sal-stack-nanostack/source/Service_Libs/mdns/fnet
 ^features/nanostack/targets
-^features/netsocket/emac-drivers
 ^storage/filesystem/fat/ChaN
 ^storage/filesystem/littlefs/littlefs/
 ^storage/filesystem/littlefsv2/littlefs/

LICENSE.md

@@ -4,7 +4,8 @@ as can be found in: LICENSE-apache-2.0.txt
 Folders containing files under different permissive license than Apache 2.0 are listed below. Each folder should contain its own README file with license specified for its files. The original license text is included in those source files.
 
 - [cmsis](./cmsis) - MIT, BSD-3-Clause
-- [components/802.15.4_RF/mcr20a-rf-driver](./components/802.15.4_RF/mcr20a-rf-driver) - BSD-3-Clause
+- [connectivity/drivers/802.15.4_RF/mcr20a-rf-driver](./connectivity/drivers/802.15.4_RF/mcr20a-rf-driver) - BSD-3-Clause
+- [connectivity/drivers/emac](./connectivity/drivers/emac) - BSD-style
 - [features/cryptocell/FEATURE_CRYPTOCELL310](./features/cryptocell/FEATURE_CRYPTOCELL310) - ARM Object Code and Header Files License
 - [features/FEATURE_BOOTLOADER](./features/FEATURE_BOOTLOADER) - PBL
 - [features/FEATURE_BLE/targets](./features/FEATURE_BLE/targets) - BSD-style, PBL, MIT-style
@@ -14,7 +15,6 @@ Folders containing files under different permissive license than Apache 2.0 are
 - [features/lorawan](./features/lorawan) - Revised BSD
 - [features/lwipstack](./features/lwipstack) - BSD-style, MIT-style
 - [features/nanostack/sal-stack-nanostack](./features/nanostack/sal-stack-nanostack) - BSD-3-Clause
-- [features/netsocket/emac-drivers](./features/netsocket/emac-drivers) - BSD-style
 - [features/frameworks/unity/unity](./features/frameworks/unity/unity) - MIT
 - [features/unsupported](./features/unsupported) - MIT-style, BSD-style
 - [storage/blockdevice](./storage/blockdevice) - Apache 2.0, MIT

features/netsocket/emac-drivers/README.md → connectivity/drivers/emac/README.md

@@ -32,7 +32,7 @@ to control your device. This must be derived from class `EMAC`.
 This API is used by a network stack (or test framework) to control your driver.
 
 The EMAC-derived driver would normally be installed in
-features/netsocket/emac-drivers, often in a `TARGET_XXX` directory.
+connectivity/drivers/emac, often in a `TARGET_XXX` directory.
 
 Class EMAC is entirely abstract - you need to implement about a dozen calls
 to activate the driver, send and receive packets, and perform other control

doxyfile_options

@@ -841,21 +841,21 @@ EXCLUDE_PATTERNS       = */tools/* \
                          */BUILD/* \
                          */rtos/TARGET_CORTEX/rtx* \
                          */cmsis/* \
+                         */connectivity/drivers/emac/* \
                          */features/cryptocell/* \
                          */features/mbedtls/* \
                          */features/unsupported/* \
                          */features/lwipstack/* \
                          */features/nanostack/sal-stack-nanostack/* \
                          */features/nanostack/coap-service/* \
-                         */features/netsocket/emac-drivers/* \
                          */mbed-trace/* \
                          */mbed-coap/* \
                          */nanostack-libservice/* \
                          */mbed-client-randlib/* \
                          */nanostack/sal-stack-nanostack-eventloop/* \
                          */ble/generic/* \
                          */ble/pal/* \
-                         */components/802.15.4_RF/* \
+                         */connectivity/drivers/802.15.4_RF/* \
                          */components/wifi/* \
                          */UNITTESTS/* \
                          */connectivity/cellular/framework/AT/* \

doxygen_options.json

@@ -10,7 +10,7 @@
     "EXPAND_AS_DEFINED": "",
     "SKIP_FUNCTION_MACROS": "NO",
     "STRIP_CODE_COMMENTS": "NO",
-    "EXCLUDE_PATTERNS": "*/tools/* */targets/* */features/mbedtls/* */features/unsupported/* */BUILD/* */rtos/TARGET_CORTEX/rtx*/* */cmsis/* */features/lwipstack/* */nanostack/sal-stack-nanostack/* */nanostack/coap-service/* */ble/generic/* */ble/pal/* */mbed-trace/* */mbed-coap/* */nanostack-libservice/* */mbed-client-randlib/* */nanostack/sal-stack-nanostack-eventloop/* */components/802.15.4_RF/* */components/wifi/* */features/nfc/stack/* */UNITTESTS/* */features/cryptocell/*",
+    "EXCLUDE_PATTERNS": "*/tools/* */targets/* */features/mbedtls/* */features/unsupported/* */BUILD/* */rtos/TARGET_CORTEX/rtx*/* */cmsis/* */features/lwipstack/* */nanostack/sal-stack-nanostack/* */nanostack/coap-service/* */ble/generic/* */ble/pal/* */mbed-trace/* */mbed-coap/* */nanostack-libservice/* */mbed-client-randlib/* */nanostack/sal-stack-nanostack-eventloop/* */connectivity/drivers/802.15.4_RF/* */components/wifi/* */features/nfc/stack/* */UNITTESTS/* */features/cryptocell/*",
     "ALPHABETICAL_INDEX": "NO",
     "CASE_SENSE_NAMES": "NO",
     "DOT_MULTI_TARGETS": "YES",

targets/TARGET_STM/README.md

@@ -292,7 +292,7 @@ Depending on your PHY, you will have to customize several configuration values:
 - Duplex mask information in the PHY status register
 
 Check the default values in:
-https://github.com/ARMmbed/mbed-os/blob/master/features/netsocket/emac-drivers/TARGET_STM/mbed_lib.json
+https://github.com/ARMmbed/mbed-os/blob/master/connectivity/drivers/emac/TARGET_STM/mbed_lib.json
 
 Option is also to define your own `HAL_ETH_MspInit` function,
 you then have to add **USE_USER_DEFINED_HAL_ETH_MSPINIT** macro.

targets/TARGET_STM/TARGET_STM32F2/device/stm32f2xx_hal_conf.h

@@ -167,7 +167,7 @@
 #define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
 
 #ifdef MBED_CONF_STM32_EMAC_ETH_RXBUFNB
-/* default value in features/netsocket/emac-drivers/TARGET_STM/mbed_lib.json */
+/* default value in connectivity/drivers/emac/TARGET_STM/mbed_lib.json */
 #define ETH_RXBUFNB                    MBED_CONF_STM32_EMAC_ETH_RXBUFNB  /* Rx buffers of size ETH_RX_BUF_SIZE  */
 #define ETH_TXBUFNB                    MBED_CONF_STM32_EMAC_ETH_TXBUFNB  /* Tx buffers of size ETH_TX_BUF_SIZE  */
 #else

targets/TARGET_STM/TARGET_STM32F4/STM32Cube_FW/stm32f4xx_hal_conf.h

@@ -200,7 +200,7 @@
 #define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
 
 #ifdef MBED_CONF_STM32_EMAC_ETH_RXBUFNB
-/* default value in features/netsocket/emac-drivers/TARGET_STM/mbed_lib.json */
+/* default value in connectivity/drivers/emac/TARGET_STM/mbed_lib.json */
 #define ETH_RXBUFNB                    MBED_CONF_STM32_EMAC_ETH_RXBUFNB  /* Rx buffers of size ETH_RX_BUF_SIZE  */
 #define ETH_TXBUFNB                    MBED_CONF_STM32_EMAC_ETH_TXBUFNB  /* Tx buffers of size ETH_TX_BUF_SIZE  */
 #else

targets/TARGET_STM/TARGET_STM32F7/STM32Cube_FW/stm32f7xx_hal_conf.h

@@ -201,7 +201,7 @@
 #define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
 
 #ifdef MBED_CONF_STM32_EMAC_ETH_RXBUFNB
-/* default value in features/netsocket/emac-drivers/TARGET_STM/mbed_lib.json */
+/* default value in connectivity/drivers/emac/TARGET_STM/mbed_lib.json */
 #define ETH_RXBUFNB                    MBED_CONF_STM32_EMAC_ETH_RXBUFNB  /* Rx buffers of size ETH_RX_BUF_SIZE  */
 #define ETH_TXBUFNB                    MBED_CONF_STM32_EMAC_ETH_TXBUFNB  /* Tx buffers of size ETH_TX_BUF_SIZE  */
 #else

targets/TARGET_STM/TARGET_STM32H7/STM32Cube_FW/stm32h7xx_hal_conf.h

@@ -216,7 +216,7 @@
 
 /* ########################### Ethernet Configuration ######################### */
 #ifdef MBED_CONF_STM32_EMAC_ETH_RXBUFNB
-/* default value in features/netsocket/emac-drivers/TARGET_STM/mbed_lib.json */
+/* default value in connectivity/drivers/emac/TARGET_STM/mbed_lib.json */
 #define ETH_TX_DESC_CNT         MBED_CONF_STM32_EMAC_ETH_TXBUFNB  /* number of Ethernet Tx DMA descriptors */
 #define ETH_RX_DESC_CNT         MBED_CONF_STM32_EMAC_ETH_RXBUFNB  /* number of Ethernet Rx DMA descriptors */
 #else