Revert "Remove MTB_STM_S2LP target"

components/802.15.4_RF/stm-s2lp-rf-driver/mbed_lib.json

@@ -4,6 +4,11 @@
         "provide-default": {
             "help": "Provide default NanostackRfpy. [true/false]",
             "value": false
+        },
+    "target_overrides": {
+        "MTB_STM_S2LP": {
+           "s2lp.provide-default": true
+         }
         }
     }
 }

components/802.15.4_RF/stm-s2lp-rf-driver/stm-s2lp-rf-driver/NanostackRfPhys2lp.h

@@ -28,6 +28,42 @@
 // Uncomment to use testing gpios attached to TX/RX processes
 // #define TEST_GPIOS_ENABLED
 
+#if defined(TARGET_MTB_STM_S2LP)
+#if !defined(S2LP_SPI_SDI)
+#define S2LP_SPI_SDI        PA_7
+#endif
+#if !defined(S2LP_SPI_SDO)
+#define S2LP_SPI_SDO        PA_6
+#endif
+#if !defined(S2LP_SPI_SCLK)
+#define S2LP_SPI_SCLK       PA_5
+#endif
+#if !defined(S2LP_SPI_CS)
+#define S2LP_SPI_CS         PC_0
+#endif
+#if !defined(S2LP_SPI_SDN)
+#define S2LP_SPI_SDN        PF_13
+#endif
+#if !defined(S2LP_SPI_GPIO0)
+#define S2LP_SPI_GPIO0      PA_3
+#endif
+#if !defined(S2LP_SPI_GPIO1)
+#define S2LP_SPI_GPIO1      PC_3
+#endif
+#if !defined(S2LP_SPI_GPIO2)
+#define S2LP_SPI_GPIO2      PF_3
+#endif
+#if !defined(S2LP_SPI_GPIO3)
+#define S2LP_SPI_GPIO3      PF_10
+#endif
+#if !defined(S2LP_I2C_SDA)
+#define S2LP_I2C_SDA        PB_7
+#endif
+#if !defined(S2LP_I2C_SCL)
+#define S2LP_I2C_SCL        PB_6
+#endif
+#define AT24MAC
+#else
 #if !defined(S2LP_SPI_SDI)
 #define S2LP_SPI_SDI        D11
 #endif
@@ -70,6 +106,7 @@
 #if !defined(S2LP_SPI_GPIO3)
 #define S2LP_SPI_GPIO3      A5
 #endif
+#endif
 
 #include "at24mac_s2lp.h"
 

targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F429xI/TARGET_MTB_STM_S2LP/PeripheralNames.h

@@ -0,0 +1,102 @@
+/* mbed Microcontroller Library
+* SPDX-License-Identifier: BSD-3-Clause
+ *******************************************************************************
+ * Copyright (c) 2016, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    ADC_1 = (int)ADC1_BASE,
+    ADC_2 = (int)ADC2_BASE,
+    ADC_3 = (int)ADC3_BASE
+} ADCName;
+
+typedef enum {
+    DAC_1 = (int)DAC_BASE
+} DACName;
+
+typedef enum {
+    UART_1 = (int)USART1_BASE,
+    UART_2 = (int)USART2_BASE,
+    UART_3 = (int)USART3_BASE,
+    UART_4 = (int)UART4_BASE,
+    UART_5 = (int)UART5_BASE,
+    UART_6 = (int)USART6_BASE,
+    UART_7 = (int)UART7_BASE,
+    UART_8 = (int)UART8_BASE
+} UARTName;
+
+
+#define SPI_COUNT 6
+typedef enum {
+    SPI_1 = (int)SPI1_BASE,
+    SPI_2 = (int)SPI2_BASE,
+    SPI_3 = (int)SPI3_BASE,
+    SPI_4 = (int)SPI4_BASE,
+    SPI_5 = (int)SPI5_BASE,
+    SPI_6 = (int)SPI6_BASE
+} SPIName;
+
+typedef enum {
+    I2C_1 = (int)I2C1_BASE,
+    I2C_2 = (int)I2C2_BASE,
+    I2C_3 = (int)I2C3_BASE
+} I2CName;
+
+typedef enum {
+    PWM_1  = (int)TIM1_BASE,
+    PWM_2  = (int)TIM2_BASE,
+    PWM_3  = (int)TIM3_BASE,
+    PWM_4  = (int)TIM4_BASE,
+    PWM_5  = (int)TIM5_BASE,
+    PWM_8  = (int)TIM8_BASE,
+    PWM_9  = (int)TIM9_BASE,
+    PWM_10 = (int)TIM10_BASE,
+    PWM_11 = (int)TIM11_BASE,
+    PWM_12 = (int)TIM12_BASE,
+    PWM_13 = (int)TIM13_BASE,
+    PWM_14 = (int)TIM14_BASE
+} PWMName;
+
+typedef enum {
+    CAN_1 = (int)CAN1_BASE,
+    CAN_2 = (int)CAN2_BASE
+} CANName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif