Bootloader update bricked a new TinyFPGA BX #43
Description
Hope this is the right repo for this issue. This is a brand new board I got from Digikey. I was following the instructions in the TinyFPGA BX User Guide. I'm running Ubuntu 18.10. Prior to this log I installed apio via pip3 install apio, installed serial udev rule via apio drivers --serial-enable, and installed tinyprog via pip3 install tinyprog
atlas:~δ lsusb
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 003: ID 0bda:0811 Realtek Semiconductor Corp.
Bus 005 Device 002: ID 04d9:a0cd Holtek Semiconductor, Inc.
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 036: ID 1209:2100 InterBiometrics
Bus 001 Device 003: ID 062a:4102 Creative Labs
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
atlas:~δ tinyprog --update-bootloader
TinyProg CLI
------------
Using device id 1d50:6130
Only one board with active bootloader, using it.
The following update:
New Version: 1.0.1
Notes: Updates USB VID:PID to fix issues with APIO not recognizing the board.
is available for this board:
/dev/ttyACM0: TinyFPGA BX 1.0.0
UUID: dbce8bd3-7702-4fd3-815b-2aabe7e0c942
FPGA: ice40lp8k-cm81
Would you like to perform the update? [y/N] y
Fetching stage one...
Programming stage one...
Erasing: 100%|████████████████████████████████████████████████████████████████████████████████████████| 135k/135k [00:00<00:00, 157kB/s]
Writing: 100%|███████████████████████████████████████████████████████████████████████████████████████| 135k/135k [00:01<00:00, 86.9kB/s]
Reading: 100%|███████████████████████████████████████████████████████████████████████████████████████| 135k/135k [00:01<00:00, 86.5kB/s]
...Success!
Waiting for stage one to reconnect....connected!
Fetching stage two...
Programming stage two...
Erasing: 0%| | 0.00/299k [00:00<?, ?B/s]
Traceback (most recent call last):
File "/home/luke/.local/lib/python3.6/site-packages/tinyprog/__init__.py", line 19, in to_int
return ord(value)
TypeError: ord() expected a character, but string of length 0 found
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/home/luke/.local/bin/tinyprog", line 11, in <module>
sys.exit(main())
File "/home/luke/.local/lib/python3.6/site-packages/tinyprog/__main__.py", line 314, in main
perform_bootloader_update(port)
File "/home/luke/.local/lib/python3.6/site-packages/tinyprog/__main__.py", line 184, in perform_bootloader_update
if p.program_bitstream(0, bitstream):
File "/home/luke/.local/lib/python3.6/site-packages/tinyprog/__init__.py", line 419, in program_bitstream
return self.program(addr, bitstream)
File "/home/luke/.local/lib/python3.6/site-packages/tinyprog/__init__.py", line 375, in program
self.erase(addr, len(data), disable_progress=False)
File "/home/luke/.local/lib/python3.6/site-packages/tinyprog/__init__.py", line 347, in erase
self._erase(addr, erase_length)
File "/home/luke/.local/lib/python3.6/site-packages/tinyprog/__init__.py", line 301, in _erase
self.wait_while_busy()
File "/home/luke/.local/lib/python3.6/site-packages/tinyprog/__init__.py", line 290, in wait_while_busy
while to_int(self.read_sts()) & 1:
File "/home/luke/.local/lib/python3.6/site-packages/tinyprog/__init__.py", line 21, in to_int
return int(value)
ValueError: invalid literal for int() with base 10: b''
atlas:~δ tinyprog --update-bootloader
TinyProg CLI
------------
Using device id 1d50:6130
No port was specified and no active bootloaders found.
Activate bootloader by pressing the reset button.
atlas:~δ tinyprog --update-bootloader
TinyProg CLI
------------
Using device id 1d50:6130
No port was specified and no active bootloaders found.
Activate bootloader by pressing the reset button.
atlas:~δ lsusb
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 003: ID 0bda:0811 Realtek Semiconductor Corp.
Bus 005 Device 002: ID 04d9:a0cd Holtek Semiconductor, Inc.
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 062a:4102 Creative Labs
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
atlas:~δ echo Wat
Wat
atlas:~δ
As shown in the log, the board no longer enumerates on USB, even when unplugged/replugged (performed in between the two "no active bootloaders found" messages). The heartbeat LED on the board is now illuminated at a constant, dim level, which is consistent with an unconfigured iCE40 with pins in default weak-pullup state.
I noticed that out of habit I used pip3 rather than pip to install the packages. Could this be the cause of this?
I also would quite like to rescue this board, so are there any flat binary images floating around I can use to reimage the SPI flash, including the iCE40 warmboot applet etc? I don't mind a bit of soldering.
Thanks! I am happy to add any more details, although further testing on my end will be a challenge :)