SpiderMultusConfig: Fix error json tag for min/maxTxRateMbps

docs/usage/spider-multus-config-zh_CN.md

@@ -387,9 +387,9 @@ spec:
   config: '{"cniVersion":"0.3.1","name":"sriov-rdma","plugins":[{"vlan":100,"type":"sriov","ipam":{"type":"spiderpool"}},{"type":"rdma"},{"type":"coordinator"}]}'
 ```
 
-- 配置 Sriov 网络带宽
+- 限制 Sriov VF 传输带宽
 
-我们可通过 SpiderMultusConfig 配置 Sriov 的网络带宽:
+我们可通过 SpiderMultusConfig 限制 Sriov VF 传输带宽:
 
 ```bash
 cat <<EOF | kubectl apply -f -
@@ -405,11 +405,11 @@ spec:
     resourceName: spidernet.io/sriov_netdeivce
     vlanID: 100
     minTxRateMbps: 100
-    MaxTxRateMbps: 1000
+    maxTxRateMbps: 1000
 EOF
 ```
 
-> `minTxRateMbps` 和 `MaxTxRateMbps` 配置此 CNI 配置文件的网络传输带宽范围为: [100,1000]
+> `minTxRateMbps` 和 `maxTxRateMbps` 配置此 CNI 配置文件的网络传输带宽范围为: [100,1000]
 
 创建后，查看对应的 Multus NetworkAttachmentDefinition CR:
 
@@ -430,7 +430,7 @@ metadata:
     name: sriov-bandwidth
     uid: b08ce054-1ae8-414a-b37c-7fd6988b1b8e
 spec:
-  config: '{"cniVersion":"0.3.1","name":"sriov-bandwidth","plugins":[{"vlan":100,"type":"sriov","minTxRate": 100, "maxTxRate": 1000,"ipam":{"type":"spiderpool"}},{"type":"rdma"},{"type":"coordinator"}]}'
+  config: '{"cniVersion":"0.3.1","name":"sriov-bandwidth","plugins":[{"vlan":100,"type":"sriov","min_tx_rate": 100, "max_tx_rate": 1000,"ipam":{"type":"spiderpool"}},{"type":"rdma"},{"type":"coordinator"}]}'
 ```
 
 - 配置 Sriov VF 的 MTU 大小
@@ -475,7 +475,7 @@ metadata:
     name: sriov-bandwidth
     uid: b08ce054-1ae8-414a-b37c-7fd6988b1b8e
 spec:
-  config: '{"cniVersion":"0.3.1","name":"sriov-bandwidth","plugins":[{"vlan":100,"type":"sriov","minTxRate": 100, "maxTxRate": 1000,"ipam":{"type":"spiderpool"}},{"type":"rdma"},{"type":"coordinator"},{"type":"tuning","mtu":8000}]}'
+  config: '{"cniVersion":"0.3.1","name":"sriov-bandwidth","plugins":[{"vlan":100,"type":"sriov","min_tx_rate": 0, "max_tx_rate": 0,"ipam":{"type":"spiderpool"}},{"type":"rdma"},{"type":"coordinator"},{"type":"tuning","mtu":8000}]}'
 ```
 
 ### Ifacer 使用配置

docs/usage/spider-multus-config.md

@@ -411,7 +411,7 @@ spec:
 EOF
 ```
 
-> minTxRateMbps and MaxTxRateMbps configure the transmission bandwidth range for pods created with this configuration: [100,1000].
+> minTxRateMbps and maxTxRateMbps configure the transmission bandwidth range for pods created with this configuration: [100,1000].
 
 After creation, check the corresponding Multus NetworkAttachmentDefinition CR:
 
@@ -432,7 +432,7 @@ metadata:
     name: sriov-bandwidth
     uid: b08ce054-1ae8-414a-b37c-7fd6988b1b8e
 spec:
-  config: '{"cniVersion":"0.3.1","name":"sriov-bandwidth","plugins":[{"vlan":100,"type":"sriov","minTxRate": 100, "maxTxRate": 1000,"ipam":{"type":"spiderpool"}},{"type":"rdma"},{"type":"coordinator"}]}'
+  config: '{"cniVersion":"0.3.1","name":"sriov-bandwidth","plugins":[{"vlan":100,"type":"sriov","min_tx_rate": 100, "max_tx_rate": 1000,"ipam":{"type":"spiderpool"}},{"type":"rdma"},{"type":"coordinator"}]}'
 ```
 
 - Configure the mtu size of the Sriov VF

pkg/constant/k8s.go

@@ -170,6 +170,7 @@ const (
 	IPoIBCNI   = "ipoib"
 	OvsCNI     = "ovs"
 	CustomCNI  = "custom"
+	TuningCNI  = "tuning"
 )
 
 const WebhookMutateRoute = "/webhook-health-check"

pkg/multuscniconfig/utils.go

@@ -52,9 +52,9 @@ type IPvlanNetConf struct {
 type SRIOVNetConf struct {
 	Vlan *int32 `json:"vlan,omitempty"`
 	// Mbps, 0 = disable rate limiting
-	MinTxRate *int `json:"minTxRate,omitempty"`
+	MinTxRate *int `json:"min_tx_rate,omitempty"`
 	// Mbps, 0 = disable rate limiting
-	MaxTxRate *int                      `json:"maxTxRate,omitempty"`
+	MaxTxRate *int                      `json:"max_tx_rate,omitempty"`
 	Type      string                    `json:"type"`
 	DeviceID  string                    `json:"deviceID,omitempty"`
 	IPAM      *spiderpoolcmd.IPAMConfig `json:"ipam,omitempty"`

test/e2e/spidermultus/spidermultus_test.go

@@ -1195,7 +1195,7 @@ var _ = Describe("test spidermultus", Label("SpiderMultusConfig"), func() {
 		}, common.SpiderSyncMultusTime, common.ForcedWaitingTime).Should(BeTrue())
 	})
 
-	It("test the multusConfig with mtu size for sriov", Label("M00035"), func() {
+	It("test the multusConfig with for sriov", Label("M00035"), func() {
 		smcName := "mtu" + common.GenerateString(10, true)
 		smc := &v2beta1.SpiderMultusConfig{
 			ObjectMeta: metav1.ObjectMeta{
@@ -1208,6 +1208,8 @@ var _ = Describe("test spidermultus", Label("SpiderMultusConfig"), func() {
 					MTU:           ptr.To(int32(-1)),
 					ResourceName:  ptr.To("spidernet.io/test"),
 					RdmaIsolation: ptr.To(true),
+					MinTxRateMbps: ptr.To(int(10)),
+					MaxTxRateMbps: ptr.To(int(30)),
 				},
 			},
 		}
@@ -1225,7 +1227,27 @@ var _ = Describe("test spidermultus", Label("SpiderMultusConfig"), func() {
 			nad, err := frame.GetMultusInstance(smcName, namespace)
 			if err == nil {
 				GinkgoWriter.Printf("Multus Nad created: %+v \n", nad.Spec.Config)
-				return true
+				config, err := libcni.ConfListFromBytes([]byte(nad.Spec.Config))
+				Expect(err).NotTo(HaveOccurred())
+
+				sriov, tuning := false, false
+				for _, p := range config.Plugins {
+					c := make(map[string]interface{})
+					err = json.Unmarshal(p.Bytes, &c)
+					Expect(err).NotTo(HaveOccurred())
+
+					if c["type"] == constant.SriovCNI {
+						Expect(c["min_tx_rate"]).To(Equal(float64(10)))
+						Expect(c["max_tx_rate"]).To(Equal(float64(30)))
+						sriov = true
+					}
+
+					if c["type"] == constant.TuningCNI {
+						Expect(c["mtu"]).To(Equal(float64(1400)))
+						tuning = true
+					}
+				}
+				return sriov && tuning
 			}
 
 			Expect(err.Error()).To(ContainSubstring("not found"))