X96 Max Plus Q1（s905x3）4G+32G supports writing to emmc

[tv4you2016]

Hello @ophub

my box is an X96 Max PlusQ1

Used DTB file: meson-sm1-x96-air.dtb

Software informations:

Armbian image: Armbian_23.02.0_amlogic_s905x3_bullseye_5.15.81_server_2022.12.08.img
Used DTB file: meson-sm1-x96-air.dtb

Problem:

At first, I used the meson-sm1-x96-air.dtb file for the OS Installation as the Instructions mentioned, but the system shows only 2GB instead of 4GB

I leave here some files extracted from the original android firmware that I think can help

mybox.zip

Firmware Original:
https://cloud.mail.ru/public/2MG6/C7Pvdaw49

[ophub]

cd /boot
cp -f u-boot-x96maxplus.bin u-boot.emmc
cp -f u-boot-x96maxplus.bin u-boot.ext

[tv4you2016]

@ophub
hello, I did the commands mentioned and after booting, there is a black screen and it does not start

[tv4you2016]

Log Uart: 

> SM1:BL:511f6b:81ca2f;FEAT:A0F83180:20282000;POC:F;RCY:0;EMMC:0;READ:0;0.0;CHK:0;
> bl2_stage_init 0x01
> bl2_stage_init 0x81
> hw id: 0x0000 - pwm id 0x01
> bl2_stage_init 0xc1
> bl2_stage_init 0x02
> 
> L0:00000000
> L1:00000703
> L2:00008067
> L3:15000020
> S1:00000000
> B2:20282000
> B1:a0f83180
> 
> TE: 142148
> 
> BL2 Built : 15:21:42, Mar 26 2020. g12a g486bc38 - gongwei.chen@droid11-sz
> 
> Board ID = 1
> Set cpu clk to 24M
> Set clk81 to 24M
> Use GP1_pll as DSU clk.
> DSU clk: 1200 Mhz
> CPU clk: 1200 MHz
> Set clk81 to 166.6M
> eMMC boot @ 0
> sw8 s
> board id: 1
> Load FIP HDR DDR from eMMC, src: 0x00010200, des: 0xfffd0000, size: 0x00004000, part: 0
> fw parse done
> PIEI prepare done
> 00000000
> emmc switch 1 ok
> ddr saved addr:00016000
> Load ddr parameter from eMMC, src: 0x02c00000, des: 0xfffd0000, size: 0x00001000, part: 0
> 00000000
> emmc switch 0 ok
> fastboot data verify
> result: 255
> Cfg max: 12, cur: 1. Board id: 255. Force loop cfg
> DDR4 probe
> 
> LPDDR4_PHY_V_0_1_21-Built : 15:37:51, Mar 26 2020. g12a gf098346 - gongwei.chen@droid11-sz
> ddr clk to 1320MHz
> 
> dmc_version 0001
> Check phy result
> INFO : End of initialization
> INFO : End of read enable training
> INFO : End of fine write leveling
> INFO : ERROR : Training has failed!
> 1D training failed
> Cfg max: 12, cur: 2. Board id: 255. Force loop cfg
> DDR4 probe
> ddr clk to 912MHz
> 
> dmc_version 0001
> Check phy result
> INFO : End of initialization
> INFO : End of read enable training
> INFO : End of fine write leveling
> INFO : ERROR : Training has failed!
> 1D training failed
> Cfg max: 12, cur: 3. Board id: 255. Force loop cfg
> DDR3 probe
> ddr clk to 792MHz
> 
> dmc_version 0001
> Check phy result
> INFO : End of initialization
> INFO : End of read enable training
> INFO : End of fine write leveling
> INFO : End of read dq deskew training
> INFO : End of MPR read delay center optimization
> INFO : End of Write leveling coarse delay
> INFO : End of write delay center optimization
> INFO : End of read delay center optimization
> INFO : End of max read latency training
> INFO : Training has run successfully!
>  dwc_ddrphy_apb_wr((0<<20)|(2<<16)|(0<<12)|(0xb0):00e4
> 1D training succeed
> auto size-- 65535DDR cs0 size: 4096MB
> DDR cs1 size: 0MB
> DMC_DDR_CTRL: 0000002dDDR size: 3928MB
> cs0 DataBus test pass
> cs0 AddrBus test pass
> 
> non-sec scramble use zero key
> ddr scramble enabled
> 
> 100bdlr_step_size ps== 412
> result report
> boot times 0Enable ddr reg access
> 00000000
> emmc switch 3 ok
> BL2: rpmb counter: 0x00019f0d
> 00000000
> emmc switch 0 ok
> Load FIP HDR from eMMC, src: 0x00010200, des: 0x01700000, size: 0x00004000, part: 0
> Load BL3X from eMMC, src: 0x00078200, des: 0x01768000, size: 0x000ed200, part: 0
> 0.0;M3 CHK:0;cm4_sp_mode 0
> [Image: g12a_v1.1.3394-7d43064d5 2020-05-07 15:37:06 gongwei.chen@droid11-sz]
> OPS=0x01
> ring efuse init
> 2b 0b 01 00 01 13 27 00 00 10 30 38 30 52 30 50
> [0.014467 Inits done]
> secure task start!
> high task start!
> low task start!
> boot bl31
> NOTICE:  BL31: v1.3(release):5d6723eeb
> NOTICE:  BL31: Built : 15:05:59, Mar 17 2020
> NOTICE:  BL31: G12A normal boot!
> NOTICE:  BL31: BL33 decompress pass
> ERROR:   Error initializing runtime service opteed_fast
> 
> 
> U-Boot 2015.01 (Dec 09 2020 - 16:24:50)
> 
> DRAM:  3.8 GiB
> Relocation Offset is: d6d86000
> mmu cfg end: 0xe0000000
> mmu cfg end: 0xe0000000
> spi_post_bind(spifc): req_seq = 0
> register usb cfg[0][1] = 00000000d7e9a068
> NAND:  get_sys_clk_rate_mtd() 292, clock setting 200!
> bus cycle0: 6,timing: 7
> NAND device id: 0 ff ff ff ff ff
> No NAND device found!!!
> nand init failed: -6
> get_sys_clk_rate_mtd() 292, clock setting 200!
> bus cycle0: 6,timing: 7
> NAND device id: 0 ff ff ff ff ff
> No NAND device found!!!
> nand init failed: -6
> MMC:   aml_priv->desc_buf = 0x00000000d3d76a70
> aml_priv->desc_buf = 0x00000000d3d78db0
> SDIO Port B: 0, SDIO Port C: 1
> co-phase 0x3, tx-dly 0, clock 400000
> co-phase 0x3, tx-dly 0, clock 400000
> co-phase 0x3, tx-dly 0, clock 400000
> emmc/sd response timeout, cmd8, cmd->cmdarg=0x1aa, status=0x1ff2800
> emmc/sd response timeout, cmd55, cmd->cmdarg=0x0, status=0x1ff2800
> co-phase 0x3, tx-dly 0, clock 400000
> co-phase 0x3, tx-dly 0, clock 40000000
> [set_emmc_calc_fixed_adj][875]find fixed adj_delay=20
> init_part() 282: PART_TYPE_DOS
> [mmc_init] mmc init success
>       Amlogic multi-dtb tool
>       Multi dtb detected
>       Multi dtb tool version: v2 .
>       Support 3 dtbs.
>         aml_dt soc: sm1 platform: ac213 variant: 4g
>         dtb 0 soc: g12a   plat: u212   vari: 4g
>         dtb 1 soc: sm1   plat: ac213   vari: 2g
>         dtb 2 soc: sm1   plat: ac213   vari: 4g
>       Find match dtb: 2
> start dts,buffer=00000000d3d7b620,dt_addr=00000000d3da4e20
> get_partition_from_dts() 92: ret 0
>       Amlogic multi-dtb tool
>       Multi dtb detected
>       Multi dtb tool version: v2 .
>       Support 3 dtbs.
>         aml_dt soc: sm1 platform: ac213 variant: 4g
>         dtb 0 soc: g12a   plat: u212   vari: 4g
>         dtb 1 soc: sm1   plat: ac213   vari: 2g
>         dtb 2 soc: sm1   plat: ac213   vari: 4g
>       Find match dtb: 2
> parts: 1
> 00:      data   ffffffffffffffff 4
> init_part() 282: PART_TYPE_DOS
> eMMC/TSD partition table have been checked OK!
> crc32_s:0x1577dad == storage crc_pattern:0x1577dad!!!
> crc32_s:0xee152b83 == storage crc_pattern:0xee152b83!!!
> crc32_s:0x79f50f07 == storage crc_pattern:0x79f50f07!!!
> mmc env offset: 0x7400000
> In:    serial
> Out:   serial
> Err:   serial
> reboot_mode=cold_boot
> [store]To run cmd[emmc dtb_read 0x1000000 0x40000]
> _verify_dtb_checksum()-3476: calc b646bac5, store b646bac5
> _verify_dtb_checksum()-3476: calc b646bac5, store b646bac5
> dtb_read()-3691: total valid 2
> update_old_dtb()-3672: do nothing
>       Amlogic multi-dtb tool
>       Multi dtb detected
>       Multi dtb tool version: v2 .
>       Support 3 dtbs.
>         aml_dt soc: sm1 platform: ac213 variant: 4g
>         dtb 0 soc: g12a   plat: u212   vari: 4g
>         dtb 1 soc: sm1   plat: ac213   vari: 2g
>         dtb 2 soc: sm1   plat: ac213   vari: 4g
>       Find match dtb: 2
> amlkey_init() enter!
> [EFUSE_MSG]keynum is 4
> vpu: driver version: v20190313
> vpu: detect chip type: 11
> vpu: clk_level default: 7(666667000Hz), max: 7(666667000Hz)
> vpu: clk_level in dts: 7
> vpu: vpu_power_on
> vpu: set_vpu_clk
> vpu: set clk: 666667000Hz, readback: 666666667Hz(0x100)
> vpu: set_vpu_clk finish
> vpu: vpu_module_init_config
> vpp: vpp_init
> vpp: vpp osd2 matrix rgb2yuv..............
> hdr_func 4, hdr_process_select 0x1
> cvbs: cpuid:0x2b
> cvbs: find performance_pal config
> Net:   dwmac.ff3f0000amlkey_init() enter!
> amlkey_init() 71: already init!
> [EFUSE_MSG]keynum is 4
> MACADDR:02:00:00:27:13:01(from chipid)
> 
> CONFIG_AVB2: null
> Start read misc partition datas!
> Cannot find dev.
> amlmmc cmd <NULL> failed
> 
> store - STORE sub-system
> 
> Usage:
> store init flag
> store read name addr off|partition size
>     read 'size' bytes starting at offset 'off'
>     to/from memory address 'addr', skipping bad blocks.
> store write name addr off|partition size
>     write 'size' bytes starting at offset 'off'
>     to/from memory address 'addr', skipping bad blocks.
> store rom_write add off size.
>         write uboot to the boot device
> store erase boot/data:
>         erase the area which is uboot or data
> store erase partition <partition_name>:
>         erase the area which partition in u-boot 
> store erase dtb
> store erase key
> store disprotect key
> store rom_protect on/off
> store scrub off|partition size
>         scrub the area from offset and size
> store dtb iread/read/write addr <size>
>         read/write dtb, size is optional
> store key read/write addr <size>
>         read/write key, size is optional
> store ddr_parameter read/write addr <size>
>         read/write ddr parameter, size is optional 
> store mbr addr
>    update mbr/partition table by dtb
> store bootlog
>    show boot logs
> 
> [burnup]Err:store_read_ops,L101:cmd failed, ret=1, [store  read misc 0xd3d75090  0x0  0x820]
> failed to store read misc.
> info->magic =
> info->version_major = 0
> info->version_minor = 0
> info->slots[0].priority = 0
> info->slots[0].tries_remaining = 0
> info->slots[0].successful_boot = 0
> info->slots[1].priority = 0
> info->slots[1].tries_remaining = 0
> info->slots[1].successful_boot = 0
> info->crc32 = 0
> Magic  is incorrect.
> boot-info is invalid. Resetting.
> save boot-info
> info->magic =
> info->version_major = 1
> info->version_minor = 0
> info->slots[0].priority = 15
> info->slots[0].tries_remaining = 7
> info->slots[0].successful_boot = 0
> info->slots[1].priority = 14
> info->slots[1].tries_remaining = 7
> info->slots[1].successful_boot = 0
> info->crc32 = -1075449479
> Cannot find dev.
> amlmmc cmd <NULL> failed
> 
> store - STORE sub-system
> 
> Usage:
> store init flag
> store read name addr off|partition size
>     read 'size' bytes starting at offset 'off'
>     to/from memory address 'addr', skipping bad blocks.
> store write name addr off|partition size
>     write 'size' bytes starting at offset 'off'
>     to/from memory address 'addr', skipping bad blocks.
> store rom_write add off size.
>         write uboot to the boot device
> store erase boot/data:
>         erase the area which is uboot or data
> store erase partition <partition_name>: 
>         erase the area which partition in u-boot
> store erase dtb
> store erase key
> store disprotect key
> store rom_protect on/off
> store scrub off|partition size
>         scrub the area from offset and size
> store dtb iread/read/write addr <size>
>         read/write dtb, size is optional
> store key read/write addr <size>
>         read/write key, size is optional 
> store ddr_parameter read/write addr <size>
>         read/write ddr parameter, size is optional
> store mbr addr
>    update mbr/partition table by dtb
> store bootlog
>    show boot logs
> 
> [burnup]Err:store_write_ops,L165:cmd [store  write misc 0xd3d75090  0x0  0x820] failed active slot = 0
> wipe_data=successful
> wipe_cache=successful
> upgrade_step=2
> reboot_mode:::: cold_boot
> s_version: U-Boot 2015.01
> amlkey_init() enter!
> amlkey_init() 71: already init!
> [EFUSE_MSG]keynum is 4
> [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet
> [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet
> [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet
> [KM]Error:f[keymanage_dts_get_key_device]L105:oemkey key name is not exist
> [KM]Error:f[_get_km_ops_by_name]L240:key oemkey not know device 4
> [KM]Error:f[key_manage_query_exist]L554:There isn't dts cfg for key[oemkey]
> [KM]Error:f[key_manage_query_size]L511:Fail in query key exist
> hpd_state=0
> do_hpd_detect: hdmimode=2160p30hz
> do_hpd_detect: colorattribute=444,8bit
> Saving Environment to aml-storage...
> mmc env offset: 0x7400000
> Writing to MMC(1)... done
> no sink, fallback to 720p60hz[4]
> hdr mode is 0
> dv  mode is ver:0  len: 0
> hdr10+ mode is 0
> read hdmichecksum 0x00000000, colorattribute 444,8bit
> read hdmimode 2160p30hz, colorspace <NULL>, colordepth <NULL>
> do_get_parse_edid: autoMode = false, manualMode=95
> isYuv4kSink: false, maxTMDSRate=150
> do_get_parse_edid: non-yuv4k sink: inColorSpace: HDMI_COLOR_FORMAT_RGB
> do_get_parse_edid: default inColorDepth: HDMI_COLOR_DEPTH_24B
> TV is same, initial mode is: 576cvbs attr: 444,8bit
> dolby_status 0
> dolby_status 0
> dolby_vision_process: no tv and dv disabled
> Saving Environment to aml-storage...
> mmc env offset: 0x7400000
> Writing to MMC(1)... done
> [OSD]load fb addr from dts:/meson-fb
> [OSD]load fb addr from dts:/fb
> [OSD]set initrd_high: 0xdf800000
> [OSD]fb_addr for logo: 0xdf800000
> [OSD]load fb addr from dts:/meson-fb
> [OSD]load fb addr from dts:/fb
> [OSD]fb_addr for logo: 0xdf800000
> [OSD]VPP_OFIFO_SIZE:0xfff01fff
> [CANVAS]canvas init
> [CANVAS]addr=0xdf800000 width=3840, height=2160
> Cannot find dev.
> amlmmc cmd <NULL> failed 
> 
> store - STORE sub-system
> 
> Usage:
> store init flag
> store read name addr off|partition size
>     read 'size' bytes starting at offset 'off'
>     to/from memory address 'addr', skipping bad blocks.
> store write name addr off|partition size
>     write 'size' bytes starting at offset 'off'
>     to/from memory address 'addr', skipping bad blocks.
> store rom_write add off size.
>         write uboot to the boot device
> store erase boot/data:
>         erase the area which is uboot or data
> store erase partition <partition_name>:
>         erase the area which partition in u-boot 
> store erase dtb
> store erase key
> store disprotect key
> store rom_protect on/off
> store scrub off|partition size
>         scrub the area from offset and size
> store dtb iread/read/write addr <size>
>         read/write dtb, size is optional
> store key read/write addr <size>
>         read/write key, size is optional
> store ddr_parameter read/write addr <size>
>         read/write ddr parameter, size is optional
> store mbr addr
>    update mbr/partition table by dtb
> store bootlog
>    show boot logs
> 
> [burnup]Err:store_read_ops,L101:cmd failed, ret=1, [store  read logo 0x1080000  0x0  0x2000]
> Err imgread(L563):Fail to read 0x2000B from part[logo] at offset 0
> There is no valid bmp file at the given address
> [OSD]osd_hw.free_dst_data: 0,719,0,575
> [OSD]osd1_update_disp_freescale_enable
> vpp: vpp_matrix_update: 2
> cvbs_performance_enhancement
> cvbs_config_hdmipll_g12a
> cvbs_set_vid2_clk
> dolby_status 0
> dolby_status 0
> hdr_packet
> vpp: hdr_policy = 0
> vpp: Rx hdr_info.hdr_sup_eotf_smpte_st_2084 = 0
> s_version: U-Boot 2015.01
> amlkey_init() enter!
> amlkey_init() 71: already init!
> [EFUSE_MSG]keynum is 4
> [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet
> [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet
> [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet
> [KM]Error:f[keymanage_dts_get_key_device]L105:oemkey key name is not exist
> [KM]Error:f[_get_km_ops_by_name]L240:key oemkey not know device 4
> [KM]Error:f[key_manage_query_exist]L554:There isn't dts cfg for key[oemkey]
> [KM]Error:f[key_manage_query_size]L511:Fail in query key exist
> gpio: pin GPIOAO_3 (gpio 3) value is 1
> SARADC channel(2) is 0x3fd.
> saradc - saradc sub-system
> 
> Usage:
> saradc saradc open <channel>    - open a SARADC channel
> saradc close    - close the SARADC
> saradc getval   - get the value in current channel
> saradc test     - test the SARADC by channel-7
> saradc get_in_range <min> <max> - return 0 if current value in the range of current channel
> 
> Command: bcb uboot-command 
> Start read misc partition datas!
> Cannot find dev.
> amlmmc cmd <NULL> failed
> 
> store - STORE sub-system
> 
> Usage:
> store init flag
> store read name addr off|partition size
>     read 'size' bytes starting at offset 'off'
>     to/from memory address 'addr', skipping bad blocks.
> store write name addr off|partition size
>     write 'size' bytes starting at offset 'off'
>     to/from memory address 'addr', skipping bad blocks.
> store rom_write add off size.
>         write uboot to the boot device
> store erase boot/data:
>         erase the area which is uboot or data
> store erase partition <partition_name>:
>         erase the area which partition in u-boot
> store erase dtb
> store erase key
> store disprotect key
> store rom_protect on/off
> store scrub off|partition size
>         scrub the area from offset and size
> store dtb iread/read/write addr <size>
>         read/write dtb, size is optional
> store key read/write addr <size>
>         read/write key, size is optional
> store ddr_parameter read/write addr <size>
>         read/write ddr parameter, size is optional
> store mbr addr
>    update mbr/partition table by dtb
> store bootlog
>    show boot logs
> 
> [burnup]Err:store_read_ops,L101:cmd failed, ret=1, [store  read misc 0xd3d75080  0x0  0x440]
> failed to store read misc.
> bcb - bcb
> 
> Usage:
> bcb
> This command will run some commands which saved in misc
> partition by mark to decide whether execute command!
> Command format:
>   bcb bcb_mark
> Example:
>   /dev/block/misc partiton is saved some contents:
>   uboot-command
>   N/A
>   setenv aa 11;setenv bb 22;setenv cc 33;saveenv;
> So you can execute command: bcb uboot-command
> InUsbBurn
> wait for phy ready count is 0
> noSof
> sof timeout, reset usb phy tuning
> s_version: U-Boot 2015.01
> amlkey_init() enter!
> amlkey_init() 71: already init!
> [EFUSE_MSG]keynum is 4
> [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet
> [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet
> [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet
> [KM]Error:f[keymanage_dts_get_key_device]L105:oemkey key name is not exist
> [KM]Error:f[_get_km_ops_by_name]L240:key oemkey not know device 4
> [KM]Error:f[key_manage_query_exist]L554:There isn't dts cfg for key[oemkey]
> [KM]Error:f[key_manage_query_size]L511:Fail in query key exist
> Hit Enter or space or Ctrl+C key to stop autoboot -- :  0 
> card out
> (Re)start USB...
> USB0:   USB3.0 XHCI init start
> Register 3000140 NbrPorts 2
> Starting the controller
> USB XHCI 1.10
> scanning bus 0 for devices... 1 USB Device(s) found
>        scanning usb for storage devices... 0 Storage Device(s) found
> ** Bad device usb 0 **
> ** Bad device usb 1 **
> ** Bad device usb 2 **
> ** Bad device usb 3 **
> reading emmc_autoscript
> 831 bytes read in 3 ms (270.5 KiB/s)
> ## Executing script at 01020000
> reading u-boot.emmc
> 746678 bytes read in 24 ms (29.7 MiB/s)
> ## Starting application at 0x01000000 ...
> 
> 
> U-Boot 2021.07-rc3-00183-gd6e1cdad51-dirty (May 31 2021 - 22:33:28 +0800) x96-max-plus
> 
> Model: AMedia X96 Max+
> SoC:   Amlogic Meson SM1 (Unknown) Revision 2b:b (1:2)
> DRAM:  3.8 GiB
> MMC:   sd@ffe03000: 0, sd@ffe05000: 1, mmc@ffe07000: 2
> Loading Environment from nowhere... OK
> In:    serial
> Out:   serial
> Err:   serial
> Net:   eth0: ethernet@ff3f0000
> Hit any key to stop autoboot:  0 
> starting USB...
> Bus usb@ff500000: Register 3000140 NbrPorts 3
> Starting the controller
> USB XHCI 1.10
> scanning bus usb@ff500000 for devices... 1 USB Device(s) found
>        scanning usb for storage devices... 0 Storage Device(s) found
> 
> Device 0: unknown device
> Card did not respond to voltage select! : -110
> Card did not respond to voltage select! : -110
> unable to select a mode : -110
> DMA reset timeout
> missing environment variable: pxeuuid
> missing environment variable: bootfile
> Retrieving file: pxelinux.cfg/01-86-0b-2a-63-8f-b8
> DMA reset timeout
> missing environment variable: bootfile
> Retrieving file: pxelinux.cfg/00000000
> DMA reset timeout
> missing environment variable: bootfile
> Retrieving file: pxelinux.cfg/0000000
> DMA reset timeout
> missing environment variable: bootfile
> Retrieving file: pxelinux.cfg/000000
> DMA reset timeout
> missing environment variable: bootfile
> Retrieving file: pxelinux.cfg/00000
> DMA reset timeout
> missing environment variable: bootfile
> Retrieving file: pxelinux.cfg/0000
> DMA reset timeout
> missing environment variable: bootfile
> Retrieving file: pxelinux.cfg/000
> DMA reset timeout
> missing environment variable: bootfile
> Retrieving file: pxelinux.cfg/00      
> DMA reset timeout
> missing environment variable: bootfile
> Retrieving file: pxelinux.cfg/0       
> DMA reset timeout
> missing environment variable: bootfile
> Retrieving file: pxelinux.cfg/default-arm-meson-ac2xx
> DMA reset timeout
> missing environment variable: bootfile
> Retrieving file: pxelinux.cfg/default-arm-meson
> DMA reset timeout
> missing environment variable: bootfile   
> Retrieving file: pxelinux.cfg/default-arm
> DMA reset timeout
> missing environment variable: bootfile
> Retrieving file: pxelinux.cfg/default
> DMA reset timeout
> Config file not found
> DMA reset timeout
> DMA reset timeout

[ophub]

What is soc and 100M wired network card?

[tv4you2016]

yes

[tv4you2016]

X96 Max Plus Q1 . Without chip 1000Mb. LAN 100, Cdtech 4761743

[ophub]

Wait a minute. I'll compile one for you

[tv4you2016]

Ok I wait... I'm here for any kind of tests you want to do

[ophub]

meson-sm1-x96-max-plus-q1.dtb.zip

Use the firmware of 5.15 kernel, uzip the dtb file, upload it to the /boot/dtb/amlogic directory, modify the /boot/uEnv.txt file, and change the file name to this. Restart the test.
No need to add u-boot

[tv4you2016]

Not working 
black screen and does not start



Uart Log 


`SM1:BL:511f6b:81ca2f;FEAT:A0F83180:20282000;POC:F;RCY:0;EMMC:0;READ:0;0.0;CHK:0;
bl2_stage_init 0x01
bl2_stage_init 0x81
hw id: 0x0000 - pwm id 0x01
bl2_stage_init 0xc1
bl2_stage_init 0x02

L0:00000000
L1:00000703
L2:00008067
L3:15000020
S1:00000000
B2:20282000
B1:a0f83180

TE: 146078

BL2 Built : 15:21:42, Mar 26 2020. g12a g486bc38 - gongwei.chen@droid11-sz

Board ID = 1
Set cpu clk to 24M
Set clk81 to 24M
Use GP1_pll as DSU clk.
DSU clk: 1200 Mhz
CPU clk: 1200 MHz
Set clk81 to 166.6M
eMMC boot @ 0
sw8 s
board id: 1
Load FIP HDR DDR from eMMC, src: 0x00010200, des: 0xfffd0000, size: 0x00004000,                                                                                                                                                              part: 0
fw parse done
PIEI prepare done
00000000
emmc switch 1 ok
ddr saved addr:00016000
Load ddr parameter from eMMC, src: 0x02c00000, des: 0xfffd0000, size: 0x00001000                                                                                                                                                             , part: 0
00000000
emmc switch 0 ok
fastboot data verify
result: 255
Cfg max: 12, cur: 1. Board id: 255. Force loop cfg
DDR4 probe

LPDDR4_PHY_V_0_1_21-Built : 15:37:51, Mar 26 2020. g12a gf098346 - gongwei.chen@                                                                                                                                                             droid11-sz
ddr clk to 1320MHz

dmc_version 0001
Check phy result
INFO : End of initialization
INFO : End of read enable training
INFO : End of fine write leveling
INFO : ERROR : Training has failed!
1D training failed
Cfg max: 12, cur: 2. Board id: 255. Force loop cfg
DDR4 probe
ddr clk to 912MHz

dmc_version 0001
Check phy result
INFO : End of initialization
INFO : End of read enable training
INFO : End of fine write leveling
INFO : ERROR : Training has failed!
1D training failed
Cfg max: 12, cur: 3. Board id: 255. Force loop cfg
DDR3 probe
ddr clk to 792MHz

dmc_version 0001
Check phy result
INFO : End of initialization
INFO : End of read enable training
INFO : End of fine write leveling
INFO : End of read dq deskew training
INFO : End of MPR read delay center optimization
INFO : End of Write leveling coarse delay
INFO : End of write delay center optimization
INFO : End of read delay center optimization
INFO : End of max read latency training
INFO : Training has run successfully!
 dwc_ddrphy_apb_wr((0<<20)|(2<<16)|(0<<12)|(0xb0):00e4
1D training succeed
auto size-- 65535DDR cs0 size: 4096MB
DDR cs1 size: 0MB
DMC_DDR_CTRL: 0000002dDDR size: 3928MB
cs0 DataBus test pass
cs0 AddrBus test pass

non-sec scramble use zero key
ddr scramble enabled

100bdlr_step_size ps== 402
result report
boot times 0Enable ddr reg access
00000000
emmc switch 3 ok
BL2: rpmb counter: 0x00019f0d
00000000
emmc switch 0 ok
Load FIP HDR from eMMC, src: 0x00010200, des: 0x01700000, size: 0x00004000, part                                                                                                                                                             : 0
Load BL3X from eMMC, src: 0x00078200, des: 0x01768000, size: 0x000ed200, part: 0
0.0;M3 CHK:0;cm4_sp_mode 0
[Image: g12a_v1.1.3394-7d43064d5 2020-05-07 15:37:06 gongwei.chen@droid11-sz]
OPS=0x01
ring efuse init
2b 0b 01 00 01 13 27 00 00 10 30 38 30 52 30 50
[0.014422 Inits done]
secure task start!
high task start!
low task start!
boot bl31
NOTICE:  BL31: v1.3(release):5d6723eeb
NOTICE:  BL31: Built : 15:05:59, Mar 17 2020
NOTICE:  BL31: G12A normal boot!
NOTICE:  BL31: BL33 decompress pass
ERROR:   Error initializing runtime service opteed_fast


U-Boot 2015.01 (Dec 09 2020 - 16:24:50)

DRAM:  3.8 GiB
Relocation Offset is: d6d86000
mmu cfg end: 0xe0000000
mmu cfg end: 0xe0000000
spi_post_bind(spifc): req_seq = 0
register usb cfg[0][1] = 00000000d7e9a068
NAND:  get_sys_clk_rate_mtd() 292, clock setting 200!
bus cycle0: 6,timing: 7
NAND device id: 0 ff ff ff ff ff
No NAND device found!!!
nand init failed: -6
get_sys_clk_rate_mtd() 292, clock setting 200!
bus cycle0: 6,timing: 7
NAND device id: 0 ff ff ff ff ff
No NAND device found!!!
nand init failed: -6
MMC:   aml_priv->desc_buf = 0x00000000d3d76a70
aml_priv->desc_buf = 0x00000000d3d78db0
SDIO Port B: 0, SDIO Port C: 1
co-phase 0x3, tx-dly 0, clock 400000
co-phase 0x3, tx-dly 0, clock 400000
co-phase 0x3, tx-dly 0, clock 400000
emmc/sd response timeout, cmd8, cmd->cmdarg=0x1aa, status=0x1ff2800
emmc/sd response timeout, cmd55, cmd->cmdarg=0x0, status=0x1ff2800
co-phase 0x3, tx-dly 0, clock 400000
co-phase 0x3, tx-dly 0, clock 40000000
[set_emmc_calc_fixed_adj][875]find fixed adj_delay=20
init_part() 282: PART_TYPE_DOS
[mmc_init] mmc init success
      Amlogic multi-dtb tool
      Multi dtb detected
      Multi dtb tool version: v2 .
      Support 3 dtbs.
        aml_dt soc: sm1 platform: ac213 variant: 4g
        dtb 0 soc: g12a   plat: u212   vari: 4g
        dtb 1 soc: sm1   plat: ac213   vari: 2g
        dtb 2 soc: sm1   plat: ac213   vari: 4g
      Find match dtb: 2
start dts,buffer=00000000d3d7b620,dt_addr=00000000d3da4e20
get_partition_from_dts() 92: ret 0
      Amlogic multi-dtb tool
      Multi dtb detected
      Multi dtb tool version: v2 .
      Support 3 dtbs.
        aml_dt soc: sm1 platform: ac213 variant: 4g
        dtb 0 soc: g12a   plat: u212   vari: 4g
        dtb 1 soc: sm1   plat: ac213   vari: 2g
        dtb 2 soc: sm1   plat: ac213   vari: 4g
      Find match dtb: 2
parts: 1
00:      data   ffffffffffffffff 4
init_part() 282: PART_TYPE_DOS
eMMC/TSD partition table have been checked OK!
crc32_s:0x1577dad == storage crc_pattern:0x1577dad!!!
crc32_s:0xee152b83 == storage crc_pattern:0xee152b83!!!
crc32_s:0x79f50f07 == storage crc_pattern:0x79f50f07!!!
mmc env offset: 0x7400000
In:    serial
Out:   serial
Err:   serial
reboot_mode=cold_boot
[store]To run cmd[emmc dtb_read 0x1000000 0x40000]
_verify_dtb_checksum()-3476: calc b646bac5, store b646bac5
_verify_dtb_checksum()-3476: calc b646bac5, store b646bac5
dtb_read()-3691: total valid 2
update_old_dtb()-3672: do nothing
      Amlogic multi-dtb tool
      Multi dtb detected
      Multi dtb tool version: v2 .
      Support 3 dtbs.
        aml_dt soc: sm1 platform: ac213 variant: 4g
        dtb 0 soc: g12a   plat: u212   vari: 4g
        dtb 1 soc: sm1   plat: ac213   vari: 2g
        dtb 2 soc: sm1   plat: ac213   vari: 4g
      Find match dtb: 2
amlkey_init() enter!
[EFUSE_MSG]keynum is 4
vpu: driver version: v20190313
vpu: detect chip type: 11
vpu: clk_level default: 7(666667000Hz), max: 7(666667000Hz)
vpu: clk_level in dts: 7
vpu: vpu_power_on
vpu: set_vpu_clk
vpu: set clk: 666667000Hz, readback: 666666667Hz(0x100)
vpu: set_vpu_clk finish
vpu: vpu_module_init_config
vpp: vpp_init
vpp: vpp osd2 matrix rgb2yuv..............
hdr_func 4, hdr_process_select 0x1
cvbs: cpuid:0x2b
cvbs: find performance_pal config
Net:   dwmac.ff3f0000amlkey_init() enter!
amlkey_init() 71: already init!
[EFUSE_MSG]keynum is 4
MACADDR:02:00:00:27:13:01(from chipid)

CONFIG_AVB2: null
Start read misc partition datas!
Cannot find dev.
amlmmc cmd <NULL> failed

store - STORE sub-system

Usage:
store init flag
store read name addr off|partition size
    read 'size' bytes starting at offset 'off'
    to/from memory address 'addr', skipping bad blocks.
store write name addr off|partition size
    write 'size' bytes starting at offset 'off'
    to/from memory address 'addr', skipping bad blocks.
store rom_write add off size.
        write uboot to the boot device
store erase boot/data:
        erase the area which is uboot or data
store erase partition <partition_name>:
        erase the area which partition in u-boot
store erase dtb
store erase key
store disprotect key
store rom_protect on/off
store scrub off|partition size
        scrub the area from offset and size
store dtb iread/read/write addr <size>
        read/write dtb, size is optional
store key read/write addr <size>
        read/write key, size is optional
store ddr_parameter read/write addr <size>
        read/write ddr parameter, size is optional
store mbr addr
   update mbr/partition table by dtb
store bootlog
   show boot logs

[burnup]Err:store_read_ops,L101:cmd failed, ret=1, [store  read misc 0xd3d75090                                                                                                                                                               0x0  0x820]
failed to store read misc.
info->magic =
info->version_major = 0
info->version_minor = 0
info->slots[0].priority = 0
info->slots[0].tries_remaining = 0
info->slots[0].successful_boot = 0
info->slots[1].priority = 0
info->slots[1].tries_remaining = 0
info->slots[1].successful_boot = 0
info->crc32 = 0
Magic  is incorrect.
boot-info is invalid. Resetting.
save boot-info
info->magic =
info->version_major = 1
info->version_minor = 0
info->slots[0].priority = 15
info->slots[0].tries_remaining = 7
info->slots[0].successful_boot = 0
info->slots[1].priority = 14
info->slots[1].tries_remaining = 7
info->slots[1].successful_boot = 0
info->crc32 = -1075449479
Cannot find dev.
amlmmc cmd <NULL> failed

store - STORE sub-system

Usage:
store init flag
store read name addr off|partition size
    read 'size' bytes starting at offset 'off'
    to/from memory address 'addr', skipping bad blocks.
store write name addr off|partition size
    write 'size' bytes starting at offset 'off'
    to/from memory address 'addr', skipping bad blocks.
store rom_write add off size.
        write uboot to the boot device
store erase boot/data:
        erase the area which is uboot or data
store erase partition <partition_name>:
        erase the area which partition in u-boot
store erase dtb
store erase key
store disprotect key
store rom_protect on/off
store scrub off|partition size
        scrub the area from offset and size
store dtb iread/read/write addr <size>
        read/write dtb, size is optional
store key read/write addr <size>
        read/write key, size is optional
store ddr_parameter read/write addr <size>
        read/write ddr parameter, size is optional
store mbr addr
   update mbr/partition table by dtb
store bootlog
   show boot logs

[burnup]Err:store_write_ops,L165:cmd [store  write misc 0xd3d75090  0x0  0x820]                                                                                                                                                              failed active slot = 0
wipe_data=successful
wipe_cache=successful
upgrade_step=2
reboot_mode:::: cold_boot
s_version: U-Boot 2015.01
amlkey_init() enter!
amlkey_init() 71: already init!
[EFUSE_MSG]keynum is 4
[KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet
[KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet
[KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet
[KM]Error:f[keymanage_dts_get_key_device]L105:oemkey key name is not exist
[KM]Error:f[_get_km_ops_by_name]L240:key oemkey not know device 4
[KM]Error:f[key_manage_query_exist]L554:There isn't dts cfg for key[oemkey]
[KM]Error:f[key_manage_query_size]L511:Fail in query key exist
hpd_state=0
do_hpd_detect: hdmimode=2160p30hz
do_hpd_detect: colorattribute=444,8bit
Saving Environment to aml-storage...
mmc env offset: 0x7400000
Writing to MMC(1)... done
no sink, fallback to 720p60hz[4]
hdr mode is 0
dv  mode is ver:0  len: 0
hdr10+ mode is 0
read hdmichecksum 0x00000000, colorattribute 444,8bit
read hdmimode 2160p30hz, colorspace <NULL>, colordepth <NULL>
do_get_parse_edid: autoMode = false, manualMode=95
isYuv4kSink: false, maxTMDSRate=150
do_get_parse_edid: non-yuv4k sink: inColorSpace: HDMI_COLOR_FORMAT_RGB
do_get_parse_edid: default inColorDepth: HDMI_COLOR_DEPTH_24B
TV is same, initial mode is: 576cvbs attr: 444,8bit
dolby_status 0
dolby_status 0
dolby_vision_process: no tv and dv disabled
Saving Environment to aml-storage...
mmc env offset: 0x7400000
Writing to MMC(1)... done
[OSD]load fb addr from dts:/meson-fb
[OSD]load fb addr from dts:/fb
[OSD]set initrd_high: 0xdf800000
[OSD]fb_addr for logo: 0xdf800000
[OSD]load fb addr from dts:/meson-fb
[OSD]load fb addr from dts:/fb
[OSD]fb_addr for logo: 0xdf800000
[OSD]VPP_OFIFO_SIZE:0xfff01fff
[CANVAS]canvas init
[CANVAS]addr=0xdf800000 width=3840, height=2160
Cannot find dev.
amlmmc cmd <NULL> failed

store - STORE sub-system

Usage:
store init flag
store read name addr off|partition size
    read 'size' bytes starting at offset 'off'
    to/from memory address 'addr', skipping bad blocks.
store write name addr off|partition size
    write 'size' bytes starting at offset 'off'
    to/from memory address 'addr', skipping bad blocks.
store rom_write add off size.
        write uboot to the boot device
store erase boot/data:
        erase the area which is uboot or data
store erase partition <partition_name>:
        erase the area which partition in u-boot
store erase dtb
store erase key
store disprotect key
store rom_protect on/off
store scrub off|partition size
        scrub the area from offset and size
store dtb iread/read/write addr <size>
        read/write dtb, size is optional
store key read/write addr <size>
        read/write key, size is optional
store ddr_parameter read/write addr <size>
        read/write ddr parameter, size is optional
store mbr addr
   update mbr/partition table by dtb
store bootlog
   show boot logs

[burnup]Err:store_read_ops,L101:cmd failed, ret=1, [store  read logo 0x1080000                                                                                                                                                               0x0  0x2000]
Err imgread(L563):Fail to read 0x2000B from part[logo] at offset 0
There is no valid bmp file at the given address
[OSD]osd_hw.free_dst_data: 0,719,0,575
[OSD]osd1_update_disp_freescale_enable
vpp: vpp_matrix_update: 2
cvbs_performance_enhancement
cvbs_config_hdmipll_g12a
cvbs_set_vid2_clk
dolby_status 0
dolby_status 0
hdr_packet
vpp: hdr_policy = 0
vpp: Rx hdr_info.hdr_sup_eotf_smpte_st_2084 = 0
s_version: U-Boot 2015.01
amlkey_init() enter!
amlkey_init() 71: already init!
[EFUSE_MSG]keynum is 4
[KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet
[KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet
[KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet
[KM]Error:f[keymanage_dts_get_key_device]L105:oemkey key name is not exist
[KM]Error:f[_get_km_ops_by_name]L240:key oemkey not know device 4
[KM]Error:f[key_manage_query_exist]L554:There isn't dts cfg for key[oemkey]
[KM]Error:f[key_manage_query_size]L511:Fail in query key exist
gpio: pin GPIOAO_3 (gpio 3) value is 1
SARADC channel(2) is 0x3fc.
saradc - saradc sub-system

Usage:
saradc saradc open <channel>    - open a SARADC channel
saradc close    - close the SARADC
saradc getval   - get the value in current channel
saradc test     - test the SARADC by channel-7
saradc get_in_range <min> <max> - return 0 if current value in the range of curr                                                                                                                                                             ent channel

Command: bcb uboot-command
Start read misc partition datas!
Cannot find dev.
amlmmc cmd <NULL> failed

store - STORE sub-system

Usage:
store init flag
store read name addr off|partition size
    read 'size' bytes starting at offset 'off'
    to/from memory address 'addr', skipping bad blocks.
store write name addr off|partition size
    write 'size' bytes starting at offset 'off'
    to/from memory address 'addr', skipping bad blocks.
store rom_write add off size.
        write uboot to the boot device
store erase boot/data:
        erase the area which is uboot or data
store erase partition <partition_name>:
        erase the area which partition in u-boot
store erase dtb
store erase key
store disprotect key
store rom_protect on/off
store scrub off|partition size
        scrub the area from offset and size
store dtb iread/read/write addr <size>
        read/write dtb, size is optional
store key read/write addr <size>
        read/write key, size is optional
store ddr_parameter read/write addr <size>
        read/write ddr parameter, size is optional
store mbr addr
   update mbr/partition table by dtb
store bootlog
   show boot logs

[burnup]Err:store_read_ops,L101:cmd failed, ret=1, [store  read misc 0xd3d75080                                                                                                                                                               0x0  0x440]
failed to store read misc.
bcb - bcb

Usage:
bcb
This command will run some commands which saved in misc
partition by mark to decide whether execute command!
Command format:
  bcb bcb_mark
Example:
  /dev/block/misc partiton is saved some contents:
  uboot-command
  N/A
  setenv aa 11;setenv bb 22;setenv cc 33;saveenv;
So you can execute command: bcb uboot-command
InUsbBurn
wait for phy ready count is 0
noSof
sof timeout, reset usb phy tuning
s_version: U-Boot 2015.01
amlkey_init() enter!
amlkey_init() 71: already init!
[EFUSE_MSG]keynum is 4
[KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet
[KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet
[KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet
[KM]Error:f[keymanage_dts_get_key_device]L105:oemkey key name is not exist
[KM]Error:f[_get_km_ops_by_name]L240:key oemkey not know device 4
[KM]Error:f[key_manage_query_exist]L554:There isn't dts cfg for key[oemkey]
[KM]Error:f[key_manage_query_size]L511:Fail in query key exist
Hit Enter or space or Ctrl+C key to stop autoboot -- :  0
card out
(Re)start USB...
USB0:   USB3.0 XHCI init start
Register 3000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus 0 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
** Bad device usb 0 **
** Bad device usb 1 **
** Bad device usb 2 **
** Bad device usb 3 **
reading emmc_autoscript
831 bytes read in 3 ms (270.5 KiB/s)
## Executing script at 01020000
reading u-boot.emmc
** Unable to read file u-boot.emmc **
reading uEnv.txt
362 bytes read in 4 ms (87.9 KiB/s)
reading /zImage
25401856 bytes read in 723 ms (33.5 MiB/s)
reading /uInitrd
8198016 bytes read in 235 ms (33.3 MiB/s)
reading /dtb/amlogic/meson-sm1-x96-max-plus-q1.dtb
71217 bytes read in 17 ms (4 MiB/s)
## Error: "mac" not defined
## Error: "eth_mac" not defined
ethaddr=02:00:00:27:13:01
[rsvmem] get fdtaddr NULL!
rsvmem - reserve memory

Usage:
rsvmem check                   - check reserved memory
rsvmem dump                    - dump reserved memory

rsvmem check failed
## Loading init Ramdisk from Legacy Image at 13000000 ...
   Image Name:   uInitrd
   Image Type:   AArch64 Linux RAMDisk Image (gzip compressed)
   Data Size:    8197952 Bytes = 7.8 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
[store]Is good fdt check header, no need decrypt!
active_slot is normal
get partition info failed !!
amlmmc - AMLMMC sub system

Usage:
amlmmc read  <partition_name> ram_addr addr_byte# cnt_byte
amlmmc write <partition_name> ram_addr addr_byte# cnt_byte
amlmmc erase <partition_name> addr_byte# cnt_byte
amlmmc erase <partition_name>/<device num>
amlmmc rescan <device_num>
amlmmc part <device_num> - show partition infomation of mmc
amlmmc list - lists available devices
amlmmc env -  display env partition offset
amlmmc switch <device_num> <part name> - part name : boot0, boot1, user
amlmmc status <device_num> - read sd/emmc device status
amlmmc ext_csd <device_num> <byte> - read sd/emmc device EXT_CSD [byte]
amlmmc ext_csd <device_num> <byte> <value> - write sd/emmc device EXT_CSD [byte]                                                                                                                                                              value
amlmmc response <device_num> - read sd/emmc last command response
amlmmc controller <device_num> - read sd/emmc controller register
amlmmc write_protect <partition_name> <write_protect_type>
        - set write protect on partition through power_on or temporary
amlmmc write_protect <addr_base16> <cnt_base10> <write_protect_type>
        - set write protect on specified address through power_on or temporary
amlmmc send_wp_status <partition_name> send protect status of partition
amlmmc send_wp_status <addr_base16> <cnt_base10> send protect status on specifie                                                                                                                                                             d address
amlmmc send_wp_type <partition_name> send protect type of partition
amlmmc send_wp_type <addr_base16> <cnt_base10> send protect type on specified ad                                                                                                                                                             dress
amlmmc clear_wp <partition_name> clear write protect of partition
amlmmc clear_wp <addr_base16> <cnt_base10> clear write protect on specified addr                                                                                                                                                             esst
amlmmc ds <dev_num> <val> set driver strength
amlmmc key - disprotect key partition

amlmmc cmd <NULL> failed
store - STORE sub-system

Usage:
store init flag
store read name addr off|partition size
    read 'size' bytes starting at offset 'off'
    to/from memory address 'addr', skipping bad blocks.
store write name addr off|partition size
    write 'size' bytes starting at offset 'off'
    to/from memory address 'addr', skipping bad blocks.
store rom_write add off size.
        write uboot to the boot device
store erase boot/data:
        erase the area which is uboot or data
store erase partition <partition_name>:
        erase the area which partition in u-boot
store erase dtb
store erase key
store disprotect key
store rom_protect on/off
store scrub off|partition size
        scrub the area from offset and size
store dtb iread/read/write addr <size>
        read/write dtb, size is optional
store key read/write addr <size>
        read/write key, size is optional
store ddr_parameter read/write addr <size>
        read/write ddr parameter, size is optional
store mbr addr
   update mbr/partition table by dtb
store bootlog
   show boot logs

No dtbo patitions found
load dtb from 0x1000000 ......
      Amlogic multi-dtb tool
      Single dtb detected
## Flattened Device Tree blob at 01000000
   Booting using the fdt blob at 0x1000000
No valid dtbo image found
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
[rsvmem] fdt get prop fail.
   Loading Ramdisk to d35a2000, end d3d73740 ... OK
   Loading Device Tree to 000000001ffeb000, end 000000001ffff630 ... OK
fdt_fixup_memory_banks, reg:000000001fff67f4
DTS already have 'reg' property

Starting kernel ...

uboot time: 6141379 us

`

[tv4you2016]

[tv4you2016]

[ophub]

ls /boot/dtb/amlogic/meson-sm1-x96-max-plus-q1.dtb
ls /boot/u-boot.ext
ls /boot/u-boot.emmc

[tv4you2016]

demo 2 minutes I have to install again because I don't have access