Add .circleci/config.yml #2

MumetNgoding · 2020-07-23T22:56:53Z

No description provided.

commit 311eab8 upstream. devm_gpiod_get_index() doesn't return NULL but -ENOENT when the requested GPIO doesn't exist, leading to the following messages: [ 2.742468] gpiod_direction_input: invalid GPIO (errorpointer) [ 2.748147] can't set direction for gpio #2: -2 [ 2.753081] gpiod_direction_input: invalid GPIO (errorpointer) [ 2.758724] can't set direction for gpio #3: -2 [ 2.763666] gpiod_direction_output: invalid GPIO (errorpointer) [ 2.769394] can't set direction for gpio #4: -2 [ 2.774341] gpiod_direction_input: invalid GPIO (errorpointer) [ 2.779981] can't set direction for gpio #5: -2 [ 2.784545] ff000a20.serial: ttyCPM1 at MMIO 0xfff00a20 (irq = 39, base_baud = 8250000) is a CPM UART Use devm_gpiod_get_index_optional() instead. At the same time, handle the error case and properly exit with an error. Fixes: 97cbaf2 ("tty: serial: cpm_uart: Convert to use GPIO descriptors") Cc: [email protected] Cc: Linus Walleij <[email protected]> Signed-off-by: Christophe Leroy <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Link: https://lore.kernel.org/r/694a25fdce548c5ee8b060ef6a4b02746b8f25c0.1591986307.git.christophe.leroy@csgroup.eu Signed-off-by: Greg Kroah-Hartman <[email protected]>

devm_gpiod_get_index() doesn't return NULL but -ENOENT when the requested GPIO doesn't exist, leading to the following messages: [ 2.742468] gpiod_direction_input: invalid GPIO (errorpointer) [ 2.748147] can't set direction for gpio #2: -2 [ 2.753081] gpiod_direction_input: invalid GPIO (errorpointer) [ 2.758724] can't set direction for gpio #3: -2 [ 2.763666] gpiod_direction_output: invalid GPIO (errorpointer) [ 2.769394] can't set direction for gpio #4: -2 [ 2.774341] gpiod_direction_input: invalid GPIO (errorpointer) [ 2.779981] can't set direction for gpio #5: -2 [ 2.784545] ff000a20.serial: ttyCPM1 at MMIO 0xfff00a20 (irq = 39, base_baud = 8250000) is a CPM UART Use devm_gpiod_get_index_optional() instead. At the same time, handle the error case and properly exit with an error. Fixes: 97cbaf2 ("tty: serial: cpm_uart: Convert to use GPIO descriptors") Cc: [email protected] Cc: Linus Walleij <[email protected]> Signed-off-by: Christophe Leroy <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Link: https://lore.kernel.org/r/694a25fdce548c5ee8b060ef6a4b02746b8f25c0.1591986307.git.christophe.leroy@csgroup.eu Signed-off-by: Greg Kroah-Hartman <[email protected]>

In pci_disable_sriov(), i.e., # echo 0 > /sys/class/net/enp11s0f1np1/device/sriov_numvfs iommu_release_device iommu_group_remove_device arm_smmu_domain_free kfree(smmu_domain) Later, iommu_release_device arm_smmu_release_device arm_smmu_detach_dev spin_lock_irqsave(&smmu_domain->devices_lock, would trigger an use-after-free. Fixed it by call arm_smmu_release_device() first before iommu_group_remove_device(). BUG: KASAN: use-after-free in __lock_acquire+0x3458/0x4440 __lock_acquire at kernel/locking/lockdep.c:4250 Read of size 8 at addr ffff0089df1a6f68 by task bash/3356 CPU: 5 PID: 3356 Comm: bash Not tainted 5.8.0-rc3-next-20200630 #2 Hardware name: HPE Apollo 70 /C01_APACHE_MB , BIOS L50_5.13_1.11 06/18/2019 Call trace: dump_backtrace+0x0/0x398 show_stack+0x14/0x20 dump_stack+0x140/0x1b8 print_address_description.isra.12+0x54/0x4a8 kasan_report+0x134/0x1b8 __asan_report_load8_noabort+0x2c/0x50 __lock_acquire+0x3458/0x4440 lock_acquire+0x204/0xf10 _raw_spin_lock_irqsave+0xf8/0x180 arm_smmu_detach_dev+0xd8/0x4a0 arm_smmu_detach_dev at drivers/iommu/arm-smmu-v3.c:2776 arm_smmu_release_device+0xb4/0x1c8 arm_smmu_disable_pasid at drivers/iommu/arm-smmu-v3.c:2754 (inlined by) arm_smmu_release_device at drivers/iommu/arm-smmu-v3.c:3000 iommu_release_device+0xc0/0x178 iommu_release_device at drivers/iommu/iommu.c:302 iommu_bus_notifier+0x118/0x160 notifier_call_chain+0xa4/0x128 __blocking_notifier_call_chain+0x70/0xa8 blocking_notifier_call_chain+0x14/0x20 device_del+0x618/0xa00 pci_remove_bus_device+0x108/0x2d8 pci_stop_and_remove_bus_device+0x1c/0x28 pci_iov_remove_virtfn+0x228/0x368 sriov_disable+0x8c/0x348 pci_disable_sriov+0x5c/0x70 mlx5_core_sriov_configure+0xd8/0x260 [mlx5_core] sriov_numvfs_store+0x240/0x318 dev_attr_store+0x38/0x68 sysfs_kf_write+0xdc/0x128 kernfs_fop_write+0x23c/0x448 __vfs_write+0x54/0xe8 vfs_write+0x124/0x3f0 ksys_write+0xe8/0x1b8 __arm64_sys_write+0x68/0x98 do_el0_svc+0x124/0x220 el0_sync_handler+0x260/0x408 el0_sync+0x140/0x180 Allocated by task 3356: save_stack+0x24/0x50 __kasan_kmalloc.isra.13+0xc4/0xe0 kasan_kmalloc+0xc/0x18 kmem_cache_alloc_trace+0x1ec/0x318 arm_smmu_domain_alloc+0x54/0x148 iommu_group_alloc_default_domain+0xc0/0x440 iommu_probe_device+0x1c0/0x308 iort_iommu_configure+0x434/0x518 acpi_dma_configure+0xf0/0x128 pci_dma_configure+0x114/0x160 really_probe+0x124/0x6d8 driver_probe_device+0xc4/0x180 __device_attach_driver+0x184/0x1e8 bus_for_each_drv+0x114/0x1a0 __device_attach+0x19c/0x2a8 device_attach+0x10/0x18 pci_bus_add_device+0x70/0xf8 pci_iov_add_virtfn+0x7b4/0xb40 sriov_enable+0x5c8/0xc30 pci_enable_sriov+0x64/0x80 mlx5_core_sriov_configure+0x58/0x260 [mlx5_core] sriov_numvfs_store+0x1c0/0x318 dev_attr_store+0x38/0x68 sysfs_kf_write+0xdc/0x128 kernfs_fop_write+0x23c/0x448 __vfs_write+0x54/0xe8 vfs_write+0x124/0x3f0 ksys_write+0xe8/0x1b8 __arm64_sys_write+0x68/0x98 do_el0_svc+0x124/0x220 el0_sync_handler+0x260/0x408 el0_sync+0x140/0x180 Freed by task 3356: save_stack+0x24/0x50 __kasan_slab_free+0x124/0x198 kasan_slab_free+0x10/0x18 slab_free_freelist_hook+0x110/0x298 kfree+0x128/0x668 arm_smmu_domain_free+0xf4/0x1a0 iommu_group_release+0xec/0x160 kobject_put+0xf4/0x238 kobject_del+0x110/0x190 kobject_put+0x1e4/0x238 iommu_group_remove_device+0x394/0x938 iommu_release_device+0x9c/0x178 iommu_release_device at drivers/iommu/iommu.c:300 iommu_bus_notifier+0x118/0x160 notifier_call_chain+0xa4/0x128 __blocking_notifier_call_chain+0x70/0xa8 blocking_notifier_call_chain+0x14/0x20 device_del+0x618/0xa00 pci_remove_bus_device+0x108/0x2d8 pci_stop_and_remove_bus_device+0x1c/0x28 pci_iov_remove_virtfn+0x228/0x368 sriov_disable+0x8c/0x348 pci_disable_sriov+0x5c/0x70 mlx5_core_sriov_configure+0xd8/0x260 [mlx5_core] sriov_numvfs_store+0x240/0x318 dev_attr_store+0x38/0x68 sysfs_kf_write+0xdc/0x128 kernfs_fop_write+0x23c/0x448 __vfs_write+0x54/0xe8 vfs_write+0x124/0x3f0 ksys_write+0xe8/0x1b8 __arm64_sys_write+0x68/0x98 do_el0_svc+0x124/0x220 el0_sync_handler+0x260/0x408 el0_sync+0x140/0x180 The buggy address belongs to the object at ffff0089df1a6e00 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 360 bytes inside of 512-byte region [ffff0089df1a6e00, ffff0089df1a7000) The buggy address belongs to the page: page:ffffffe02257c680 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff0089df1a1400 flags: 0x7ffff800000200(slab) raw: 007ffff800000200 ffffffe02246b8c8 ffffffe02257ff88 ffff000000320680 raw: ffff0089df1a1400 00000000002a000e 00000001ffffffff ffff0089df1a5001 page dumped because: kasan: bad access detected page->mem_cgroup:ffff0089df1a5001 Memory state around the buggy address: ffff0089df1a6e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff0089df1a6e80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff0089df1a6f00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff0089df1a6f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff0089df1a7000: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Fixes: a6a4c7e ("iommu: Add probe_device() and release_device() call-backs") Signed-off-by: Qian Cai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>

Jakub Sitnicki says: ==================== This patch set prepares ground for link-based multi-prog attachment for future netns attach types, with BPF_SK_LOOKUP attach type in mind [0]. Two changes are needed in order to attach and run a series of BPF programs: 1) an bpf_prog_array of programs to run (patch #2), and 2) a list of attached links to keep track of attachments (patch #3). Nothing changes for BPF flow_dissector. Just as before only one program can be attached to netns. In v3 I've simplified patch #2 that introduces bpf_prog_array to take advantage of the fact that it will hold at most one program for now. In particular, I'm no longer using bpf_prog_array_copy. It turned out to be less suitable for link operations than I thought as it fails to append the same BPF program. bpf_prog_array_replace_item is also gone, because we know we always want to replace the first element in prog_array. Naturally the code that handles bpf_prog_array will need change once more when there is a program type that allows multi-prog attachment. But I feel it will be better to do it gradually and present it together with tests that actually exercise multi-prog code paths. [0] https://lore.kernel.org/bpf/[email protected]/ v2 -> v3: - Don't check if run_array is null in link update callback. (Martin) - Allow updating the link with the same BPF program. (Andrii) - Add patch #4 with a test for the above case. - Kill bpf_prog_array_replace_item. Access the run_array directly. - Switch from bpf_prog_array_copy() to bpf_prog_array_alloc(1, ...). - Replace rcu_deref_protected & RCU_INIT_POINTER with rcu_replace_pointer. - Drop Andrii's Ack from patch #2. Code changed. v1 -> v2: - Show with a (void) cast that bpf_prog_array_replace_item() return value is ignored on purpose. (Andrii) - Explain why bpf-cgroup cannot replace programs in bpf_prog_array based on bpf_prog pointer comparison in patch #2 description. (Andrii) ==================== Signed-off-by: Alexei Starovoitov <[email protected]>

…kernel/git/kvmarm/kvmarm into kvm-master KVM/arm fixes for 5.8, take #2 - Make sure a vcpu becoming non-resident doesn't race against the doorbell delivery - Only advertise pvtime if accounting is enabled - Return the correct error code if reset fails with SVE - Make sure that pseudo-NMI functions are annotated as __always_inline

In BRM_status_show(), if the condition "!ioc->is_warpdrive" tested on entry to the function is true, a "goto out" is called. This results in unlocking ioc->pci_access_mutex without this mutex lock being taken. This generates the following splat: [ 1148.539883] mpt3sas_cm2: BRM_status_show: BRM attribute is only for warpdrive [ 1148.547184] [ 1148.548708] ===================================== [ 1148.553501] WARNING: bad unlock balance detected! [ 1148.558277] 5.8.0-rc3+ #827 Not tainted [ 1148.562183] ------------------------------------- [ 1148.566959] cat/5008 is trying to release lock (&ioc->pci_access_mutex) at: [ 1148.574035] [<ffffffffc070b7a3>] BRM_status_show+0xd3/0x100 [mpt3sas] [ 1148.580574] but there are no more locks to release! [ 1148.585524] [ 1148.585524] other info that might help us debug this: [ 1148.599624] 3 locks held by cat/5008: [ 1148.607085] #0: ffff92aea3e392c0 (&p->lock){+.+.}-{3:3}, at: seq_read+0x34/0x480 [ 1148.618509] #1: ffff922ef14c4888 (&of->mutex){+.+.}-{3:3}, at: kernfs_seq_start+0x2a/0xb0 [ 1148.630729] #2: ffff92aedb5d7310 (kn->active#224){.+.+}-{0:0}, at: kernfs_seq_start+0x32/0xb0 [ 1148.643347] [ 1148.643347] stack backtrace: [ 1148.655259] CPU: 73 PID: 5008 Comm: cat Not tainted 5.8.0-rc3+ #827 [ 1148.665309] Hardware name: HGST H4060-S/S2600STB, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [ 1148.678394] Call Trace: [ 1148.684750] dump_stack+0x78/0xa0 [ 1148.691802] lock_release.cold+0x45/0x4a [ 1148.699451] __mutex_unlock_slowpath+0x35/0x270 [ 1148.707675] BRM_status_show+0xd3/0x100 [mpt3sas] [ 1148.716092] dev_attr_show+0x19/0x40 [ 1148.723664] sysfs_kf_seq_show+0x87/0x100 [ 1148.731193] seq_read+0xbc/0x480 [ 1148.737882] vfs_read+0xa0/0x160 [ 1148.744514] ksys_read+0x58/0xd0 [ 1148.751129] do_syscall_64+0x4c/0xa0 [ 1148.757941] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 1148.766240] RIP: 0033:0x7f1230566542 [ 1148.772957] Code: Bad RIP value. [ 1148.779206] RSP: 002b:00007ffeac1bcac8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 1148.790063] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f1230566542 [ 1148.800284] RDX: 0000000000020000 RSI: 00007f1223460000 RDI: 0000000000000003 [ 1148.810474] RBP: 00007f1223460000 R08: 00007f122345f010 R09: 0000000000000000 [ 1148.820641] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000000000 [ 1148.830728] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000 Fix this by returning immediately instead of jumping to the out label. Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Johannes Thumshirn <[email protected]> Acked-by: Sreekanth Reddy <[email protected]> Signed-off-by: Damien Le Moal <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>

Ido Schimmel says: ==================== mlxsw: Various fixes Fix two issues found by syzkaller. Patch #1 removes inappropriate usage of WARN_ON() following memory allocation failure. Constantly triggered when syzkaller injects faults. Patch #2 fixes a use-after-free that can be triggered by 'devlink dev info' following a failed devlink reload. ==================== Signed-off-by: David S. Miller <[email protected]>

[ Upstream commit ab8b65b ] It is unsafe to traverse kvm->arch.spapr_tce_tables and stt->iommu_tables without the RCU read lock held. Also, add cond_resched_rcu() in places with the RCU read lock held that could take a while to finish. arch/powerpc/kvm/book3s_64_vio.c:76 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 no locks held by qemu-kvm/4265. stack backtrace: CPU: 96 PID: 4265 Comm: qemu-kvm Not tainted 5.7.0-rc4-next-20200508+ gregkh#2 Call Trace: [c000201a8690f720] [c000000000715948] dump_stack+0xfc/0x174 (unreliable) [c000201a8690f770] [c0000000001d9470] lockdep_rcu_suspicious+0x140/0x164 [c000201a8690f7f0] [c008000010b9fb48] kvm_spapr_tce_release_iommu_group+0x1f0/0x220 [kvm] [c000201a8690f870] [c008000010b8462c] kvm_spapr_tce_release_vfio_group+0x54/0xb0 [kvm] [c000201a8690f8a0] [c008000010b84710] kvm_vfio_destroy+0x88/0x140 [kvm] [c000201a8690f8f0] [c008000010b7d488] kvm_put_kvm+0x370/0x600 [kvm] [c000201a8690f990] [c008000010b7e3c0] kvm_vm_release+0x38/0x60 [kvm] [c000201a8690f9c0] [c0000000005223f4] __fput+0x124/0x330 [c000201a8690fa20] [c000000000151cd8] task_work_run+0xb8/0x130 [c000201a8690fa70] [c0000000001197e8] do_exit+0x4e8/0xfa0 [c000201a8690fb70] [c00000000011a374] do_group_exit+0x64/0xd0 [c000201a8690fbb0] [c000000000132c90] get_signal+0x1f0/0x1200 [c000201a8690fcc0] [c000000000020690] do_notify_resume+0x130/0x3c0 [c000201a8690fda0] [c000000000038d64] syscall_exit_prepare+0x1a4/0x280 [c000201a8690fe20] [c00000000000c8f8] system_call_common+0xf8/0x278 ==== arch/powerpc/kvm/book3s_64_vio.c:368 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by qemu-kvm/4264: #0: c000201ae2d000d8 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0xdc/0x950 [kvm] gregkh#1: c000200c9ed0c468 (&kvm->srcu){....}-{0:0}, at: kvmppc_h_put_tce+0x88/0x340 [kvm] ==== arch/powerpc/kvm/book3s_64_vio.c:108 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by qemu-kvm/4257: #0: c000200b1b363a40 (&kv->lock){+.+.}-{3:3}, at: kvm_vfio_set_attr+0x598/0x6c0 [kvm] ==== arch/powerpc/kvm/book3s_64_vio.c:146 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by qemu-kvm/4257: #0: c000200b1b363a40 (&kv->lock){+.+.}-{3:3}, at: kvm_vfio_set_attr+0x598/0x6c0 [kvm] Signed-off-by: Qian Cai <[email protected]> Signed-off-by: Paul Mackerras <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 027690c ] I made every global per-network-namespace instead. But perhaps doing that to this slab was a step too far. The kmem_cache_create call in our net init method also seems to be responsible for this lockdep warning: [ 45.163710] Unable to find swap-space signature [ 45.375718] trinity-c1 (855): attempted to duplicate a private mapping with mremap. This is not supported. [ 46.055744] futex_wake_op: trinity-c1 tries to shift op by -209; fix this program [ 51.011723] [ 51.013378] ====================================================== [ 51.013875] WARNING: possible circular locking dependency detected [ 51.014378] 5.2.0-rc2 gregkh#1 Not tainted [ 51.014672] ------------------------------------------------------ [ 51.015182] trinity-c2/886 is trying to acquire lock: [ 51.015593] 000000005405f099 (slab_mutex){+.+.}, at: slab_attr_store+0xa2/0x130 [ 51.016190] [ 51.016190] but task is already holding lock: [ 51.016652] 00000000ac662005 (kn->count#43){++++}, at: kernfs_fop_write+0x286/0x500 [ 51.017266] [ 51.017266] which lock already depends on the new lock. [ 51.017266] [ 51.017909] [ 51.017909] the existing dependency chain (in reverse order) is: [ 51.018497] [ 51.018497] -> gregkh#1 (kn->count#43){++++}: [ 51.018956] __lock_acquire+0x7cf/0x1a20 [ 51.019317] lock_acquire+0x17d/0x390 [ 51.019658] __kernfs_remove+0x892/0xae0 [ 51.020020] kernfs_remove_by_name_ns+0x78/0x110 [ 51.020435] sysfs_remove_link+0x55/0xb0 [ 51.020832] sysfs_slab_add+0xc1/0x3e0 [ 51.021332] __kmem_cache_create+0x155/0x200 [ 51.021720] create_cache+0xf5/0x320 [ 51.022054] kmem_cache_create_usercopy+0x179/0x320 [ 51.022486] kmem_cache_create+0x1a/0x30 [ 51.022867] nfsd_reply_cache_init+0x278/0x560 [ 51.023266] nfsd_init_net+0x20f/0x5e0 [ 51.023623] ops_init+0xcb/0x4b0 [ 51.023928] setup_net+0x2fe/0x670 [ 51.024315] copy_net_ns+0x30a/0x3f0 [ 51.024653] create_new_namespaces+0x3c5/0x820 [ 51.025257] unshare_nsproxy_namespaces+0xd1/0x240 [ 51.025881] ksys_unshare+0x506/0x9c0 [ 51.026381] __x64_sys_unshare+0x3a/0x50 [ 51.026937] do_syscall_64+0x110/0x10b0 [ 51.027509] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 51.028175] [ 51.028175] -> #0 (slab_mutex){+.+.}: [ 51.028817] validate_chain+0x1c51/0x2cc0 [ 51.029422] __lock_acquire+0x7cf/0x1a20 [ 51.029947] lock_acquire+0x17d/0x390 [ 51.030438] __mutex_lock+0x100/0xfa0 [ 51.030995] mutex_lock_nested+0x27/0x30 [ 51.031516] slab_attr_store+0xa2/0x130 [ 51.032020] sysfs_kf_write+0x11d/0x180 [ 51.032529] kernfs_fop_write+0x32a/0x500 [ 51.033056] do_loop_readv_writev+0x21d/0x310 [ 51.033627] do_iter_write+0x2e5/0x380 [ 51.034148] vfs_writev+0x170/0x310 [ 51.034616] do_pwritev+0x13e/0x160 [ 51.035100] __x64_sys_pwritev+0xa3/0x110 [ 51.035633] do_syscall_64+0x110/0x10b0 [ 51.036200] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 51.036924] [ 51.036924] other info that might help us debug this: [ 51.036924] [ 51.037876] Possible unsafe locking scenario: [ 51.037876] [ 51.038556] CPU0 CPU1 [ 51.039130] ---- ---- [ 51.039676] lock(kn->count#43); [ 51.040084] lock(slab_mutex); [ 51.040597] lock(kn->count#43); [ 51.041062] lock(slab_mutex); [ 51.041320] [ 51.041320] *** DEADLOCK *** [ 51.041320] [ 51.041793] 3 locks held by trinity-c2/886: [ 51.042128] #0: 000000001f55e152 (sb_writers#5){.+.+}, at: vfs_writev+0x2b9/0x310 [ 51.042739] gregkh#1: 00000000c7d6c034 (&of->mutex){+.+.}, at: kernfs_fop_write+0x25b/0x500 [ 51.043400] gregkh#2: 00000000ac662005 (kn->count#43){++++}, at: kernfs_fop_write+0x286/0x500 Reported-by: kernel test robot <[email protected]> Fixes: 3ba7583 "drc containerization" Signed-off-by: J. Bruce Fields <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 2d3a8e2 ] In blkdev_get() we call __blkdev_get() to do some internal jobs and if there is some errors in __blkdev_get(), the bdput() is called which means we have released the refcount of the bdev (actually the refcount of the bdev inode). This means we cannot access bdev after that point. But acctually bdev is still accessed in blkdev_get() after calling __blkdev_get(). This results in use-after-free if the refcount is the last one we released in __blkdev_get(). Let's take a look at the following scenerio: CPU0 CPU1 CPU2 blkdev_open blkdev_open Remove disk bd_acquire blkdev_get __blkdev_get del_gendisk bdev_unhash_inode bd_acquire bdev_get_gendisk bd_forget failed because of unhashed bdput bdput (the last one) bdev_evict_inode access bdev => use after free [ 459.350216] BUG: KASAN: use-after-free in __lock_acquire+0x24c1/0x31b0 [ 459.351190] Read of size 8 at addr ffff88806c815a80 by task syz-executor.0/20132 [ 459.352347] [ 459.352594] CPU: 0 PID: 20132 Comm: syz-executor.0 Not tainted 4.19.90 gregkh#2 [ 459.353628] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 459.354947] Call Trace: [ 459.355337] dump_stack+0x111/0x19e [ 459.355879] ? __lock_acquire+0x24c1/0x31b0 [ 459.356523] print_address_description+0x60/0x223 [ 459.357248] ? __lock_acquire+0x24c1/0x31b0 [ 459.357887] kasan_report.cold+0xae/0x2d8 [ 459.358503] __lock_acquire+0x24c1/0x31b0 [ 459.359120] ? _raw_spin_unlock_irq+0x24/0x40 [ 459.359784] ? lockdep_hardirqs_on+0x37b/0x580 [ 459.360465] ? _raw_spin_unlock_irq+0x24/0x40 [ 459.361123] ? finish_task_switch+0x125/0x600 [ 459.361812] ? finish_task_switch+0xee/0x600 [ 459.362471] ? mark_held_locks+0xf0/0xf0 [ 459.363108] ? __schedule+0x96f/0x21d0 [ 459.363716] lock_acquire+0x111/0x320 [ 459.364285] ? blkdev_get+0xce/0xbe0 [ 459.364846] ? blkdev_get+0xce/0xbe0 [ 459.365390] __mutex_lock+0xf9/0x12a0 [ 459.365948] ? blkdev_get+0xce/0xbe0 [ 459.366493] ? bdev_evict_inode+0x1f0/0x1f0 [ 459.367130] ? blkdev_get+0xce/0xbe0 [ 459.367678] ? destroy_inode+0xbc/0x110 [ 459.368261] ? mutex_trylock+0x1a0/0x1a0 [ 459.368867] ? __blkdev_get+0x3e6/0x1280 [ 459.369463] ? bdev_disk_changed+0x1d0/0x1d0 [ 459.370114] ? blkdev_get+0xce/0xbe0 [ 459.370656] blkdev_get+0xce/0xbe0 [ 459.371178] ? find_held_lock+0x2c/0x110 [ 459.371774] ? __blkdev_get+0x1280/0x1280 [ 459.372383] ? lock_downgrade+0x680/0x680 [ 459.373002] ? lock_acquire+0x111/0x320 [ 459.373587] ? bd_acquire+0x21/0x2c0 [ 459.374134] ? do_raw_spin_unlock+0x4f/0x250 [ 459.374780] blkdev_open+0x202/0x290 [ 459.375325] do_dentry_open+0x49e/0x1050 [ 459.375924] ? blkdev_get_by_dev+0x70/0x70 [ 459.376543] ? __x64_sys_fchdir+0x1f0/0x1f0 [ 459.377192] ? inode_permission+0xbe/0x3a0 [ 459.377818] path_openat+0x148c/0x3f50 [ 459.378392] ? kmem_cache_alloc+0xd5/0x280 [ 459.379016] ? entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 459.379802] ? path_lookupat.isra.0+0x900/0x900 [ 459.380489] ? __lock_is_held+0xad/0x140 [ 459.381093] do_filp_open+0x1a1/0x280 [ 459.381654] ? may_open_dev+0xf0/0xf0 [ 459.382214] ? find_held_lock+0x2c/0x110 [ 459.382816] ? lock_downgrade+0x680/0x680 [ 459.383425] ? __lock_is_held+0xad/0x140 [ 459.384024] ? do_raw_spin_unlock+0x4f/0x250 [ 459.384668] ? _raw_spin_unlock+0x1f/0x30 [ 459.385280] ? __alloc_fd+0x448/0x560 [ 459.385841] do_sys_open+0x3c3/0x500 [ 459.386386] ? filp_open+0x70/0x70 [ 459.386911] ? trace_hardirqs_on_thunk+0x1a/0x1c [ 459.387610] ? trace_hardirqs_off_caller+0x55/0x1c0 [ 459.388342] ? do_syscall_64+0x1a/0x520 [ 459.388930] do_syscall_64+0xc3/0x520 [ 459.389490] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 459.390248] RIP: 0033:0x416211 [ 459.390720] Code: 75 14 b8 02 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 04 19 00 00 c3 48 83 ec 08 e8 0a fa ff ff 48 89 04 24 b8 02 00 00 00 0f 05 <48> 8b 3c 24 48 89 c2 e8 53 fa ff ff 48 89 d0 48 83 c4 08 48 3d 01 [ 459.393483] RSP: 002b:00007fe45dfe9a60 EFLAGS: 00000293 ORIG_RAX: 0000000000000002 [ 459.394610] RAX: ffffffffffffffda RBX: 00007fe45dfea6d4 RCX: 0000000000416211 [ 459.395678] RDX: 00007fe45dfe9b0a RSI: 0000000000000002 RDI: 00007fe45dfe9b00 [ 459.396758] RBP: 000000000076bf20 R08: 0000000000000000 R09: 000000000000000a [ 459.397930] R10: 0000000000000075 R11: 0000000000000293 R12: 00000000ffffffff [ 459.399022] R13: 0000000000000bd9 R14: 00000000004cdb80 R15: 000000000076bf2c [ 459.400168] [ 459.400430] Allocated by task 20132: [ 459.401038] kasan_kmalloc+0xbf/0xe0 [ 459.401652] kmem_cache_alloc+0xd5/0x280 [ 459.402330] bdev_alloc_inode+0x18/0x40 [ 459.402970] alloc_inode+0x5f/0x180 [ 459.403510] iget5_locked+0x57/0xd0 [ 459.404095] bdget+0x94/0x4e0 [ 459.404607] bd_acquire+0xfa/0x2c0 [ 459.405113] blkdev_open+0x110/0x290 [ 459.405702] do_dentry_open+0x49e/0x1050 [ 459.406340] path_openat+0x148c/0x3f50 [ 459.406926] do_filp_open+0x1a1/0x280 [ 459.407471] do_sys_open+0x3c3/0x500 [ 459.408010] do_syscall_64+0xc3/0x520 [ 459.408572] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 459.409415] [ 459.409679] Freed by task 1262: [ 459.410212] __kasan_slab_free+0x129/0x170 [ 459.410919] kmem_cache_free+0xb2/0x2a0 [ 459.411564] rcu_process_callbacks+0xbb2/0x2320 [ 459.412318] __do_softirq+0x225/0x8ac Fix this by delaying bdput() to the end of blkdev_get() which means we have finished accessing bdev. Fixes: 77ea887 ("implement in-kernel gendisk events handling") Reported-by: Hulk Robot <[email protected]> Signed-off-by: Jason Yan <[email protected]> Tested-by: Sedat Dilek <[email protected]> Reviewed-by: Jan Kara <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Dan Carpenter <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Jens Axboe <[email protected]> Cc: Ming Lei <[email protected]> Cc: Jan Kara <[email protected]> Cc: Dan Carpenter <[email protected]> Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit e5a15e1 upstream. The following kernel panic was captured when running nfs server over ocfs2, at that time ocfs2_test_inode_bit() was checking whether one inode locating at "blkno" 5 was valid, that is ocfs2 root inode, its "suballoc_slot" was OCFS2_INVALID_SLOT(65535) and it was allocted from //global_inode_alloc, but here it wrongly assumed that it was got from per slot inode alloctor which would cause array overflow and trigger kernel panic. BUG: unable to handle kernel paging request at 0000000000001088 IP: [<ffffffff816f6898>] _raw_spin_lock+0x18/0xf0 PGD 1e06ba067 PUD 1e9e7d067 PMD 0 Oops: 0002 [gregkh#1] SMP CPU: 6 PID: 24873 Comm: nfsd Not tainted 4.1.12-124.36.1.el6uek.x86_64 gregkh#2 Hardware name: Huawei CH121 V3/IT11SGCA1, BIOS 3.87 02/02/2018 RIP: _raw_spin_lock+0x18/0xf0 RSP: e02b:ffff88005ae97908 EFLAGS: 00010206 RAX: ffff88005ae98000 RBX: 0000000000001088 RCX: 0000000000000000 RDX: 0000000000020000 RSI: 0000000000000009 RDI: 0000000000001088 RBP: ffff88005ae97928 R08: 0000000000000000 R09: ffff880212878e00 R10: 0000000000007ff0 R11: 0000000000000000 R12: 0000000000001088 R13: ffff8800063c0aa8 R14: ffff8800650c27d0 R15: 000000000000ffff FS: 0000000000000000(0000) GS:ffff880218180000(0000) knlGS:ffff880218180000 CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000001088 CR3: 00000002033d0000 CR4: 0000000000042660 Call Trace: igrab+0x1e/0x60 ocfs2_get_system_file_inode+0x63/0x3a0 [ocfs2] ocfs2_test_inode_bit+0x328/0xa00 [ocfs2] ocfs2_get_parent+0xba/0x3e0 [ocfs2] reconnect_path+0xb5/0x300 exportfs_decode_fh+0xf6/0x2b0 fh_verify+0x350/0x660 [nfsd] nfsd4_putfh+0x4d/0x60 [nfsd] nfsd4_proc_compound+0x3d3/0x6f0 [nfsd] nfsd_dispatch+0xe0/0x290 [nfsd] svc_process_common+0x412/0x6a0 [sunrpc] svc_process+0x123/0x210 [sunrpc] nfsd+0xff/0x170 [nfsd] kthread+0xcb/0xf0 ret_from_fork+0x61/0x90 Code: 83 c2 02 0f b7 f2 e8 18 dc 91 ff 66 90 eb bf 0f 1f 40 00 55 48 89 e5 41 56 41 55 41 54 53 0f 1f 44 00 00 48 89 fb ba 00 00 02 00 <f0> 0f c1 17 89 d0 45 31 e4 45 31 ed c1 e8 10 66 39 d0 41 89 c6 RIP _raw_spin_lock+0x18/0xf0 CR2: 0000000000001088 ---[ end trace 7264463cd1aac8f9 ]--- Kernel panic - not syncing: Fatal exception Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Junxiao Bi <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Joel Becker <[email protected]> Cc: Jun Piao <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 440ab9e ] At times when I'm using kgdb I see a splat on my console about suspicious RCU usage. I managed to come up with a case that could reproduce this that looked like this: WARNING: suspicious RCU usage 5.7.0-rc4+ #609 Not tainted ----------------------------- kernel/pid.c:395 find_task_by_pid_ns() needs rcu_read_lock() protection! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 3 locks held by swapper/0/1: #0: ffffff81b6b8e988 (&dev->mutex){....}-{3:3}, at: __device_attach+0x40/0x13c gregkh#1: ffffffd01109e9e8 (dbg_master_lock){....}-{2:2}, at: kgdb_cpu_enter+0x20c/0x7ac gregkh#2: ffffffd01109ea90 (dbg_slave_lock){....}-{2:2}, at: kgdb_cpu_enter+0x3ec/0x7ac stack backtrace: CPU: 7 PID: 1 Comm: swapper/0 Not tainted 5.7.0-rc4+ #609 Hardware name: Google Cheza (rev3+) (DT) Call trace: dump_backtrace+0x0/0x1b8 show_stack+0x1c/0x24 dump_stack+0xd4/0x134 lockdep_rcu_suspicious+0xf0/0x100 find_task_by_pid_ns+0x5c/0x80 getthread+0x8c/0xb0 gdb_serial_stub+0x9d4/0xd04 kgdb_cpu_enter+0x284/0x7ac kgdb_handle_exception+0x174/0x20c kgdb_brk_fn+0x24/0x30 call_break_hook+0x6c/0x7c brk_handler+0x20/0x5c do_debug_exception+0x1c8/0x22c el1_sync_handler+0x3c/0xe4 el1_sync+0x7c/0x100 rpmh_rsc_probe+0x38/0x420 platform_drv_probe+0x94/0xb4 really_probe+0x134/0x300 driver_probe_device+0x68/0x100 __device_attach_driver+0x90/0xa8 bus_for_each_drv+0x84/0xcc __device_attach+0xb4/0x13c device_initial_probe+0x18/0x20 bus_probe_device+0x38/0x98 device_add+0x38c/0x420 If I understand properly we should just be able to blanket kgdb under one big RCU read lock and the problem should go away. We'll add it to the beast-of-a-function known as kgdb_cpu_enter(). With this I no longer get any splats and things seem to work fine. Signed-off-by: Douglas Anderson <[email protected]> Link: https://lore.kernel.org/r/20200602154729.v2.1.I70e0d4fd46d5ed2aaf0c98a355e8e1b7a5bb7e4e@changeid Signed-off-by: Daniel Thompson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 54505a1 upstream. The commits cd0e00c and 92d7223 broke boot on the Alpha Avanti platform. The patches move memory barriers after a write before the write. The result is that if there's iowrite followed by ioread, there is no barrier between them. The Alpha architecture allows reordering of the accesses to the I/O space, and the missing barrier between write and read causes hang with serial port and real time clock. This patch makes barriers confiorm to the specification. 1. We add mb() before readX_relaxed and writeX_relaxed - memory-barriers.txt claims that these functions must be ordered w.r.t. each other. Alpha doesn't order them, so we need an explicit barrier. 2. We add mb() before reads from the I/O space - so that if there's a write followed by a read, there should be a barrier between them. Signed-off-by: Mikulas Patocka <[email protected]> Fixes: cd0e00c ("alpha: io: reorder barriers to guarantee writeX() and iowriteX() ordering") Fixes: 92d7223 ("alpha: io: reorder barriers to guarantee writeX() and iowriteX() ordering gregkh#2") Cc: [email protected] # v4.17+ Acked-by: Ivan Kokshaysky <[email protected]> Reviewed-by: Maciej W. Rozycki <[email protected]> Signed-off-by: Matt Turner <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit ab8b65b ] It is unsafe to traverse kvm->arch.spapr_tce_tables and stt->iommu_tables without the RCU read lock held. Also, add cond_resched_rcu() in places with the RCU read lock held that could take a while to finish. arch/powerpc/kvm/book3s_64_vio.c:76 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 no locks held by qemu-kvm/4265. stack backtrace: CPU: 96 PID: 4265 Comm: qemu-kvm Not tainted 5.7.0-rc4-next-20200508+ gregkh#2 Call Trace: [c000201a8690f720] [c000000000715948] dump_stack+0xfc/0x174 (unreliable) [c000201a8690f770] [c0000000001d9470] lockdep_rcu_suspicious+0x140/0x164 [c000201a8690f7f0] [c008000010b9fb48] kvm_spapr_tce_release_iommu_group+0x1f0/0x220 [kvm] [c000201a8690f870] [c008000010b8462c] kvm_spapr_tce_release_vfio_group+0x54/0xb0 [kvm] [c000201a8690f8a0] [c008000010b84710] kvm_vfio_destroy+0x88/0x140 [kvm] [c000201a8690f8f0] [c008000010b7d488] kvm_put_kvm+0x370/0x600 [kvm] [c000201a8690f990] [c008000010b7e3c0] kvm_vm_release+0x38/0x60 [kvm] [c000201a8690f9c0] [c0000000005223f4] __fput+0x124/0x330 [c000201a8690fa20] [c000000000151cd8] task_work_run+0xb8/0x130 [c000201a8690fa70] [c0000000001197e8] do_exit+0x4e8/0xfa0 [c000201a8690fb70] [c00000000011a374] do_group_exit+0x64/0xd0 [c000201a8690fbb0] [c000000000132c90] get_signal+0x1f0/0x1200 [c000201a8690fcc0] [c000000000020690] do_notify_resume+0x130/0x3c0 [c000201a8690fda0] [c000000000038d64] syscall_exit_prepare+0x1a4/0x280 [c000201a8690fe20] [c00000000000c8f8] system_call_common+0xf8/0x278 ==== arch/powerpc/kvm/book3s_64_vio.c:368 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by qemu-kvm/4264: #0: c000201ae2d000d8 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0xdc/0x950 [kvm] gregkh#1: c000200c9ed0c468 (&kvm->srcu){....}-{0:0}, at: kvmppc_h_put_tce+0x88/0x340 [kvm] ==== arch/powerpc/kvm/book3s_64_vio.c:108 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by qemu-kvm/4257: #0: c000200b1b363a40 (&kv->lock){+.+.}-{3:3}, at: kvm_vfio_set_attr+0x598/0x6c0 [kvm] ==== arch/powerpc/kvm/book3s_64_vio.c:146 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by qemu-kvm/4257: #0: c000200b1b363a40 (&kv->lock){+.+.}-{3:3}, at: kvm_vfio_set_attr+0x598/0x6c0 [kvm] Signed-off-by: Qian Cai <[email protected]> Signed-off-by: Paul Mackerras <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 027690c ] I made every global per-network-namespace instead. But perhaps doing that to this slab was a step too far. The kmem_cache_create call in our net init method also seems to be responsible for this lockdep warning: [ 45.163710] Unable to find swap-space signature [ 45.375718] trinity-c1 (855): attempted to duplicate a private mapping with mremap. This is not supported. [ 46.055744] futex_wake_op: trinity-c1 tries to shift op by -209; fix this program [ 51.011723] [ 51.013378] ====================================================== [ 51.013875] WARNING: possible circular locking dependency detected [ 51.014378] 5.2.0-rc2 gregkh#1 Not tainted [ 51.014672] ------------------------------------------------------ [ 51.015182] trinity-c2/886 is trying to acquire lock: [ 51.015593] 000000005405f099 (slab_mutex){+.+.}, at: slab_attr_store+0xa2/0x130 [ 51.016190] [ 51.016190] but task is already holding lock: [ 51.016652] 00000000ac662005 (kn->count#43){++++}, at: kernfs_fop_write+0x286/0x500 [ 51.017266] [ 51.017266] which lock already depends on the new lock. [ 51.017266] [ 51.017909] [ 51.017909] the existing dependency chain (in reverse order) is: [ 51.018497] [ 51.018497] -> gregkh#1 (kn->count#43){++++}: [ 51.018956] __lock_acquire+0x7cf/0x1a20 [ 51.019317] lock_acquire+0x17d/0x390 [ 51.019658] __kernfs_remove+0x892/0xae0 [ 51.020020] kernfs_remove_by_name_ns+0x78/0x110 [ 51.020435] sysfs_remove_link+0x55/0xb0 [ 51.020832] sysfs_slab_add+0xc1/0x3e0 [ 51.021332] __kmem_cache_create+0x155/0x200 [ 51.021720] create_cache+0xf5/0x320 [ 51.022054] kmem_cache_create_usercopy+0x179/0x320 [ 51.022486] kmem_cache_create+0x1a/0x30 [ 51.022867] nfsd_reply_cache_init+0x278/0x560 [ 51.023266] nfsd_init_net+0x20f/0x5e0 [ 51.023623] ops_init+0xcb/0x4b0 [ 51.023928] setup_net+0x2fe/0x670 [ 51.024315] copy_net_ns+0x30a/0x3f0 [ 51.024653] create_new_namespaces+0x3c5/0x820 [ 51.025257] unshare_nsproxy_namespaces+0xd1/0x240 [ 51.025881] ksys_unshare+0x506/0x9c0 [ 51.026381] __x64_sys_unshare+0x3a/0x50 [ 51.026937] do_syscall_64+0x110/0x10b0 [ 51.027509] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 51.028175] [ 51.028175] -> #0 (slab_mutex){+.+.}: [ 51.028817] validate_chain+0x1c51/0x2cc0 [ 51.029422] __lock_acquire+0x7cf/0x1a20 [ 51.029947] lock_acquire+0x17d/0x390 [ 51.030438] __mutex_lock+0x100/0xfa0 [ 51.030995] mutex_lock_nested+0x27/0x30 [ 51.031516] slab_attr_store+0xa2/0x130 [ 51.032020] sysfs_kf_write+0x11d/0x180 [ 51.032529] kernfs_fop_write+0x32a/0x500 [ 51.033056] do_loop_readv_writev+0x21d/0x310 [ 51.033627] do_iter_write+0x2e5/0x380 [ 51.034148] vfs_writev+0x170/0x310 [ 51.034616] do_pwritev+0x13e/0x160 [ 51.035100] __x64_sys_pwritev+0xa3/0x110 [ 51.035633] do_syscall_64+0x110/0x10b0 [ 51.036200] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 51.036924] [ 51.036924] other info that might help us debug this: [ 51.036924] [ 51.037876] Possible unsafe locking scenario: [ 51.037876] [ 51.038556] CPU0 CPU1 [ 51.039130] ---- ---- [ 51.039676] lock(kn->count#43); [ 51.040084] lock(slab_mutex); [ 51.040597] lock(kn->count#43); [ 51.041062] lock(slab_mutex); [ 51.041320] [ 51.041320] *** DEADLOCK *** [ 51.041320] [ 51.041793] 3 locks held by trinity-c2/886: [ 51.042128] #0: 000000001f55e152 (sb_writers#5){.+.+}, at: vfs_writev+0x2b9/0x310 [ 51.042739] gregkh#1: 00000000c7d6c034 (&of->mutex){+.+.}, at: kernfs_fop_write+0x25b/0x500 [ 51.043400] gregkh#2: 00000000ac662005 (kn->count#43){++++}, at: kernfs_fop_write+0x286/0x500 Reported-by: kernel test robot <[email protected]> Fixes: 3ba7583 "drc containerization" Signed-off-by: J. Bruce Fields <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 2d3a8e2 ] In blkdev_get() we call __blkdev_get() to do some internal jobs and if there is some errors in __blkdev_get(), the bdput() is called which means we have released the refcount of the bdev (actually the refcount of the bdev inode). This means we cannot access bdev after that point. But acctually bdev is still accessed in blkdev_get() after calling __blkdev_get(). This results in use-after-free if the refcount is the last one we released in __blkdev_get(). Let's take a look at the following scenerio: CPU0 CPU1 CPU2 blkdev_open blkdev_open Remove disk bd_acquire blkdev_get __blkdev_get del_gendisk bdev_unhash_inode bd_acquire bdev_get_gendisk bd_forget failed because of unhashed bdput bdput (the last one) bdev_evict_inode access bdev => use after free [ 459.350216] BUG: KASAN: use-after-free in __lock_acquire+0x24c1/0x31b0 [ 459.351190] Read of size 8 at addr ffff88806c815a80 by task syz-executor.0/20132 [ 459.352347] [ 459.352594] CPU: 0 PID: 20132 Comm: syz-executor.0 Not tainted 4.19.90 gregkh#2 [ 459.353628] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 459.354947] Call Trace: [ 459.355337] dump_stack+0x111/0x19e [ 459.355879] ? __lock_acquire+0x24c1/0x31b0 [ 459.356523] print_address_description+0x60/0x223 [ 459.357248] ? __lock_acquire+0x24c1/0x31b0 [ 459.357887] kasan_report.cold+0xae/0x2d8 [ 459.358503] __lock_acquire+0x24c1/0x31b0 [ 459.359120] ? _raw_spin_unlock_irq+0x24/0x40 [ 459.359784] ? lockdep_hardirqs_on+0x37b/0x580 [ 459.360465] ? _raw_spin_unlock_irq+0x24/0x40 [ 459.361123] ? finish_task_switch+0x125/0x600 [ 459.361812] ? finish_task_switch+0xee/0x600 [ 459.362471] ? mark_held_locks+0xf0/0xf0 [ 459.363108] ? __schedule+0x96f/0x21d0 [ 459.363716] lock_acquire+0x111/0x320 [ 459.364285] ? blkdev_get+0xce/0xbe0 [ 459.364846] ? blkdev_get+0xce/0xbe0 [ 459.365390] __mutex_lock+0xf9/0x12a0 [ 459.365948] ? blkdev_get+0xce/0xbe0 [ 459.366493] ? bdev_evict_inode+0x1f0/0x1f0 [ 459.367130] ? blkdev_get+0xce/0xbe0 [ 459.367678] ? destroy_inode+0xbc/0x110 [ 459.368261] ? mutex_trylock+0x1a0/0x1a0 [ 459.368867] ? __blkdev_get+0x3e6/0x1280 [ 459.369463] ? bdev_disk_changed+0x1d0/0x1d0 [ 459.370114] ? blkdev_get+0xce/0xbe0 [ 459.370656] blkdev_get+0xce/0xbe0 [ 459.371178] ? find_held_lock+0x2c/0x110 [ 459.371774] ? __blkdev_get+0x1280/0x1280 [ 459.372383] ? lock_downgrade+0x680/0x680 [ 459.373002] ? lock_acquire+0x111/0x320 [ 459.373587] ? bd_acquire+0x21/0x2c0 [ 459.374134] ? do_raw_spin_unlock+0x4f/0x250 [ 459.374780] blkdev_open+0x202/0x290 [ 459.375325] do_dentry_open+0x49e/0x1050 [ 459.375924] ? blkdev_get_by_dev+0x70/0x70 [ 459.376543] ? __x64_sys_fchdir+0x1f0/0x1f0 [ 459.377192] ? inode_permission+0xbe/0x3a0 [ 459.377818] path_openat+0x148c/0x3f50 [ 459.378392] ? kmem_cache_alloc+0xd5/0x280 [ 459.379016] ? entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 459.379802] ? path_lookupat.isra.0+0x900/0x900 [ 459.380489] ? __lock_is_held+0xad/0x140 [ 459.381093] do_filp_open+0x1a1/0x280 [ 459.381654] ? may_open_dev+0xf0/0xf0 [ 459.382214] ? find_held_lock+0x2c/0x110 [ 459.382816] ? lock_downgrade+0x680/0x680 [ 459.383425] ? __lock_is_held+0xad/0x140 [ 459.384024] ? do_raw_spin_unlock+0x4f/0x250 [ 459.384668] ? _raw_spin_unlock+0x1f/0x30 [ 459.385280] ? __alloc_fd+0x448/0x560 [ 459.385841] do_sys_open+0x3c3/0x500 [ 459.386386] ? filp_open+0x70/0x70 [ 459.386911] ? trace_hardirqs_on_thunk+0x1a/0x1c [ 459.387610] ? trace_hardirqs_off_caller+0x55/0x1c0 [ 459.388342] ? do_syscall_64+0x1a/0x520 [ 459.388930] do_syscall_64+0xc3/0x520 [ 459.389490] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 459.390248] RIP: 0033:0x416211 [ 459.390720] Code: 75 14 b8 02 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 04 19 00 00 c3 48 83 ec 08 e8 0a fa ff ff 48 89 04 24 b8 02 00 00 00 0f 05 <48> 8b 3c 24 48 89 c2 e8 53 fa ff ff 48 89 d0 48 83 c4 08 48 3d 01 [ 459.393483] RSP: 002b:00007fe45dfe9a60 EFLAGS: 00000293 ORIG_RAX: 0000000000000002 [ 459.394610] RAX: ffffffffffffffda RBX: 00007fe45dfea6d4 RCX: 0000000000416211 [ 459.395678] RDX: 00007fe45dfe9b0a RSI: 0000000000000002 RDI: 00007fe45dfe9b00 [ 459.396758] RBP: 000000000076bf20 R08: 0000000000000000 R09: 000000000000000a [ 459.397930] R10: 0000000000000075 R11: 0000000000000293 R12: 00000000ffffffff [ 459.399022] R13: 0000000000000bd9 R14: 00000000004cdb80 R15: 000000000076bf2c [ 459.400168] [ 459.400430] Allocated by task 20132: [ 459.401038] kasan_kmalloc+0xbf/0xe0 [ 459.401652] kmem_cache_alloc+0xd5/0x280 [ 459.402330] bdev_alloc_inode+0x18/0x40 [ 459.402970] alloc_inode+0x5f/0x180 [ 459.403510] iget5_locked+0x57/0xd0 [ 459.404095] bdget+0x94/0x4e0 [ 459.404607] bd_acquire+0xfa/0x2c0 [ 459.405113] blkdev_open+0x110/0x290 [ 459.405702] do_dentry_open+0x49e/0x1050 [ 459.406340] path_openat+0x148c/0x3f50 [ 459.406926] do_filp_open+0x1a1/0x280 [ 459.407471] do_sys_open+0x3c3/0x500 [ 459.408010] do_syscall_64+0xc3/0x520 [ 459.408572] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 459.409415] [ 459.409679] Freed by task 1262: [ 459.410212] __kasan_slab_free+0x129/0x170 [ 459.410919] kmem_cache_free+0xb2/0x2a0 [ 459.411564] rcu_process_callbacks+0xbb2/0x2320 [ 459.412318] __do_softirq+0x225/0x8ac Fix this by delaying bdput() to the end of blkdev_get() which means we have finished accessing bdev. Fixes: 77ea887 ("implement in-kernel gendisk events handling") Reported-by: Hulk Robot <[email protected]> Signed-off-by: Jason Yan <[email protected]> Tested-by: Sedat Dilek <[email protected]> Reviewed-by: Jan Kara <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Dan Carpenter <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Jens Axboe <[email protected]> Cc: Ming Lei <[email protected]> Cc: Jan Kara <[email protected]> Cc: Dan Carpenter <[email protected]> Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit e5a15e1 upstream. The following kernel panic was captured when running nfs server over ocfs2, at that time ocfs2_test_inode_bit() was checking whether one inode locating at "blkno" 5 was valid, that is ocfs2 root inode, its "suballoc_slot" was OCFS2_INVALID_SLOT(65535) and it was allocted from //global_inode_alloc, but here it wrongly assumed that it was got from per slot inode alloctor which would cause array overflow and trigger kernel panic. BUG: unable to handle kernel paging request at 0000000000001088 IP: [<ffffffff816f6898>] _raw_spin_lock+0x18/0xf0 PGD 1e06ba067 PUD 1e9e7d067 PMD 0 Oops: 0002 [gregkh#1] SMP CPU: 6 PID: 24873 Comm: nfsd Not tainted 4.1.12-124.36.1.el6uek.x86_64 gregkh#2 Hardware name: Huawei CH121 V3/IT11SGCA1, BIOS 3.87 02/02/2018 RIP: _raw_spin_lock+0x18/0xf0 RSP: e02b:ffff88005ae97908 EFLAGS: 00010206 RAX: ffff88005ae98000 RBX: 0000000000001088 RCX: 0000000000000000 RDX: 0000000000020000 RSI: 0000000000000009 RDI: 0000000000001088 RBP: ffff88005ae97928 R08: 0000000000000000 R09: ffff880212878e00 R10: 0000000000007ff0 R11: 0000000000000000 R12: 0000000000001088 R13: ffff8800063c0aa8 R14: ffff8800650c27d0 R15: 000000000000ffff FS: 0000000000000000(0000) GS:ffff880218180000(0000) knlGS:ffff880218180000 CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000001088 CR3: 00000002033d0000 CR4: 0000000000042660 Call Trace: igrab+0x1e/0x60 ocfs2_get_system_file_inode+0x63/0x3a0 [ocfs2] ocfs2_test_inode_bit+0x328/0xa00 [ocfs2] ocfs2_get_parent+0xba/0x3e0 [ocfs2] reconnect_path+0xb5/0x300 exportfs_decode_fh+0xf6/0x2b0 fh_verify+0x350/0x660 [nfsd] nfsd4_putfh+0x4d/0x60 [nfsd] nfsd4_proc_compound+0x3d3/0x6f0 [nfsd] nfsd_dispatch+0xe0/0x290 [nfsd] svc_process_common+0x412/0x6a0 [sunrpc] svc_process+0x123/0x210 [sunrpc] nfsd+0xff/0x170 [nfsd] kthread+0xcb/0xf0 ret_from_fork+0x61/0x90 Code: 83 c2 02 0f b7 f2 e8 18 dc 91 ff 66 90 eb bf 0f 1f 40 00 55 48 89 e5 41 56 41 55 41 54 53 0f 1f 44 00 00 48 89 fb ba 00 00 02 00 <f0> 0f c1 17 89 d0 45 31 e4 45 31 ed c1 e8 10 66 39 d0 41 89 c6 RIP _raw_spin_lock+0x18/0xf0 CR2: 0000000000001088 ---[ end trace 7264463cd1aac8f9 ]--- Kernel panic - not syncing: Fatal exception Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Junxiao Bi <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Joel Becker <[email protected]> Cc: Jun Piao <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 440ab9e ] At times when I'm using kgdb I see a splat on my console about suspicious RCU usage. I managed to come up with a case that could reproduce this that looked like this: WARNING: suspicious RCU usage 5.7.0-rc4+ #609 Not tainted ----------------------------- kernel/pid.c:395 find_task_by_pid_ns() needs rcu_read_lock() protection! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 3 locks held by swapper/0/1: #0: ffffff81b6b8e988 (&dev->mutex){....}-{3:3}, at: __device_attach+0x40/0x13c gregkh#1: ffffffd01109e9e8 (dbg_master_lock){....}-{2:2}, at: kgdb_cpu_enter+0x20c/0x7ac gregkh#2: ffffffd01109ea90 (dbg_slave_lock){....}-{2:2}, at: kgdb_cpu_enter+0x3ec/0x7ac stack backtrace: CPU: 7 PID: 1 Comm: swapper/0 Not tainted 5.7.0-rc4+ #609 Hardware name: Google Cheza (rev3+) (DT) Call trace: dump_backtrace+0x0/0x1b8 show_stack+0x1c/0x24 dump_stack+0xd4/0x134 lockdep_rcu_suspicious+0xf0/0x100 find_task_by_pid_ns+0x5c/0x80 getthread+0x8c/0xb0 gdb_serial_stub+0x9d4/0xd04 kgdb_cpu_enter+0x284/0x7ac kgdb_handle_exception+0x174/0x20c kgdb_brk_fn+0x24/0x30 call_break_hook+0x6c/0x7c brk_handler+0x20/0x5c do_debug_exception+0x1c8/0x22c el1_sync_handler+0x3c/0xe4 el1_sync+0x7c/0x100 rpmh_rsc_probe+0x38/0x420 platform_drv_probe+0x94/0xb4 really_probe+0x134/0x300 driver_probe_device+0x68/0x100 __device_attach_driver+0x90/0xa8 bus_for_each_drv+0x84/0xcc __device_attach+0xb4/0x13c device_initial_probe+0x18/0x20 bus_probe_device+0x38/0x98 device_add+0x38c/0x420 If I understand properly we should just be able to blanket kgdb under one big RCU read lock and the problem should go away. We'll add it to the beast-of-a-function known as kgdb_cpu_enter(). With this I no longer get any splats and things seem to work fine. Signed-off-by: Douglas Anderson <[email protected]> Link: https://lore.kernel.org/r/20200602154729.v2.1.I70e0d4fd46d5ed2aaf0c98a355e8e1b7a5bb7e4e@changeid Signed-off-by: Daniel Thompson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit cb551b8 ] In BRM_status_show(), if the condition "!ioc->is_warpdrive" tested on entry to the function is true, a "goto out" is called. This results in unlocking ioc->pci_access_mutex without this mutex lock being taken. This generates the following splat: [ 1148.539883] mpt3sas_cm2: BRM_status_show: BRM attribute is only for warpdrive [ 1148.547184] [ 1148.548708] ===================================== [ 1148.553501] WARNING: bad unlock balance detected! [ 1148.558277] 5.8.0-rc3+ #827 Not tainted [ 1148.562183] ------------------------------------- [ 1148.566959] cat/5008 is trying to release lock (&ioc->pci_access_mutex) at: [ 1148.574035] [<ffffffffc070b7a3>] BRM_status_show+0xd3/0x100 [mpt3sas] [ 1148.580574] but there are no more locks to release! [ 1148.585524] [ 1148.585524] other info that might help us debug this: [ 1148.599624] 3 locks held by cat/5008: [ 1148.607085] #0: ffff92aea3e392c0 (&p->lock){+.+.}-{3:3}, at: seq_read+0x34/0x480 [ 1148.618509] gregkh#1: ffff922ef14c4888 (&of->mutex){+.+.}-{3:3}, at: kernfs_seq_start+0x2a/0xb0 [ 1148.630729] gregkh#2: ffff92aedb5d7310 (kn->active#224){.+.+}-{0:0}, at: kernfs_seq_start+0x32/0xb0 [ 1148.643347] [ 1148.643347] stack backtrace: [ 1148.655259] CPU: 73 PID: 5008 Comm: cat Not tainted 5.8.0-rc3+ #827 [ 1148.665309] Hardware name: HGST H4060-S/S2600STB, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [ 1148.678394] Call Trace: [ 1148.684750] dump_stack+0x78/0xa0 [ 1148.691802] lock_release.cold+0x45/0x4a [ 1148.699451] __mutex_unlock_slowpath+0x35/0x270 [ 1148.707675] BRM_status_show+0xd3/0x100 [mpt3sas] [ 1148.716092] dev_attr_show+0x19/0x40 [ 1148.723664] sysfs_kf_seq_show+0x87/0x100 [ 1148.731193] seq_read+0xbc/0x480 [ 1148.737882] vfs_read+0xa0/0x160 [ 1148.744514] ksys_read+0x58/0xd0 [ 1148.751129] do_syscall_64+0x4c/0xa0 [ 1148.757941] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 1148.766240] RIP: 0033:0x7f1230566542 [ 1148.772957] Code: Bad RIP value. [ 1148.779206] RSP: 002b:00007ffeac1bcac8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 1148.790063] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f1230566542 [ 1148.800284] RDX: 0000000000020000 RSI: 00007f1223460000 RDI: 0000000000000003 [ 1148.810474] RBP: 00007f1223460000 R08: 00007f122345f010 R09: 0000000000000000 [ 1148.820641] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000000000 [ 1148.830728] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000 Fix this by returning immediately instead of jumping to the out label. Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Johannes Thumshirn <[email protected]> Acked-by: Sreekanth Reddy <[email protected]> Signed-off-by: Damien Le Moal <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit cb551b8 ] In BRM_status_show(), if the condition "!ioc->is_warpdrive" tested on entry to the function is true, a "goto out" is called. This results in unlocking ioc->pci_access_mutex without this mutex lock being taken. This generates the following splat: [ 1148.539883] mpt3sas_cm2: BRM_status_show: BRM attribute is only for warpdrive [ 1148.547184] [ 1148.548708] ===================================== [ 1148.553501] WARNING: bad unlock balance detected! [ 1148.558277] 5.8.0-rc3+ #827 Not tainted [ 1148.562183] ------------------------------------- [ 1148.566959] cat/5008 is trying to release lock (&ioc->pci_access_mutex) at: [ 1148.574035] [<ffffffffc070b7a3>] BRM_status_show+0xd3/0x100 [mpt3sas] [ 1148.580574] but there are no more locks to release! [ 1148.585524] [ 1148.585524] other info that might help us debug this: [ 1148.599624] 3 locks held by cat/5008: [ 1148.607085] #0: ffff92aea3e392c0 (&p->lock){+.+.}-{3:3}, at: seq_read+0x34/0x480 [ 1148.618509] #1: ffff922ef14c4888 (&of->mutex){+.+.}-{3:3}, at: kernfs_seq_start+0x2a/0xb0 [ 1148.630729] #2: ffff92aedb5d7310 (kn->active#224){.+.+}-{0:0}, at: kernfs_seq_start+0x32/0xb0 [ 1148.643347] [ 1148.643347] stack backtrace: [ 1148.655259] CPU: 73 PID: 5008 Comm: cat Not tainted 5.8.0-rc3+ #827 [ 1148.665309] Hardware name: HGST H4060-S/S2600STB, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [ 1148.678394] Call Trace: [ 1148.684750] dump_stack+0x78/0xa0 [ 1148.691802] lock_release.cold+0x45/0x4a [ 1148.699451] __mutex_unlock_slowpath+0x35/0x270 [ 1148.707675] BRM_status_show+0xd3/0x100 [mpt3sas] [ 1148.716092] dev_attr_show+0x19/0x40 [ 1148.723664] sysfs_kf_seq_show+0x87/0x100 [ 1148.731193] seq_read+0xbc/0x480 [ 1148.737882] vfs_read+0xa0/0x160 [ 1148.744514] ksys_read+0x58/0xd0 [ 1148.751129] do_syscall_64+0x4c/0xa0 [ 1148.757941] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 1148.766240] RIP: 0033:0x7f1230566542 [ 1148.772957] Code: Bad RIP value. [ 1148.779206] RSP: 002b:00007ffeac1bcac8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 1148.790063] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f1230566542 [ 1148.800284] RDX: 0000000000020000 RSI: 00007f1223460000 RDI: 0000000000000003 [ 1148.810474] RBP: 00007f1223460000 R08: 00007f122345f010 R09: 0000000000000000 [ 1148.820641] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000000000 [ 1148.830728] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000 Fix this by returning immediately instead of jumping to the out label. Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Johannes Thumshirn <[email protected]> Acked-by: Sreekanth Reddy <[email protected]> Signed-off-by: Damien Le Moal <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

Ido Schimmel says: ==================== mlxsw fixes This patch set contains various fixes for mlxsw. Patches gregkh#1-gregkh#2 fix two trap related issues introduced in previous cycle. Patches gregkh#3-gregkh#5 fix rare use-after-frees discovered by syzkaller. After over a week of fuzzing with the fixes, the bugs did not reproduce. Patch gregkh#6 from Amit fixes an issue in the ethtool selftest that was recently discovered after running the test on a new platform that supports only 1Gbps and 10Gbps speeds. ==================== Signed-off-by: David S. Miller <[email protected]>

This patch fixes a race condition that causes a use-after-free during amdgpu_dm_atomic_commit_tail. This can occur when 2 non-blocking commits are requested and the second one finishes before the first. Essentially, this bug occurs when the following sequence of events happens: 1. Non-blocking commit gregkh#1 is requested w/ a new dm_state gregkh#1 and is deferred to the workqueue. 2. Non-blocking commit gregkh#2 is requested w/ a new dm_state gregkh#2 and is deferred to the workqueue. 3. Commit gregkh#2 starts before commit gregkh#1, dm_state gregkh#1 is used in the commit_tail and commit gregkh#2 completes, freeing dm_state gregkh#1. 4. Commit gregkh#1 starts after commit gregkh#2 completes, uses the freed dm_state 1 and dereferences a freelist pointer while setting the context. Since this bug has only been spotted with fast commits, this patch fixes the bug by clearing the dm_state instead of using the old dc_state for fast updates. In addition, since dm_state is only used for its dc_state and amdgpu_dm_atomic_commit_tail will retain the dc_state if none is found, removing the dm_state should not have any consequences in fast updates. This use-after-free bug has existed for a while now, but only caused a noticeable issue starting from 5.7-rc1 due to 3202fa6 ("slub: relocate freelist pointer to middle of object") moving the freelist pointer from dm_state->base (which was unused) to dm_state->context (which is dereferenced). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=207383 Fixes: bd200d1 ("drm/amd/display: Don't replace the dc_state for fast updates") Reported-by: Duncan <[email protected]> Signed-off-by: Mazin Rezk <[email protected]> Reviewed-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]

I compiled with AddressSanitizer and I had these memory leaks while I was using the tep_parse_format function: Direct leak of 28 byte(s) in 4 object(s) allocated from: #0 0x7fb07db49ffe in __interceptor_realloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10dffe) gregkh#1 0x7fb07a724228 in extend_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:985 gregkh#2 0x7fb07a724c21 in __read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1140 gregkh#3 0x7fb07a724f78 in read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1206 gregkh#4 0x7fb07a725191 in __read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1291 gregkh#5 0x7fb07a7251df in read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1299 gregkh#6 0x7fb07a72e6c8 in process_dynamic_array_len /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:2849 gregkh#7 0x7fb07a7304b8 in process_function /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3161 gregkh#8 0x7fb07a730900 in process_arg_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3207 gregkh#9 0x7fb07a727c0b in process_arg /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1786 gregkh#10 0x7fb07a731080 in event_read_print_args /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3285 gregkh#11 0x7fb07a731722 in event_read_print /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3369 gregkh#12 0x7fb07a740054 in __tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6335 gregkh#13 0x7fb07a74047a in __parse_event /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6389 gregkh#14 0x7fb07a740536 in tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6431 gregkh#15 0x7fb07a785acf in parse_event ../../../src/fs-src/fs.c:251 gregkh#16 0x7fb07a785ccd in parse_systems ../../../src/fs-src/fs.c:284 gregkh#17 0x7fb07a786fb3 in read_metadata ../../../src/fs-src/fs.c:593 gregkh#18 0x7fb07a78760e in ftrace_fs_source_init ../../../src/fs-src/fs.c:727 gregkh#19 0x7fb07d90c19c in add_component_with_init_method_data ../../../../src/lib/graph/graph.c:1048 gregkh#20 0x7fb07d90c87b in add_source_component_with_initialize_method_data ../../../../src/lib/graph/graph.c:1127 gregkh#21 0x7fb07d90c92a in bt_graph_add_source_component ../../../../src/lib/graph/graph.c:1152 #22 0x55db11aa632e in cmd_run_ctx_create_components_from_config_components ../../../src/cli/babeltrace2.c:2252 #23 0x55db11aa6fda in cmd_run_ctx_create_components ../../../src/cli/babeltrace2.c:2347 #24 0x55db11aa780c in cmd_run ../../../src/cli/babeltrace2.c:2461 #25 0x55db11aa8a7d in main ../../../src/cli/babeltrace2.c:2673 #26 0x7fb07d5460b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2) The token variable in the process_dynamic_array_len function is allocated in the read_expect_type function, but is not freed before calling the read_token function. Free the token variable before calling read_token in order to plug the leak. Signed-off-by: Philippe Duplessis-Guindon <[email protected]> Reviewed-by: Steven Rostedt (VMware) <[email protected]> Link: https://lore.kernel.org/linux-trace-devel/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

GFP_KERNEL flag specifies a normal kernel allocation in which executing in process context without any locks and can sleep. mmio_diff takes sometime to finish all the diff compare and it has locks, continue using GFP_KERNEL will output below trace if LOCKDEP enabled. Use GFP_ATOMIC instead. V2: Rebase. ===================================================== WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected 5.7.0-rc2 #400 Not tainted ----------------------------------------------------- is trying to acquire: ffffffffb47bea20 (fs_reclaim){+.+.}-{0:0}, at: fs_reclaim_acquire.part.0+0x0/0x30 and this task is already holding: ffff88845b85cc90 (&gvt->scheduler.mmio_context_lock){+.-.}-{2:2}, at: vgpu_mmio_diff_show+0xcf/0x2e0 which would create a new lock dependency: (&gvt->scheduler.mmio_context_lock){+.-.}-{2:2} -> (fs_reclaim){+.+.}-{0:0} but this new dependency connects a SOFTIRQ-irq-safe lock: (&gvt->scheduler.mmio_context_lock){+.-.}-{2:2} ... which became SOFTIRQ-irq-safe at: lock_acquire+0x175/0x4e0 _raw_spin_lock_irqsave+0x2b/0x40 shadow_context_status_change+0xfe/0x2f0 notifier_call_chain+0x6a/0xa0 __atomic_notifier_call_chain+0x5f/0xf0 execlists_schedule_out+0x42a/0x820 process_csb+0xe7/0x3e0 execlists_submission_tasklet+0x5c/0x1d0 tasklet_action_common.isra.0+0xeb/0x260 __do_softirq+0x11d/0x56f irq_exit+0xf6/0x100 do_IRQ+0x7f/0x160 ret_from_intr+0x0/0x2a cpuidle_enter_state+0xcd/0x5b0 cpuidle_enter+0x37/0x60 do_idle+0x337/0x3f0 cpu_startup_entry+0x14/0x20 start_kernel+0x58b/0x5c5 secondary_startup_64+0xa4/0xb0 to a SOFTIRQ-irq-unsafe lock: (fs_reclaim){+.+.}-{0:0} ... which became SOFTIRQ-irq-unsafe at: ... lock_acquire+0x175/0x4e0 fs_reclaim_acquire.part.0+0x20/0x30 kmem_cache_alloc_node_trace+0x2e/0x290 alloc_worker+0x2b/0xb0 init_rescuer.part.0+0x17/0xe0 workqueue_init+0x293/0x3bb kernel_init_freeable+0x149/0x325 kernel_init+0x8/0x116 ret_from_fork+0x3a/0x50 other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); local_irq_disable(); lock(&gvt->scheduler.mmio_context_lock); lock(fs_reclaim); <Interrupt> lock(&gvt->scheduler.mmio_context_lock); *** DEADLOCK *** 3 locks held by cat/1439: #0: ffff888444a23698 (&p->lock){+.+.}-{3:3}, at: seq_read+0x49/0x680 gregkh#1: ffff88845b858068 (&gvt->lock){+.+.}-{3:3}, at: vgpu_mmio_diff_show+0xc7/0x2e0 gregkh#2: ffff88845b85cc90 (&gvt->scheduler.mmio_context_lock){+.-.}-{2:2}, at: vgpu_mmio_diff_show+0xcf/0x2e0 the dependencies between SOFTIRQ-irq-safe lock and the holding lock: -> (&gvt->scheduler.mmio_context_lock){+.-.}-{2:2} ops: 31 { HARDIRQ-ON-W at: lock_acquire+0x175/0x4e0 _raw_spin_lock_bh+0x2f/0x40 vgpu_mmio_diff_show+0xcf/0x2e0 seq_read+0x242/0x680 full_proxy_read+0x95/0xc0 vfs_read+0xc2/0x1b0 ksys_read+0xc4/0x160 do_syscall_64+0x63/0x290 entry_SYSCALL_64_after_hwframe+0x49/0xb3 IN-SOFTIRQ-W at: lock_acquire+0x175/0x4e0 _raw_spin_lock_irqsave+0x2b/0x40 shadow_context_status_change+0xfe/0x2f0 notifier_call_chain+0x6a/0xa0 __atomic_notifier_call_chain+0x5f/0xf0 execlists_schedule_out+0x42a/0x820 process_csb+0xe7/0x3e0 execlists_submission_tasklet+0x5c/0x1d0 tasklet_action_common.isra.0+0xeb/0x260 __do_softirq+0x11d/0x56f irq_exit+0xf6/0x100 do_IRQ+0x7f/0x160 ret_from_intr+0x0/0x2a cpuidle_enter_state+0xcd/0x5b0 cpuidle_enter+0x37/0x60 do_idle+0x337/0x3f0 cpu_startup_entry+0x14/0x20 start_kernel+0x58b/0x5c5 secondary_startup_64+0xa4/0xb0 INITIAL USE at: lock_acquire+0x175/0x4e0 _raw_spin_lock_irqsave+0x2b/0x40 shadow_context_status_change+0xfe/0x2f0 notifier_call_chain+0x6a/0xa0 __atomic_notifier_call_chain+0x5f/0xf0 execlists_schedule_in+0x2c8/0x690 __execlists_submission_tasklet+0x1303/0x1930 execlists_submit_request+0x1e7/0x230 submit_notify+0x105/0x2a4 __i915_sw_fence_complete+0xaa/0x380 __engine_park+0x313/0x5a0 ____intel_wakeref_put_last+0x3e/0x90 intel_gt_resume+0x41e/0x440 intel_gt_init+0x283/0xbc0 i915_gem_init+0x197/0x240 i915_driver_probe+0xc2d/0x12e0 i915_pci_probe+0xa2/0x1e0 local_pci_probe+0x6f/0xb0 pci_device_probe+0x171/0x230 really_probe+0x17a/0x380 driver_probe_device+0x70/0xf0 device_driver_attach+0x82/0x90 __driver_attach+0x60/0x100 bus_for_each_dev+0xe4/0x140 bus_add_driver+0x257/0x2a0 driver_register+0xd3/0x150 i915_init+0x6d/0x80 do_one_initcall+0xb8/0x3a0 kernel_init_freeable+0x2b4/0x325 kernel_init+0x8/0x116 ret_from_fork+0x3a/0x50 } __key.77812+0x0/0x40 ... acquired at: lock_acquire+0x175/0x4e0 fs_reclaim_acquire.part.0+0x20/0x30 kmem_cache_alloc_trace+0x2e/0x260 mmio_diff_handler+0xc0/0x150 intel_gvt_for_each_tracked_mmio+0x7b/0x140 vgpu_mmio_diff_show+0x111/0x2e0 seq_read+0x242/0x680 full_proxy_read+0x95/0xc0 vfs_read+0xc2/0x1b0 ksys_read+0xc4/0x160 do_syscall_64+0x63/0x290 entry_SYSCALL_64_after_hwframe+0x49/0xb3 the dependencies between the lock to be acquired and SOFTIRQ-irq-unsafe lock: -> (fs_reclaim){+.+.}-{0:0} ops: 1999031 { HARDIRQ-ON-W at: lock_acquire+0x175/0x4e0 fs_reclaim_acquire.part.0+0x20/0x30 kmem_cache_alloc_node_trace+0x2e/0x290 alloc_worker+0x2b/0xb0 init_rescuer.part.0+0x17/0xe0 workqueue_init+0x293/0x3bb kernel_init_freeable+0x149/0x325 kernel_init+0x8/0x116 ret_from_fork+0x3a/0x50 SOFTIRQ-ON-W at: lock_acquire+0x175/0x4e0 fs_reclaim_acquire.part.0+0x20/0x30 kmem_cache_alloc_node_trace+0x2e/0x290 alloc_worker+0x2b/0xb0 init_rescuer.part.0+0x17/0xe0 workqueue_init+0x293/0x3bb kernel_init_freeable+0x149/0x325 kernel_init+0x8/0x116 ret_from_fork+0x3a/0x50 INITIAL USE at: lock_acquire+0x175/0x4e0 fs_reclaim_acquire.part.0+0x20/0x30 kmem_cache_alloc_node_trace+0x2e/0x290 alloc_worker+0x2b/0xb0 init_rescuer.part.0+0x17/0xe0 workqueue_init+0x293/0x3bb kernel_init_freeable+0x149/0x325 kernel_init+0x8/0x116 ret_from_fork+0x3a/0x50 } __fs_reclaim_map+0x0/0x60 ... acquired at: lock_acquire+0x175/0x4e0 fs_reclaim_acquire.part.0+0x20/0x30 kmem_cache_alloc_trace+0x2e/0x260 mmio_diff_handler+0xc0/0x150 intel_gvt_for_each_tracked_mmio+0x7b/0x140 vgpu_mmio_diff_show+0x111/0x2e0 seq_read+0x242/0x680 full_proxy_read+0x95/0xc0 vfs_read+0xc2/0x1b0 ksys_read+0xc4/0x160 do_syscall_64+0x63/0x290 entry_SYSCALL_64_after_hwframe+0x49/0xb3 stack backtrace: CPU: 5 PID: 1439 Comm: cat Not tainted 5.7.0-rc2 #400 Hardware name: Intel(R) Client Systems NUC8i7BEH/NUC8BEB, BIOS BECFL357.86A.0056.2018.1128.1717 11/28/2018 Call Trace: dump_stack+0x97/0xe0 check_irq_usage.cold+0x428/0x434 ? check_usage_forwards+0x2c0/0x2c0 ? class_equal+0x11/0x20 ? __bfs+0xd2/0x2d0 ? in_any_class_list+0xa0/0xa0 ? check_path+0x22/0x40 ? check_noncircular+0x150/0x2b0 ? print_circular_bug.isra.0+0x1b0/0x1b0 ? mark_lock+0x13d/0xc50 ? __lock_acquire+0x1e32/0x39b0 __lock_acquire+0x1e32/0x39b0 ? timerqueue_add+0xc1/0x130 ? register_lock_class+0xa60/0xa60 ? mark_lock+0x13d/0xc50 lock_acquire+0x175/0x4e0 ? __zone_pcp_update+0x80/0x80 ? check_flags.part.0+0x210/0x210 ? mark_held_locks+0x65/0x90 ? _raw_spin_unlock_irqrestore+0x32/0x40 ? lockdep_hardirqs_on+0x190/0x290 ? fwtable_read32+0x163/0x480 ? mmio_diff_handler+0xc0/0x150 fs_reclaim_acquire.part.0+0x20/0x30 ? __zone_pcp_update+0x80/0x80 kmem_cache_alloc_trace+0x2e/0x260 mmio_diff_handler+0xc0/0x150 ? vgpu_mmio_diff_open+0x30/0x30 intel_gvt_for_each_tracked_mmio+0x7b/0x140 vgpu_mmio_diff_show+0x111/0x2e0 ? mmio_diff_handler+0x150/0x150 ? rcu_read_lock_sched_held+0xa0/0xb0 ? rcu_read_lock_bh_held+0xc0/0xc0 ? kasan_unpoison_shadow+0x33/0x40 ? __kasan_kmalloc.constprop.0+0xc2/0xd0 seq_read+0x242/0x680 ? debugfs_locked_down.isra.0+0x70/0x70 full_proxy_read+0x95/0xc0 vfs_read+0xc2/0x1b0 ksys_read+0xc4/0x160 ? kernel_write+0xb0/0xb0 ? mark_held_locks+0x24/0x90 do_syscall_64+0x63/0x290 entry_SYSCALL_64_after_hwframe+0x49/0xb3 RIP: 0033:0x7ffbe3e6efb2 Code: c0 e9 c2 fe ff ff 50 48 8d 3d ca cb 0a 00 e8 f5 19 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 RSP: 002b:00007ffd021c08a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007ffbe3e6efb2 RDX: 0000000000020000 RSI: 00007ffbe34cd000 RDI: 0000000000000003 RBP: 00007ffbe34cd000 R08: 00007ffbe34cc010 R09: 0000000000000000 R10: 0000000000000022 R11: 0000000000000246 R12: 0000562b6f0a11f0 R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000 ------------[ cut here ]------------ Acked-by: Zhenyu Wang <[email protected]> Signed-off-by: Colin Xu <[email protected]> Signed-off-by: Zhenyu Wang <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]

commit fde9f39 upstream. This patch fixes a race condition that causes a use-after-free during amdgpu_dm_atomic_commit_tail. This can occur when 2 non-blocking commits are requested and the second one finishes before the first. Essentially, this bug occurs when the following sequence of events happens: 1. Non-blocking commit gregkh#1 is requested w/ a new dm_state gregkh#1 and is deferred to the workqueue. 2. Non-blocking commit gregkh#2 is requested w/ a new dm_state gregkh#2 and is deferred to the workqueue. 3. Commit gregkh#2 starts before commit gregkh#1, dm_state gregkh#1 is used in the commit_tail and commit gregkh#2 completes, freeing dm_state gregkh#1. 4. Commit gregkh#1 starts after commit gregkh#2 completes, uses the freed dm_state 1 and dereferences a freelist pointer while setting the context. Since this bug has only been spotted with fast commits, this patch fixes the bug by clearing the dm_state instead of using the old dc_state for fast updates. In addition, since dm_state is only used for its dc_state and amdgpu_dm_atomic_commit_tail will retain the dc_state if none is found, removing the dm_state should not have any consequences in fast updates. This use-after-free bug has existed for a while now, but only caused a noticeable issue starting from 5.7-rc1 due to 3202fa6 ("slub: relocate freelist pointer to middle of object") moving the freelist pointer from dm_state->base (which was unused) to dm_state->context (which is dereferenced). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=207383 Fixes: bd200d1 ("drm/amd/display: Don't replace the dc_state for fast updates") Reported-by: Duncan <[email protected]> Signed-off-by: Mazin Rezk <[email protected]> Reviewed-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit fde9f39 upstream. This patch fixes a race condition that causes a use-after-free during amdgpu_dm_atomic_commit_tail. This can occur when 2 non-blocking commits are requested and the second one finishes before the first. Essentially, this bug occurs when the following sequence of events happens: 1. Non-blocking commit #1 is requested w/ a new dm_state #1 and is deferred to the workqueue. 2. Non-blocking commit #2 is requested w/ a new dm_state #2 and is deferred to the workqueue. 3. Commit #2 starts before commit #1, dm_state #1 is used in the commit_tail and commit #2 completes, freeing dm_state #1. 4. Commit #1 starts after commit #2 completes, uses the freed dm_state 1 and dereferences a freelist pointer while setting the context. Since this bug has only been spotted with fast commits, this patch fixes the bug by clearing the dm_state instead of using the old dc_state for fast updates. In addition, since dm_state is only used for its dc_state and amdgpu_dm_atomic_commit_tail will retain the dc_state if none is found, removing the dm_state should not have any consequences in fast updates. This use-after-free bug has existed for a while now, but only caused a noticeable issue starting from 5.7-rc1 due to 3202fa6 ("slub: relocate freelist pointer to middle of object") moving the freelist pointer from dm_state->base (which was unused) to dm_state->context (which is dereferenced). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=207383 Fixes: bd200d1 ("drm/amd/display: Don't replace the dc_state for fast updates") Reported-by: Duncan <[email protected]> Signed-off-by: Mazin Rezk <[email protected]> Reviewed-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit e24c644 ] I compiled with AddressSanitizer and I had these memory leaks while I was using the tep_parse_format function: Direct leak of 28 byte(s) in 4 object(s) allocated from: #0 0x7fb07db49ffe in __interceptor_realloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10dffe) #1 0x7fb07a724228 in extend_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:985 #2 0x7fb07a724c21 in __read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1140 #3 0x7fb07a724f78 in read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1206 #4 0x7fb07a725191 in __read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1291 #5 0x7fb07a7251df in read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1299 #6 0x7fb07a72e6c8 in process_dynamic_array_len /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:2849 #7 0x7fb07a7304b8 in process_function /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3161 #8 0x7fb07a730900 in process_arg_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3207 #9 0x7fb07a727c0b in process_arg /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1786 #10 0x7fb07a731080 in event_read_print_args /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3285 #11 0x7fb07a731722 in event_read_print /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3369 #12 0x7fb07a740054 in __tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6335 #13 0x7fb07a74047a in __parse_event /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6389 #14 0x7fb07a740536 in tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6431 #15 0x7fb07a785acf in parse_event ../../../src/fs-src/fs.c:251 #16 0x7fb07a785ccd in parse_systems ../../../src/fs-src/fs.c:284 #17 0x7fb07a786fb3 in read_metadata ../../../src/fs-src/fs.c:593 #18 0x7fb07a78760e in ftrace_fs_source_init ../../../src/fs-src/fs.c:727 #19 0x7fb07d90c19c in add_component_with_init_method_data ../../../../src/lib/graph/graph.c:1048 #20 0x7fb07d90c87b in add_source_component_with_initialize_method_data ../../../../src/lib/graph/graph.c:1127 #21 0x7fb07d90c92a in bt_graph_add_source_component ../../../../src/lib/graph/graph.c:1152 #22 0x55db11aa632e in cmd_run_ctx_create_components_from_config_components ../../../src/cli/babeltrace2.c:2252 #23 0x55db11aa6fda in cmd_run_ctx_create_components ../../../src/cli/babeltrace2.c:2347 #24 0x55db11aa780c in cmd_run ../../../src/cli/babeltrace2.c:2461 #25 0x55db11aa8a7d in main ../../../src/cli/babeltrace2.c:2673 #26 0x7fb07d5460b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2) The token variable in the process_dynamic_array_len function is allocated in the read_expect_type function, but is not freed before calling the read_token function. Free the token variable before calling read_token in order to plug the leak. Signed-off-by: Philippe Duplessis-Guindon <[email protected]> Reviewed-by: Steven Rostedt (VMware) <[email protected]> Link: https://lore.kernel.org/linux-trace-devel/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 36670b6 ] During beacon miss handling, ath12k driver iterates over active virtual interfaces (vifs) and attempts to access the radio object (ar) via arvif->deflink->ar. However, after commit aa80f12 ("wifi: ath12k: defer vdev creation for MLO"), arvif is linked to a radio only after vdev creation, typically when a channel is assigned or a scan is requested. For P2P capable devices, a default P2P interface is created by wpa_supplicant along with regular station interfaces, these serve as dummy interfaces for P2P-capable stations, lack an associated netdev and initiate frequent scans to discover neighbor p2p devices. When a scan is initiated on such P2P vifs, driver selects destination radio (ar) based on scan frequency, creates a scan vdev, and attaches arvif to the radio. Once the scan completes or is aborted, the scan vdev is deleted, detaching arvif from the radio and leaving arvif->ar uninitialized. While handling beacon miss for station interfaces, P2P interface is also encountered in the vif iteration and ath12k_mac_handle_beacon_miss_iter() tries to dereference the uninitialized arvif->deflink->ar. Fix this by verifying that vdev is created for the arvif before accessing its ar during beacon miss handling and similar vif iterator callbacks. ========================================================================== wlp6s0: detected beacon loss from AP (missed 7 beacons) - probing KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 5 UID: 0 PID: 0 Comm: swapper/5 Not tainted 6.16.0-rc1-wt-ath+ gregkh#2 PREEMPT(full) RIP: 0010:ath12k_mac_handle_beacon_miss_iter+0xb5/0x1a0 [ath12k] Call Trace: __iterate_interfaces+0x11a/0x410 [mac80211] ieee80211_iterate_active_interfaces_atomic+0x61/0x140 [mac80211] ath12k_mac_handle_beacon_miss+0xa1/0xf0 [ath12k] ath12k_roam_event+0x393/0x560 [ath12k] ath12k_wmi_op_rx+0x1486/0x28c0 [ath12k] ath12k_htc_process_trailer.isra.0+0x2fb/0x620 [ath12k] ath12k_htc_rx_completion_handler+0x448/0x830 [ath12k] ath12k_ce_recv_process_cb+0x549/0x9e0 [ath12k] ath12k_ce_per_engine_service+0xbe/0xf0 [ath12k] ath12k_pci_ce_workqueue+0x69/0x120 [ath12k] process_one_work+0xe3a/0x1430 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284.1-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: aa80f12 ("wifi: ath12k: defer vdev creation for MLO") Signed-off-by: Rameshkumar Sundaram <[email protected]> Reviewed-by: Vasanthakumar Thiagarajan <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jeff Johnson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 5fb9042 ] The issue was reproduced on NV10 using IGT pci_unplug test. It is expected that `amdgpu_driver_postclose_kms()` is called prior to `amdgpu_drm_release()`. However, the bug is that `amdgpu_fpriv` was freed in `amdgpu_driver_postclose_kms()`, and then later accessed in `amdgpu_drm_release()` via a call to `amdgpu_userq_mgr_fini()`. As a result, KASAN detected a use-after-free condition, as shown in the log below. The proposed fix is to move the calls to `amdgpu_eviction_fence_destroy()` and `amdgpu_userq_mgr_fini()` into `amdgpu_driver_postclose_kms()`, so they are invoked before `amdgpu_fpriv` is freed. This also ensures symmetry with the initialization path in `amdgpu_driver_open_kms()`, where the following components are initialized: - `amdgpu_userq_mgr_init()` - `amdgpu_eviction_fence_init()` - `amdgpu_ctx_mgr_init()` Correspondingly, in `amdgpu_driver_postclose_kms()` we should clean up using: - `amdgpu_userq_mgr_fini()` - `amdgpu_eviction_fence_destroy()` - `amdgpu_ctx_mgr_fini()` This change eliminates the use-after-free and improves consistency in resource management between open and close paths. [ +0.094367] ================================================================== [ +0.000026] BUG: KASAN: slab-use-after-free in amdgpu_userq_mgr_fini+0x70c/0x730 [amdgpu] [ +0.000866] Write of size 8 at addr ffff88811c068c60 by task amd_pci_unplug/1737 [ +0.000026] CPU: 3 UID: 0 PID: 1737 Comm: amd_pci_unplug Not tainted 6.14.0+ gregkh#2 [ +0.000008] Hardware name: ASUS System Product Name/ROG STRIX B550-F GAMING (WI-FI), BIOS 1401 12/03/2020 [ +0.000004] Call Trace: [ +0.000004] <TASK> [ +0.000003] dump_stack_lvl+0x76/0xa0 [ +0.000010] print_report+0xce/0x600 [ +0.000009] ? amdgpu_userq_mgr_fini+0x70c/0x730 [amdgpu] [ +0.000790] ? srso_return_thunk+0x5/0x5f [ +0.000007] ? kasan_complete_mode_report_info+0x76/0x200 [ +0.000008] ? amdgpu_userq_mgr_fini+0x70c/0x730 [amdgpu] [ +0.000684] kasan_report+0xbe/0x110 [ +0.000007] ? amdgpu_userq_mgr_fini+0x70c/0x730 [amdgpu] [ +0.000601] __asan_report_store8_noabort+0x17/0x30 [ +0.000007] amdgpu_userq_mgr_fini+0x70c/0x730 [amdgpu] [ +0.000801] ? __pfx_amdgpu_userq_mgr_fini+0x10/0x10 [amdgpu] [ +0.000819] ? srso_return_thunk+0x5/0x5f [ +0.000008] amdgpu_drm_release+0xa3/0xe0 [amdgpu] [ +0.000604] __fput+0x354/0xa90 [ +0.000010] __fput_sync+0x59/0x80 [ +0.000005] __x64_sys_close+0x7d/0xe0 [ +0.000006] x64_sys_call+0x2505/0x26f0 [ +0.000006] do_syscall_64+0x7c/0x170 [ +0.000004] ? kasan_record_aux_stack+0xae/0xd0 [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? kmem_cache_free+0x398/0x580 [ +0.000006] ? __fput+0x543/0xa90 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? __fput+0x543/0xa90 [ +0.000004] ? __kasan_check_read+0x11/0x20 [ +0.000007] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? __kasan_check_read+0x11/0x20 [ +0.000003] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? fpregs_assert_state_consistent+0x21/0xb0 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? syscall_exit_to_user_mode+0x4e/0x240 [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? do_syscall_64+0x88/0x170 [ +0.000003] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? do_syscall_64+0x88/0x170 [ +0.000004] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? irqentry_exit+0x43/0x50 [ +0.000004] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? exc_page_fault+0x7c/0x110 [ +0.000006] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ +0.000005] RIP: 0033:0x7ffff7b14f67 [ +0.000005] Code: ff e8 0d 16 02 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 73 ba f7 ff [ +0.000004] RSP: 002b:00007fffffffe358 EFLAGS: 00000246 ORIG_RAX: 0000000000000003 [ +0.000006] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ffff7b14f67 [ +0.000003] RDX: 0000000000000000 RSI: 00007ffff7f5755a RDI: 0000000000000003 [ +0.000003] RBP: 00007fffffffe380 R08: 0000555555568170 R09: 0000000000000000 [ +0.000003] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fffffffe5c8 [ +0.000003] R13: 00005555555552a9 R14: 0000555555557d48 R15: 00007ffff7ffd040 [ +0.000007] </TASK> [ +0.000286] Allocated by task 425 on cpu 11 at 29.751192s: [ +0.000013] kasan_save_stack+0x28/0x60 [ +0.000008] kasan_save_track+0x18/0x70 [ +0.000006] kasan_save_alloc_info+0x38/0x60 [ +0.000006] __kasan_kmalloc+0xc1/0xd0 [ +0.000005] __kmalloc_cache_noprof+0x1bd/0x430 [ +0.000006] amdgpu_driver_open_kms+0x172/0x760 [amdgpu] [ +0.000521] drm_file_alloc+0x569/0x9a0 [ +0.000008] drm_client_init+0x1b7/0x410 [ +0.000007] drm_fbdev_client_setup+0x174/0x470 [ +0.000007] drm_client_setup+0x8a/0xf0 [ +0.000006] amdgpu_pci_probe+0x50b/0x10d0 [amdgpu] [ +0.000482] local_pci_probe+0xe7/0x1b0 [ +0.000008] pci_device_probe+0x5bf/0x890 [ +0.000005] really_probe+0x1fd/0x950 [ +0.000007] __driver_probe_device+0x307/0x410 [ +0.000005] driver_probe_device+0x4e/0x150 [ +0.000006] __driver_attach+0x223/0x510 [ +0.000005] bus_for_each_dev+0x102/0x1a0 [ +0.000006] driver_attach+0x3d/0x60 [ +0.000005] bus_add_driver+0x309/0x650 [ +0.000005] driver_register+0x13d/0x490 [ +0.000006] __pci_register_driver+0x1ee/0x2b0 [ +0.000006] xfrm_ealg_get_byidx+0x43/0x50 [xfrm_algo] [ +0.000008] do_one_initcall+0x9c/0x3e0 [ +0.000007] do_init_module+0x29e/0x7f0 [ +0.000006] load_module+0x5c75/0x7c80 [ +0.000006] init_module_from_file+0x106/0x180 [ +0.000007] idempotent_init_module+0x377/0x740 [ +0.000006] __x64_sys_finit_module+0xd7/0x180 [ +0.000006] x64_sys_call+0x1f0b/0x26f0 [ +0.000006] do_syscall_64+0x7c/0x170 [ +0.000005] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ +0.000013] Freed by task 1737 on cpu 9 at 76.455063s: [ +0.000010] kasan_save_stack+0x28/0x60 [ +0.000006] kasan_save_track+0x18/0x70 [ +0.000005] kasan_save_free_info+0x3b/0x60 [ +0.000006] __kasan_slab_free+0x54/0x80 [ +0.000005] kfree+0x127/0x470 [ +0.000006] amdgpu_driver_postclose_kms+0x455/0x760 [amdgpu] [ +0.000485] drm_file_free.part.0+0x5b1/0xba0 [ +0.000007] drm_file_free+0x13/0x30 [ +0.000006] drm_client_release+0x1c4/0x2b0 [ +0.000006] drm_fbdev_ttm_fb_destroy+0xd2/0x120 [drm_ttm_helper] [ +0.000007] put_fb_info+0x97/0xe0 [ +0.000006] unregister_framebuffer+0x197/0x380 [ +0.000005] drm_fb_helper_unregister_info+0x94/0x100 [ +0.000005] drm_fbdev_client_unregister+0x3c/0x80 [ +0.000007] drm_client_dev_unregister+0x144/0x330 [ +0.000006] drm_dev_unregister+0x49/0x1b0 [ +0.000006] drm_dev_unplug+0x4c/0xd0 [ +0.000006] amdgpu_pci_remove+0x58/0x130 [amdgpu] [ +0.000482] pci_device_remove+0xae/0x1e0 [ +0.000006] device_remove+0xc7/0x180 [ +0.000006] device_release_driver_internal+0x3d4/0x5a0 [ +0.000007] device_release_driver+0x12/0x20 [ +0.000006] pci_stop_bus_device+0x104/0x150 [ +0.000006] pci_stop_and_remove_bus_device_locked+0x1b/0x40 [ +0.000005] remove_store+0xd7/0xf0 [ +0.000007] dev_attr_store+0x3f/0x80 [ +0.000006] sysfs_kf_write+0x125/0x1d0 [ +0.000005] kernfs_fop_write_iter+0x2ea/0x490 [ +0.000007] vfs_write+0x90d/0xe70 [ +0.000006] ksys_write+0x119/0x220 [ +0.000006] __x64_sys_write+0x72/0xc0 [ +0.000006] x64_sys_call+0x18ab/0x26f0 [ +0.000005] do_syscall_64+0x7c/0x170 [ +0.000005] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ +0.000013] The buggy address belongs to the object at ffff88811c068000 which belongs to the cache kmalloc-rnd-01-4k of size 4096 [ +0.000016] The buggy address is located 3168 bytes inside of freed 4096-byte region [ffff88811c068000, ffff88811c069000) [ +0.000022] The buggy address belongs to the physical page: [ +0.000010] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff88811c06e000 pfn:0x11c068 [ +0.000006] head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ +0.000006] flags: 0x17ffffc0000040(head|node=0|zone=2|lastcpupid=0x1fffff) [ +0.000007] page_type: f5(slab) [ +0.000007] raw: 0017ffffc0000040 ffff88810004c140 dead000000000122 0000000000000000 [ +0.000005] raw: ffff88811c06e000 0000000080040002 00000000f5000000 0000000000000000 [ +0.000006] head: 0017ffffc0000040 ffff88810004c140 dead000000000122 0000000000000000 [ +0.000005] head: ffff88811c06e000 0000000080040002 00000000f5000000 0000000000000000 [ +0.000006] head: 0017ffffc0000003 ffffea0004701a01 ffffffffffffffff 0000000000000000 [ +0.000005] head: 0000000000000008 0000000000000000 00000000ffffffff 0000000000000000 [ +0.000004] page dumped because: kasan: bad access detected [ +0.000011] Memory state around the buggy address: [ +0.000009] ffff88811c068b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ +0.000012] ffff88811c068b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ +0.000011] >ffff88811c068c00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ +0.000011] ^ [ +0.000010] ffff88811c068c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ +0.000011] ffff88811c068d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ +0.000011] ================================================================== Cc: Alex Deucher <[email protected]> Cc: Christian König <[email protected]> Cc: Lijo Lazar <[email protected]> Cc: Jesse Zhang <[email protected]> Cc: Arvind Yadav <[email protected]> v2: drop amdgpu_drm_release() and assign drm_release() as the callback directly.(Alex) Fixes: adba092 ("drm/amdgpu: Fix Illegal opcode in command stream Error") Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Vitaly Prosyak <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit a886d26 ] [ +0.000020] BUG: KASAN: slab-use-after-free in amdgpu_userq_suspend+0x51a/0x5a0 [amdgpu] [ +0.000817] Read of size 8 at addr ffff88812eec8c58 by task amd_pci_unplug/1733 [ +0.000027] CPU: 10 UID: 0 PID: 1733 Comm: amd_pci_unplug Tainted: G W 6.14.0+ gregkh#2 [ +0.000009] Tainted: [W]=WARN [ +0.000003] Hardware name: ASUS System Product Name/ROG STRIX B550-F GAMING (WI-FI), BIOS 1401 12/03/2020 [ +0.000004] Call Trace: [ +0.000004] <TASK> [ +0.000003] dump_stack_lvl+0x76/0xa0 [ +0.000011] print_report+0xce/0x600 [ +0.000009] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? kasan_complete_mode_report_info+0x76/0x200 [ +0.000007] ? kasan_addr_to_slab+0xd/0xb0 [ +0.000006] ? amdgpu_userq_suspend+0x51a/0x5a0 [amdgpu] [ +0.000707] kasan_report+0xbe/0x110 [ +0.000006] ? amdgpu_userq_suspend+0x51a/0x5a0 [amdgpu] [ +0.000541] __asan_report_load8_noabort+0x14/0x30 [ +0.000005] amdgpu_userq_suspend+0x51a/0x5a0 [amdgpu] [ +0.000535] ? stop_cpsch+0x396/0x600 [amdgpu] [ +0.000556] ? stop_cpsch+0x429/0x600 [amdgpu] [ +0.000536] ? __pfx_amdgpu_userq_suspend+0x10/0x10 [amdgpu] [ +0.000536] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? kgd2kfd_suspend+0x132/0x1d0 [amdgpu] [ +0.000542] amdgpu_device_fini_hw+0x581/0xe90 [amdgpu] [ +0.000485] ? down_write+0xbb/0x140 [ +0.000007] ? __mutex_unlock_slowpath.constprop.0+0x317/0x360 [ +0.000005] ? __pfx_amdgpu_device_fini_hw+0x10/0x10 [amdgpu] [ +0.000482] ? __kasan_check_write+0x14/0x30 [ +0.000004] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? up_write+0x55/0xb0 [ +0.000007] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? blocking_notifier_chain_unregister+0x6c/0xc0 [ +0.000008] amdgpu_driver_unload_kms+0x69/0x90 [amdgpu] [ +0.000484] amdgpu_pci_remove+0x93/0x130 [amdgpu] [ +0.000482] pci_device_remove+0xae/0x1e0 [ +0.000008] device_remove+0xc7/0x180 [ +0.000008] device_release_driver_internal+0x3d4/0x5a0 [ +0.000007] device_release_driver+0x12/0x20 [ +0.000004] pci_stop_bus_device+0x104/0x150 [ +0.000006] pci_stop_and_remove_bus_device_locked+0x1b/0x40 [ +0.000005] remove_store+0xd7/0xf0 [ +0.000005] ? __pfx_remove_store+0x10/0x10 [ +0.000006] ? __pfx__copy_from_iter+0x10/0x10 [ +0.000006] ? __pfx_dev_attr_store+0x10/0x10 [ +0.000006] dev_attr_store+0x3f/0x80 [ +0.000006] sysfs_kf_write+0x125/0x1d0 [ +0.000004] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? __kasan_check_write+0x14/0x30 [ +0.000005] kernfs_fop_write_iter+0x2ea/0x490 [ +0.000005] ? rw_verify_area+0x70/0x420 [ +0.000005] ? __pfx_kernfs_fop_write_iter+0x10/0x10 [ +0.000006] vfs_write+0x90d/0xe70 [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? __pfx_vfs_write+0x10/0x10 [ +0.000004] ? local_clock+0x15/0x30 [ +0.000008] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? __kasan_slab_free+0x5f/0x80 [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? __kasan_check_read+0x11/0x20 [ +0.000004] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? fdget_pos+0x1d3/0x500 [ +0.000007] ksys_write+0x119/0x220 [ +0.000005] ? putname+0x1c/0x30 [ +0.000006] ? __pfx_ksys_write+0x10/0x10 [ +0.000007] __x64_sys_write+0x72/0xc0 [ +0.000006] x64_sys_call+0x18ab/0x26f0 [ +0.000006] do_syscall_64+0x7c/0x170 [ +0.000004] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? __pfx___x64_sys_openat+0x10/0x10 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? __kasan_check_read+0x11/0x20 [ +0.000003] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? fpregs_assert_state_consistent+0x21/0xb0 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? syscall_exit_to_user_mode+0x4e/0x240 [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? do_syscall_64+0x88/0x170 [ +0.000003] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? irqentry_exit+0x43/0x50 [ +0.000004] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? exc_page_fault+0x7c/0x110 [ +0.000006] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ +0.000006] RIP: 0033:0x7480c0b14887 [ +0.000005] Code: 10 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 [ +0.000005] RSP: 002b:00007fff142b0058 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ +0.000006] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007480c0b14887 [ +0.000003] RDX: 0000000000000001 RSI: 00007480c0e7365a RDI: 0000000000000004 [ +0.000003] RBP: 00007fff142b0080 R08: 0000563b2e73c170 R09: 0000000000000000 [ +0.000003] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff142b02f8 [ +0.000003] R13: 0000563b159a72a9 R14: 0000563b159a9d48 R15: 00007480c0f19040 [ +0.000008] </TASK> [ +0.000445] Allocated by task 427 on cpu 5 at 29.342331s: [ +0.000011] kasan_save_stack+0x28/0x60 [ +0.000006] kasan_save_track+0x18/0x70 [ +0.000006] kasan_save_alloc_info+0x38/0x60 [ +0.000005] __kasan_kmalloc+0xc1/0xd0 [ +0.000006] __kmalloc_cache_noprof+0x1bd/0x430 [ +0.000007] amdgpu_driver_open_kms+0x172/0x760 [amdgpu] [ +0.000493] drm_file_alloc+0x569/0x9a0 [ +0.000007] drm_client_init+0x1b7/0x410 [ +0.000007] drm_fbdev_client_setup+0x174/0x470 [ +0.000006] drm_client_setup+0x8a/0xf0 [ +0.000006] amdgpu_pci_probe+0x510/0x10c0 [amdgpu] [ +0.000483] local_pci_probe+0xe7/0x1b0 [ +0.000006] pci_device_probe+0x5bf/0x890 [ +0.000006] really_probe+0x1fd/0x950 [ +0.000005] __driver_probe_device+0x307/0x410 [ +0.000006] driver_probe_device+0x4e/0x150 [ +0.000005] __driver_attach+0x223/0x510 [ +0.000006] bus_for_each_dev+0x102/0x1a0 [ +0.000005] driver_attach+0x3d/0x60 [ +0.000006] bus_add_driver+0x309/0x650 [ +0.000005] driver_register+0x13d/0x490 [ +0.000006] __pci_register_driver+0x1ee/0x2b0 [ +0.000006] rfcomm_dlc_clear_state+0x69/0x220 [rfcomm] [ +0.000011] do_one_initcall+0x9c/0x3e0 [ +0.000007] do_init_module+0x29e/0x7f0 [ +0.000006] load_module+0x5c75/0x7c80 [ +0.000006] init_module_from_file+0x106/0x180 [ +0.000006] idempotent_init_module+0x377/0x740 [ +0.000006] __x64_sys_finit_module+0xd7/0x180 [ +0.000006] x64_sys_call+0x1f0b/0x26f0 [ +0.000006] do_syscall_64+0x7c/0x170 [ +0.000005] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ +0.000013] Freed by task 1733 on cpu 5 at 59.907086s: [ +0.000011] kasan_save_stack+0x28/0x60 [ +0.000006] kasan_save_track+0x18/0x70 [ +0.000005] kasan_save_free_info+0x3b/0x60 [ +0.000005] __kasan_slab_free+0x54/0x80 [ +0.000006] kfree+0x127/0x470 [ +0.000006] amdgpu_driver_postclose_kms+0x455/0x760 [amdgpu] [ +0.000493] drm_file_free.part.0+0x5b1/0xba0 [ +0.000006] drm_file_free+0x13/0x30 [ +0.000006] drm_client_release+0x1c4/0x2b0 [ +0.000006] drm_fbdev_ttm_fb_destroy+0xd2/0x120 [drm_ttm_helper] [ +0.000007] put_fb_info+0x97/0xe0 [ +0.000007] unregister_framebuffer+0x197/0x380 [ +0.000005] drm_fb_helper_unregister_info+0x94/0x100 [ +0.000005] drm_fbdev_client_unregister+0x3c/0x80 [ +0.000007] drm_client_dev_unregister+0x144/0x330 [ +0.000006] drm_dev_unregister+0x49/0x1b0 [ +0.000006] drm_dev_unplug+0x4c/0xd0 [ +0.000006] amdgpu_pci_remove+0x58/0x130 [amdgpu] [ +0.000484] pci_device_remove+0xae/0x1e0 [ +0.000008] device_remove+0xc7/0x180 [ +0.000007] device_release_driver_internal+0x3d4/0x5a0 [ +0.000006] device_release_driver+0x12/0x20 [ +0.000007] pci_stop_bus_device+0x104/0x150 [ +0.000006] pci_stop_and_remove_bus_device_locked+0x1b/0x40 [ +0.000006] remove_store+0xd7/0xf0 [ +0.000006] dev_attr_store+0x3f/0x80 [ +0.000005] sysfs_kf_write+0x125/0x1d0 [ +0.000006] kernfs_fop_write_iter+0x2ea/0x490 [ +0.000006] vfs_write+0x90d/0xe70 [ +0.000006] ksys_write+0x119/0x220 [ +0.000006] __x64_sys_write+0x72/0xc0 [ +0.000006] x64_sys_call+0x18ab/0x26f0 [ +0.000005] do_syscall_64+0x7c/0x170 [ +0.000006] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ +0.000012] The buggy address belongs to the object at ffff88812eec8000 which belongs to the cache kmalloc-rnd-07-4k of size 4096 [ +0.000016] The buggy address is located 3160 bytes inside of freed 4096-byte region [ffff88812eec8000, ffff88812eec9000) [ +0.000023] The buggy address belongs to the physical page: [ +0.000009] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x12eec8 [ +0.000007] head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ +0.000005] flags: 0x17ffffc0000040(head|node=0|zone=2|lastcpupid=0x1fffff) [ +0.000007] page_type: f5(slab) [ +0.000008] raw: 0017ffffc0000040 ffff888100054500 dead000000000122 0000000000000000 [ +0.000005] raw: 0000000000000000 0000000080040004 00000000f5000000 0000000000000000 [ +0.000006] head: 0017ffffc0000040 ffff888100054500 dead000000000122 0000000000000000 [ +0.000005] head: 0000000000000000 0000000080040004 00000000f5000000 0000000000000000 [ +0.000006] head: 0017ffffc0000003 ffffea0004bbb201 ffffffffffffffff 0000000000000000 [ +0.000005] head: 0000000000000008 0000000000000000 00000000ffffffff 0000000000000000 [ +0.000005] page dumped because: kasan: bad access detected [ +0.000010] Memory state around the buggy address: [ +0.000009] ffff88812eec8b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ +0.000012] ffff88812eec8b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ +0.000011] >ffff88812eec8c00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ +0.000011] ^ [ +0.000010] ffff88812eec8c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ +0.000011] ffff88812eec8d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ +0.000011] ================================================================== The use-after-free occurs because a delayed work item (`suspend_work`) may still be pending or running when resources it accesses are freed during device removal or file close. The previous code used `flush_work(&fpriv->evf_mgr.suspend_work.work)`, which does not wait for delayed work that has not yet started. As a result, the delayed work could run after its memory was freed, causing a use-after-free. By switching to `flush_delayed_work(&fpriv->evf_mgr.suspend_work)`, we ensure that the kernel waits for both queued and delayed work to finish before freeing memory, closing this race. Fixes: adba092 ("drm/amdgpu: Fix Illegal opcode in command stream Error") Signed-off-by: Vitaly Prosyak <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 17ce3e5 ] syzbot reported that the netfilter bpf prog can be called without migration disabled in xmit path. Then the assertion in __bpf_prog_run() fails, triggering the splat below. [0] Let's use bpf_prog_run_pin_on_cpu() in nf_hook_run_bpf(). [0]: BUG: assuming non migratable context at ./include/linux/filter.h:703 in_atomic(): 0, irqs_disabled(): 0, migration_disabled() 0 pid: 5829, name: sshd-session 3 locks held by sshd-session/5829: #0: ffff88807b4e4218 (sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1667 [inline] #0: ffff88807b4e4218 (sk_lock-AF_INET){+.+.}-{0:0}, at: tcp_sendmsg+0x20/0x50 net/ipv4/tcp.c:1395 gregkh#1: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire include/linux/rcupdate.h:331 [inline] gregkh#1: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_read_lock include/linux/rcupdate.h:841 [inline] gregkh#1: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: __ip_queue_xmit+0x69/0x26c0 net/ipv4/ip_output.c:470 gregkh#2: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire include/linux/rcupdate.h:331 [inline] gregkh#2: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_read_lock include/linux/rcupdate.h:841 [inline] gregkh#2: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: nf_hook+0xb2/0x680 include/linux/netfilter.h:241 CPU: 0 UID: 0 PID: 5829 Comm: sshd-session Not tainted 6.16.0-rc6-syzkaller-00002-g155a3c003e55 #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x16c/0x1f0 lib/dump_stack.c:120 __cant_migrate kernel/sched/core.c:8860 [inline] __cant_migrate+0x1c7/0x250 kernel/sched/core.c:8834 __bpf_prog_run include/linux/filter.h:703 [inline] bpf_prog_run include/linux/filter.h:725 [inline] nf_hook_run_bpf+0x83/0x1e0 net/netfilter/nf_bpf_link.c:20 nf_hook_entry_hookfn include/linux/netfilter.h:157 [inline] nf_hook_slow+0xbb/0x200 net/netfilter/core.c:623 nf_hook+0x370/0x680 include/linux/netfilter.h:272 NF_HOOK_COND include/linux/netfilter.h:305 [inline] ip_output+0x1bc/0x2a0 net/ipv4/ip_output.c:433 dst_output include/net/dst.h:459 [inline] ip_local_out net/ipv4/ip_output.c:129 [inline] __ip_queue_xmit+0x1d7d/0x26c0 net/ipv4/ip_output.c:527 __tcp_transmit_skb+0x2686/0x3e90 net/ipv4/tcp_output.c:1479 tcp_transmit_skb net/ipv4/tcp_output.c:1497 [inline] tcp_write_xmit+0x1274/0x84e0 net/ipv4/tcp_output.c:2838 __tcp_push_pending_frames+0xaf/0x390 net/ipv4/tcp_output.c:3021 tcp_push+0x225/0x700 net/ipv4/tcp.c:759 tcp_sendmsg_locked+0x1870/0x42b0 net/ipv4/tcp.c:1359 tcp_sendmsg+0x2e/0x50 net/ipv4/tcp.c:1396 inet_sendmsg+0xb9/0x140 net/ipv4/af_inet.c:851 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg net/socket.c:727 [inline] sock_write_iter+0x4aa/0x5b0 net/socket.c:1131 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x6c7/0x1150 fs/read_write.c:686 ksys_write+0x1f8/0x250 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fe7d365d407 Code: 48 89 fa 4c 89 df e8 38 aa 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 fa 08 75 de e8 23 ff ff ff RSP: Fixes: fd9c663 ("bpf: minimal support for programs hooked into netfilter framework") Reported-by: [email protected] Closes: https://lore.kernel.org/all/[email protected]/ Signed-off-by: Kuniyuki Iwashima <[email protected]> Signed-off-by: Martin KaFai Lau <[email protected]> Tested-by: [email protected] Acked-by: Florian Westphal <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 4668619 ] When the root of a nested PCIe bridge configuration is unplugged, the pnv_php driver leaked the allocated IRQ resources for the child bridges' hotplug event notifications, resulting in a panic. Fix this by walking all child buses and deallocating all its IRQ resources before calling pci_hp_remove_devices(). Also modify the lifetime of the workqueue at struct pnv_php_slot::wq so that it is only destroyed in pnv_php_free_slot(), instead of pnv_php_disable_irq(). This is required since pnv_php_disable_irq() will now be called by workers triggered by hot unplug interrupts, so the workqueue needs to stay allocated. The abridged kernel panic that occurs without this patch is as follows: WARNING: CPU: 0 PID: 687 at kernel/irq/msi.c:292 msi_device_data_release+0x6c/0x9c CPU: 0 UID: 0 PID: 687 Comm: bash Not tainted 6.14.0-rc5+ gregkh#2 Call Trace: msi_device_data_release+0x34/0x9c (unreliable) release_nodes+0x64/0x13c devres_release_all+0xc0/0x140 device_del+0x2d4/0x46c pci_destroy_dev+0x5c/0x194 pci_hp_remove_devices+0x90/0x128 pci_hp_remove_devices+0x44/0x128 pnv_php_disable_slot+0x54/0xd4 power_write_file+0xf8/0x18c pci_slot_attr_store+0x40/0x5c sysfs_kf_write+0x64/0x78 kernfs_fop_write_iter+0x1b0/0x290 vfs_write+0x3bc/0x50c ksys_write+0x84/0x140 system_call_exception+0x124/0x230 system_call_vectored_common+0x15c/0x2ec Signed-off-by: Shawn Anastasio <[email protected]> Signed-off-by: Timothy Pearson <[email protected]> [bhelgaas: tidy comments] Signed-off-by: Bjorn Helgaas <[email protected]> Signed-off-by: Madhavan Srinivasan <[email protected]> Link: https://patch.msgid.link/2013845045.1359852.1752615367790.JavaMail.zimbra@raptorengineeringinc.com Signed-off-by: Sasha Levin <[email protected]>

commit 17ec2f9 upstream. Let the guest set DEBUGCTL.RTM_DEBUG if RTM is supported according to the guest CPUID model, as debug support is supposed to be available if RTM is supported, and there are no known downsides to letting the guest debug RTM aborts. Note, there are no known bug reports related to RTM_DEBUG, the primary motivation is to reduce the probability of breaking existing guests when a future change adds a missing consistency check on vmcs12.GUEST_DEBUGCTL (KVM currently lets L2 run with whatever hardware supports; whoops). Note gregkh#2, KVM already emulates DR6.RTM, and doesn't restrict access to DR7.RTM. Fixes: 83c5291 ("KVM: x86: expose Intel cpu new features (HLE, RTM) to guest") Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sean Christopherson <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 17ce3e5 ] syzbot reported that the netfilter bpf prog can be called without migration disabled in xmit path. Then the assertion in __bpf_prog_run() fails, triggering the splat below. [0] Let's use bpf_prog_run_pin_on_cpu() in nf_hook_run_bpf(). [0]: BUG: assuming non migratable context at ./include/linux/filter.h:703 in_atomic(): 0, irqs_disabled(): 0, migration_disabled() 0 pid: 5829, name: sshd-session 3 locks held by sshd-session/5829: #0: ffff88807b4e4218 (sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1667 [inline] #0: ffff88807b4e4218 (sk_lock-AF_INET){+.+.}-{0:0}, at: tcp_sendmsg+0x20/0x50 net/ipv4/tcp.c:1395 gregkh#1: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire include/linux/rcupdate.h:331 [inline] gregkh#1: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_read_lock include/linux/rcupdate.h:841 [inline] gregkh#1: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: __ip_queue_xmit+0x69/0x26c0 net/ipv4/ip_output.c:470 gregkh#2: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire include/linux/rcupdate.h:331 [inline] gregkh#2: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_read_lock include/linux/rcupdate.h:841 [inline] gregkh#2: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: nf_hook+0xb2/0x680 include/linux/netfilter.h:241 CPU: 0 UID: 0 PID: 5829 Comm: sshd-session Not tainted 6.16.0-rc6-syzkaller-00002-g155a3c003e55 #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x16c/0x1f0 lib/dump_stack.c:120 __cant_migrate kernel/sched/core.c:8860 [inline] __cant_migrate+0x1c7/0x250 kernel/sched/core.c:8834 __bpf_prog_run include/linux/filter.h:703 [inline] bpf_prog_run include/linux/filter.h:725 [inline] nf_hook_run_bpf+0x83/0x1e0 net/netfilter/nf_bpf_link.c:20 nf_hook_entry_hookfn include/linux/netfilter.h:157 [inline] nf_hook_slow+0xbb/0x200 net/netfilter/core.c:623 nf_hook+0x370/0x680 include/linux/netfilter.h:272 NF_HOOK_COND include/linux/netfilter.h:305 [inline] ip_output+0x1bc/0x2a0 net/ipv4/ip_output.c:433 dst_output include/net/dst.h:459 [inline] ip_local_out net/ipv4/ip_output.c:129 [inline] __ip_queue_xmit+0x1d7d/0x26c0 net/ipv4/ip_output.c:527 __tcp_transmit_skb+0x2686/0x3e90 net/ipv4/tcp_output.c:1479 tcp_transmit_skb net/ipv4/tcp_output.c:1497 [inline] tcp_write_xmit+0x1274/0x84e0 net/ipv4/tcp_output.c:2838 __tcp_push_pending_frames+0xaf/0x390 net/ipv4/tcp_output.c:3021 tcp_push+0x225/0x700 net/ipv4/tcp.c:759 tcp_sendmsg_locked+0x1870/0x42b0 net/ipv4/tcp.c:1359 tcp_sendmsg+0x2e/0x50 net/ipv4/tcp.c:1396 inet_sendmsg+0xb9/0x140 net/ipv4/af_inet.c:851 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg net/socket.c:727 [inline] sock_write_iter+0x4aa/0x5b0 net/socket.c:1131 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x6c7/0x1150 fs/read_write.c:686 ksys_write+0x1f8/0x250 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fe7d365d407 Code: 48 89 fa 4c 89 df e8 38 aa 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 fa 08 75 de e8 23 ff ff ff RSP: Fixes: fd9c663 ("bpf: minimal support for programs hooked into netfilter framework") Reported-by: [email protected] Closes: https://lore.kernel.org/all/[email protected]/ Signed-off-by: Kuniyuki Iwashima <[email protected]> Signed-off-by: Martin KaFai Lau <[email protected]> Tested-by: [email protected] Acked-by: Florian Westphal <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 4668619 ] When the root of a nested PCIe bridge configuration is unplugged, the pnv_php driver leaked the allocated IRQ resources for the child bridges' hotplug event notifications, resulting in a panic. Fix this by walking all child buses and deallocating all its IRQ resources before calling pci_hp_remove_devices(). Also modify the lifetime of the workqueue at struct pnv_php_slot::wq so that it is only destroyed in pnv_php_free_slot(), instead of pnv_php_disable_irq(). This is required since pnv_php_disable_irq() will now be called by workers triggered by hot unplug interrupts, so the workqueue needs to stay allocated. The abridged kernel panic that occurs without this patch is as follows: WARNING: CPU: 0 PID: 687 at kernel/irq/msi.c:292 msi_device_data_release+0x6c/0x9c CPU: 0 UID: 0 PID: 687 Comm: bash Not tainted 6.14.0-rc5+ gregkh#2 Call Trace: msi_device_data_release+0x34/0x9c (unreliable) release_nodes+0x64/0x13c devres_release_all+0xc0/0x140 device_del+0x2d4/0x46c pci_destroy_dev+0x5c/0x194 pci_hp_remove_devices+0x90/0x128 pci_hp_remove_devices+0x44/0x128 pnv_php_disable_slot+0x54/0xd4 power_write_file+0xf8/0x18c pci_slot_attr_store+0x40/0x5c sysfs_kf_write+0x64/0x78 kernfs_fop_write_iter+0x1b0/0x290 vfs_write+0x3bc/0x50c ksys_write+0x84/0x140 system_call_exception+0x124/0x230 system_call_vectored_common+0x15c/0x2ec Signed-off-by: Shawn Anastasio <[email protected]> Signed-off-by: Timothy Pearson <[email protected]> [bhelgaas: tidy comments] Signed-off-by: Bjorn Helgaas <[email protected]> Signed-off-by: Madhavan Srinivasan <[email protected]> Link: https://patch.msgid.link/2013845045.1359852.1752615367790.JavaMail.zimbra@raptorengineeringinc.com Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 17ce3e5 ] syzbot reported that the netfilter bpf prog can be called without migration disabled in xmit path. Then the assertion in __bpf_prog_run() fails, triggering the splat below. [0] Let's use bpf_prog_run_pin_on_cpu() in nf_hook_run_bpf(). [0]: BUG: assuming non migratable context at ./include/linux/filter.h:703 in_atomic(): 0, irqs_disabled(): 0, migration_disabled() 0 pid: 5829, name: sshd-session 3 locks held by sshd-session/5829: #0: ffff88807b4e4218 (sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1667 [inline] #0: ffff88807b4e4218 (sk_lock-AF_INET){+.+.}-{0:0}, at: tcp_sendmsg+0x20/0x50 net/ipv4/tcp.c:1395 gregkh#1: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire include/linux/rcupdate.h:331 [inline] gregkh#1: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_read_lock include/linux/rcupdate.h:841 [inline] gregkh#1: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: __ip_queue_xmit+0x69/0x26c0 net/ipv4/ip_output.c:470 gregkh#2: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire include/linux/rcupdate.h:331 [inline] gregkh#2: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_read_lock include/linux/rcupdate.h:841 [inline] gregkh#2: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: nf_hook+0xb2/0x680 include/linux/netfilter.h:241 CPU: 0 UID: 0 PID: 5829 Comm: sshd-session Not tainted 6.16.0-rc6-syzkaller-00002-g155a3c003e55 #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x16c/0x1f0 lib/dump_stack.c:120 __cant_migrate kernel/sched/core.c:8860 [inline] __cant_migrate+0x1c7/0x250 kernel/sched/core.c:8834 __bpf_prog_run include/linux/filter.h:703 [inline] bpf_prog_run include/linux/filter.h:725 [inline] nf_hook_run_bpf+0x83/0x1e0 net/netfilter/nf_bpf_link.c:20 nf_hook_entry_hookfn include/linux/netfilter.h:157 [inline] nf_hook_slow+0xbb/0x200 net/netfilter/core.c:623 nf_hook+0x370/0x680 include/linux/netfilter.h:272 NF_HOOK_COND include/linux/netfilter.h:305 [inline] ip_output+0x1bc/0x2a0 net/ipv4/ip_output.c:433 dst_output include/net/dst.h:459 [inline] ip_local_out net/ipv4/ip_output.c:129 [inline] __ip_queue_xmit+0x1d7d/0x26c0 net/ipv4/ip_output.c:527 __tcp_transmit_skb+0x2686/0x3e90 net/ipv4/tcp_output.c:1479 tcp_transmit_skb net/ipv4/tcp_output.c:1497 [inline] tcp_write_xmit+0x1274/0x84e0 net/ipv4/tcp_output.c:2838 __tcp_push_pending_frames+0xaf/0x390 net/ipv4/tcp_output.c:3021 tcp_push+0x225/0x700 net/ipv4/tcp.c:759 tcp_sendmsg_locked+0x1870/0x42b0 net/ipv4/tcp.c:1359 tcp_sendmsg+0x2e/0x50 net/ipv4/tcp.c:1396 inet_sendmsg+0xb9/0x140 net/ipv4/af_inet.c:851 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg net/socket.c:727 [inline] sock_write_iter+0x4aa/0x5b0 net/socket.c:1131 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x6c7/0x1150 fs/read_write.c:686 ksys_write+0x1f8/0x250 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fe7d365d407 Code: 48 89 fa 4c 89 df e8 38 aa 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 fa 08 75 de e8 23 ff ff ff RSP: Fixes: fd9c663 ("bpf: minimal support for programs hooked into netfilter framework") Reported-by: [email protected] Closes: https://lore.kernel.org/all/[email protected]/ Signed-off-by: Kuniyuki Iwashima <[email protected]> Signed-off-by: Martin KaFai Lau <[email protected]> Tested-by: [email protected] Acked-by: Florian Westphal <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 4668619 ] When the root of a nested PCIe bridge configuration is unplugged, the pnv_php driver leaked the allocated IRQ resources for the child bridges' hotplug event notifications, resulting in a panic. Fix this by walking all child buses and deallocating all its IRQ resources before calling pci_hp_remove_devices(). Also modify the lifetime of the workqueue at struct pnv_php_slot::wq so that it is only destroyed in pnv_php_free_slot(), instead of pnv_php_disable_irq(). This is required since pnv_php_disable_irq() will now be called by workers triggered by hot unplug interrupts, so the workqueue needs to stay allocated. The abridged kernel panic that occurs without this patch is as follows: WARNING: CPU: 0 PID: 687 at kernel/irq/msi.c:292 msi_device_data_release+0x6c/0x9c CPU: 0 UID: 0 PID: 687 Comm: bash Not tainted 6.14.0-rc5+ gregkh#2 Call Trace: msi_device_data_release+0x34/0x9c (unreliable) release_nodes+0x64/0x13c devres_release_all+0xc0/0x140 device_del+0x2d4/0x46c pci_destroy_dev+0x5c/0x194 pci_hp_remove_devices+0x90/0x128 pci_hp_remove_devices+0x44/0x128 pnv_php_disable_slot+0x54/0xd4 power_write_file+0xf8/0x18c pci_slot_attr_store+0x40/0x5c sysfs_kf_write+0x64/0x78 kernfs_fop_write_iter+0x1b0/0x290 vfs_write+0x3bc/0x50c ksys_write+0x84/0x140 system_call_exception+0x124/0x230 system_call_vectored_common+0x15c/0x2ec Signed-off-by: Shawn Anastasio <[email protected]> Signed-off-by: Timothy Pearson <[email protected]> [bhelgaas: tidy comments] Signed-off-by: Bjorn Helgaas <[email protected]> Signed-off-by: Madhavan Srinivasan <[email protected]> Link: https://patch.msgid.link/2013845045.1359852.1752615367790.JavaMail.zimbra@raptorengineeringinc.com Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 17ce3e5 ] syzbot reported that the netfilter bpf prog can be called without migration disabled in xmit path. Then the assertion in __bpf_prog_run() fails, triggering the splat below. [0] Let's use bpf_prog_run_pin_on_cpu() in nf_hook_run_bpf(). [0]: BUG: assuming non migratable context at ./include/linux/filter.h:703 in_atomic(): 0, irqs_disabled(): 0, migration_disabled() 0 pid: 5829, name: sshd-session 3 locks held by sshd-session/5829: #0: ffff88807b4e4218 (sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1667 [inline] #0: ffff88807b4e4218 (sk_lock-AF_INET){+.+.}-{0:0}, at: tcp_sendmsg+0x20/0x50 net/ipv4/tcp.c:1395 gregkh#1: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire include/linux/rcupdate.h:331 [inline] gregkh#1: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_read_lock include/linux/rcupdate.h:841 [inline] gregkh#1: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: __ip_queue_xmit+0x69/0x26c0 net/ipv4/ip_output.c:470 gregkh#2: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire include/linux/rcupdate.h:331 [inline] gregkh#2: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_read_lock include/linux/rcupdate.h:841 [inline] gregkh#2: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: nf_hook+0xb2/0x680 include/linux/netfilter.h:241 CPU: 0 UID: 0 PID: 5829 Comm: sshd-session Not tainted 6.16.0-rc6-syzkaller-00002-g155a3c003e55 #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x16c/0x1f0 lib/dump_stack.c:120 __cant_migrate kernel/sched/core.c:8860 [inline] __cant_migrate+0x1c7/0x250 kernel/sched/core.c:8834 __bpf_prog_run include/linux/filter.h:703 [inline] bpf_prog_run include/linux/filter.h:725 [inline] nf_hook_run_bpf+0x83/0x1e0 net/netfilter/nf_bpf_link.c:20 nf_hook_entry_hookfn include/linux/netfilter.h:157 [inline] nf_hook_slow+0xbb/0x200 net/netfilter/core.c:623 nf_hook+0x370/0x680 include/linux/netfilter.h:272 NF_HOOK_COND include/linux/netfilter.h:305 [inline] ip_output+0x1bc/0x2a0 net/ipv4/ip_output.c:433 dst_output include/net/dst.h:459 [inline] ip_local_out net/ipv4/ip_output.c:129 [inline] __ip_queue_xmit+0x1d7d/0x26c0 net/ipv4/ip_output.c:527 __tcp_transmit_skb+0x2686/0x3e90 net/ipv4/tcp_output.c:1479 tcp_transmit_skb net/ipv4/tcp_output.c:1497 [inline] tcp_write_xmit+0x1274/0x84e0 net/ipv4/tcp_output.c:2838 __tcp_push_pending_frames+0xaf/0x390 net/ipv4/tcp_output.c:3021 tcp_push+0x225/0x700 net/ipv4/tcp.c:759 tcp_sendmsg_locked+0x1870/0x42b0 net/ipv4/tcp.c:1359 tcp_sendmsg+0x2e/0x50 net/ipv4/tcp.c:1396 inet_sendmsg+0xb9/0x140 net/ipv4/af_inet.c:851 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg net/socket.c:727 [inline] sock_write_iter+0x4aa/0x5b0 net/socket.c:1131 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x6c7/0x1150 fs/read_write.c:686 ksys_write+0x1f8/0x250 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fe7d365d407 Code: 48 89 fa 4c 89 df e8 38 aa 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 fa 08 75 de e8 23 ff ff ff RSP: Fixes: fd9c663 ("bpf: minimal support for programs hooked into netfilter framework") Reported-by: [email protected] Closes: https://lore.kernel.org/all/[email protected]/ Signed-off-by: Kuniyuki Iwashima <[email protected]> Signed-off-by: Martin KaFai Lau <[email protected]> Tested-by: [email protected] Acked-by: Florian Westphal <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 4668619 ] When the root of a nested PCIe bridge configuration is unplugged, the pnv_php driver leaked the allocated IRQ resources for the child bridges' hotplug event notifications, resulting in a panic. Fix this by walking all child buses and deallocating all its IRQ resources before calling pci_hp_remove_devices(). Also modify the lifetime of the workqueue at struct pnv_php_slot::wq so that it is only destroyed in pnv_php_free_slot(), instead of pnv_php_disable_irq(). This is required since pnv_php_disable_irq() will now be called by workers triggered by hot unplug interrupts, so the workqueue needs to stay allocated. The abridged kernel panic that occurs without this patch is as follows: WARNING: CPU: 0 PID: 687 at kernel/irq/msi.c:292 msi_device_data_release+0x6c/0x9c CPU: 0 UID: 0 PID: 687 Comm: bash Not tainted 6.14.0-rc5+ gregkh#2 Call Trace: msi_device_data_release+0x34/0x9c (unreliable) release_nodes+0x64/0x13c devres_release_all+0xc0/0x140 device_del+0x2d4/0x46c pci_destroy_dev+0x5c/0x194 pci_hp_remove_devices+0x90/0x128 pci_hp_remove_devices+0x44/0x128 pnv_php_disable_slot+0x54/0xd4 power_write_file+0xf8/0x18c pci_slot_attr_store+0x40/0x5c sysfs_kf_write+0x64/0x78 kernfs_fop_write_iter+0x1b0/0x290 vfs_write+0x3bc/0x50c ksys_write+0x84/0x140 system_call_exception+0x124/0x230 system_call_vectored_common+0x15c/0x2ec Signed-off-by: Shawn Anastasio <[email protected]> Signed-off-by: Timothy Pearson <[email protected]> [bhelgaas: tidy comments] Signed-off-by: Bjorn Helgaas <[email protected]> Signed-off-by: Madhavan Srinivasan <[email protected]> Link: https://patch.msgid.link/2013845045.1359852.1752615367790.JavaMail.zimbra@raptorengineeringinc.com Signed-off-by: Sasha Levin <[email protected]>

commit 17ec2f9 upstream. Let the guest set DEBUGCTL.RTM_DEBUG if RTM is supported according to the guest CPUID model, as debug support is supposed to be available if RTM is supported, and there are no known downsides to letting the guest debug RTM aborts. Note, there are no known bug reports related to RTM_DEBUG, the primary motivation is to reduce the probability of breaking existing guests when a future change adds a missing consistency check on vmcs12.GUEST_DEBUGCTL (KVM currently lets L2 run with whatever hardware supports; whoops). Note gregkh#2, KVM already emulates DR6.RTM, and doesn't restrict access to DR7.RTM. Fixes: 83c5291 ("KVM: x86: expose Intel cpu new features (HLE, RTM) to guest") Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sean Christopherson <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 8b428f4 ] nbd grabs device lock nbd->config_lock for updating nr_hw_queues, this ways cause the following lock dependency: -> gregkh#2 (&disk->open_mutex){+.+.}-{4:4}: lock_acquire kernel/locking/lockdep.c:5871 [inline] lock_acquire+0x1ac/0x448 kernel/locking/lockdep.c:5828 __mutex_lock_common kernel/locking/mutex.c:602 [inline] __mutex_lock+0x166/0x1292 kernel/locking/mutex.c:747 mutex_lock_nested+0x14/0x1c kernel/locking/mutex.c:799 __del_gendisk+0x132/0xac6 block/genhd.c:706 del_gendisk+0xf6/0x19a block/genhd.c:819 nbd_dev_remove+0x3c/0xf2 drivers/block/nbd.c:268 nbd_dev_remove_work+0x1c/0x26 drivers/block/nbd.c:284 process_one_work+0x96a/0x1f32 kernel/workqueue.c:3238 process_scheduled_works kernel/workqueue.c:3321 [inline] worker_thread+0x5ce/0xde8 kernel/workqueue.c:3402 kthread+0x39c/0x7d4 kernel/kthread.c:464 ret_from_fork_kernel+0x2a/0xbb2 arch/riscv/kernel/process.c:214 ret_from_fork_kernel_asm+0x16/0x18 arch/riscv/kernel/entry.S:327 -> gregkh#1 (&set->update_nr_hwq_lock){++++}-{4:4}: lock_acquire kernel/locking/lockdep.c:5871 [inline] lock_acquire+0x1ac/0x448 kernel/locking/lockdep.c:5828 down_write+0x9c/0x19a kernel/locking/rwsem.c:1577 blk_mq_update_nr_hw_queues+0x3e/0xb86 block/blk-mq.c:5041 nbd_start_device+0x140/0xb2c drivers/block/nbd.c:1476 nbd_genl_connect+0xae0/0x1b24 drivers/block/nbd.c:2201 genl_family_rcv_msg_doit+0x206/0x2e6 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x514/0x78e net/netlink/genetlink.c:1210 netlink_rcv_skb+0x206/0x3be net/netlink/af_netlink.c:2534 genl_rcv+0x36/0x4c net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline] netlink_unicast+0x4f0/0x82c net/netlink/af_netlink.c:1339 netlink_sendmsg+0x85e/0xdd6 net/netlink/af_netlink.c:1883 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg+0xcc/0x160 net/socket.c:727 ____sys_sendmsg+0x63e/0x79c net/socket.c:2566 ___sys_sendmsg+0x144/0x1e6 net/socket.c:2620 __sys_sendmsg+0x188/0x246 net/socket.c:2652 __do_sys_sendmsg net/socket.c:2657 [inline] __se_sys_sendmsg net/socket.c:2655 [inline] __riscv_sys_sendmsg+0x70/0xa2 net/socket.c:2655 syscall_handler+0x94/0x118 arch/riscv/include/asm/syscall.h:112 do_trap_ecall_u+0x396/0x530 arch/riscv/kernel/traps.c:341 handle_exception+0x146/0x152 arch/riscv/kernel/entry.S:197 -> #0 (&nbd->config_lock){+.+.}-{4:4}: check_noncircular+0x132/0x146 kernel/locking/lockdep.c:2178 check_prev_add kernel/locking/lockdep.c:3168 [inline] check_prevs_add kernel/locking/lockdep.c:3287 [inline] validate_chain kernel/locking/lockdep.c:3911 [inline] __lock_acquire+0x12b2/0x24ea kernel/locking/lockdep.c:5240 lock_acquire kernel/locking/lockdep.c:5871 [inline] lock_acquire+0x1ac/0x448 kernel/locking/lockdep.c:5828 __mutex_lock_common kernel/locking/mutex.c:602 [inline] __mutex_lock+0x166/0x1292 kernel/locking/mutex.c:747 mutex_lock_nested+0x14/0x1c kernel/locking/mutex.c:799 refcount_dec_and_mutex_lock+0x60/0xd8 lib/refcount.c:118 nbd_config_put+0x3a/0x610 drivers/block/nbd.c:1423 nbd_release+0x94/0x15c drivers/block/nbd.c:1735 blkdev_put_whole+0xac/0xee block/bdev.c:721 bdev_release+0x3fe/0x600 block/bdev.c:1144 blkdev_release+0x1a/0x26 block/fops.c:684 __fput+0x382/0xa8c fs/file_table.c:465 ____fput+0x1c/0x26 fs/file_table.c:493 task_work_run+0x16a/0x25e kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop+0x118/0x134 kernel/entry/common.c:114 exit_to_user_mode_prepare include/linux/entry-common.h:330 [inline] syscall_exit_to_user_mode_work include/linux/entry-common.h:414 [inline] syscall_exit_to_user_mode include/linux/entry-common.h:449 [inline] do_trap_ecall_u+0x3f0/0x530 arch/riscv/kernel/traps.c:355 handle_exception+0x146/0x152 arch/riscv/kernel/entry.S:197 Also it isn't necessary to require nbd->config_lock, because blk_mq_update_nr_hw_queues() does grab tagset lock for sync everything. Fixes the issue by releasing ->config_lock & retry in case of concurrent updating nr_hw_queues. Fixes: 98e68f6 ("block: prevent adding/deleting disk during updating nr_hw_queues") Reported-by: [email protected] Closes: https://lore.kernel.org/all/[email protected] Reviewed-by: Yu Kuai <[email protected]> Cc: Nilay Shroff <[email protected]> Signed-off-by: Ming Lei <[email protected]> Reviewed-by: Nilay Shroff <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>