Spin up your batcher #1665
Spin up your batcher #1665
Conversation
✅ Deploy Preview for docs-optimism ready!
To edit notification comments on pull requests, go to your Netlify project configuration. |
📝 Walkthrough""" WalkthroughA new tutorial document titled "Spinning up the batcher" was added to the deployment section of chain operators. This document provides comprehensive instructions for setting up and configuring the OP Stack batcher ( Sequence Diagram(s)sequenceDiagram
participant Operator
participant Batcher
participant L2 Node
participant L1 Node
Operator->>Batcher: Configure and start batcher (via CLI or Docker)
Batcher->>L2 Node: Poll for new L2 transactions
Batcher->>L1 Node: Submit transaction batches to L1
Operator->>Batcher: Monitor status and logs
Batcher-->>Operator: Provide batcher RPC responses and status
Possibly related PRs
Suggested labels
Suggested reviewers
📜 Recent review detailsConfiguration used: .coderabbit.yaml 📒 Files selected for processing (5)
✅ Files skipped from review due to trivial changes (2)
🚧 Files skipped from review as they are similar to previous changes (1)
🧰 Additional context used📓 Path-based instructions (1)`**/*.mdx`: "ALWAYS review Markdown content THOROUGHLY with the following criter...
⚙️ Source: CodeRabbit Configuration File List of files the instruction was applied to:
🧠 Learnings (3)📓 Common learningspages/operators/chain-operators/deploy/spin-batcher.mdx (1)words.txt (1)🪛 LanguageToolpages/operators/chain-operators/deploy/spin-batcher.mdx[style] ~446-~446: Three successive sentences begin with the same word. Consider rewording the sentence or use a thesaurus to find a synonym. (ENGLISH_WORD_REPEAT_BEGINNING_RULE) words.txt[duplication] ~2-~2: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~11-~11: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~13-~13: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~21-~21: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~26-~26: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~28-~28: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~34-~34: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~40-~40: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~42-~42: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~45-~45: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~48-~48: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~50-~50: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~55-~55: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~59-~59: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~61-~61: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~79-~79: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~84-~84: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~88-~88: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~90-~90: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~95-~95: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~97-~97: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~101-~101: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~103-~103: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~111-~111: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~114-~114: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~116-~116: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~120-~120: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~122-~122: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~126-~126: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~129-~129: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~133-~133: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~146-~146: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~150-~150: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~152-~152: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~158-~158: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~161-~161: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~163-~163: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~165-~165: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~169-~169: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~172-~172: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~174-~174: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~177-~177: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~180-~180: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~184-~184: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~186-~186: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~198-~198: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~200-~200: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~202-~202: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~204-~204: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~206-~206: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~208-~208: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~214-~214: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~216-~216: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~222-~222: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~239-~239: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~241-~241: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~243-~243: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~246-~246: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~248-~248: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~250-~250: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~254-~254: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~256-~256: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~258-~258: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~260-~260: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~262-~262: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~266-~266: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~270-~270: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~278-~278: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~281-~281: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~284-~284: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~287-~287: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~295-~295: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~297-~297: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~301-~301: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~303-~303: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~306-~306: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~308-~308: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~311-~311: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~313-~313: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~317-~317: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~319-~319: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~325-~325: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~327-~327: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~330-~330: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~336-~336: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~339-~339: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~341-~341: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~343-~343: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~349-~349: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~352-~352: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~356-~356: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~360-~360: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~365-~365: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~369-~369: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~387-~387: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~399-~399: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~406-~406: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~408-~408: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~410-~410: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~439-~439: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~441-~441: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~445-~445: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~447-~447: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) [duplication] ~453-~453: Možný preklep: zopakovali ste slovo (WORD_REPEAT_RULE) 🔇 Additional comments (4)
Thanks for using CodeRabbit! It's free for OSS, and your support helps us grow. If you like it, consider giving us a shout-out. 🪧 TipsChatThere are 3 ways to chat with CodeRabbit:
SupportNeed help? Create a ticket on our support page for assistance with any issues or questions. Note: Be mindful of the bot's finite context window. It's strongly recommended to break down tasks such as reading entire modules into smaller chunks. For a focused discussion, use review comments to chat about specific files and their changes, instead of using the PR comments. CodeRabbit Commands (Invoked using PR comments)
Other keywords and placeholders
Documentation and Community
|
![coderabbitai[bot]](https://avatars.githubusercontent.com/in/347564?s=60&v=4){kind=small}
There was a problem hiding this comment.
Actionable comments posted: 2
🧹 Nitpick comments (16)
pages/operators/chain-operators/deploy/_meta.json (1)
5-6: Metadata ordering consistency.
The new"spin-batcher": "Spinning up the batcher"entry integrates the batcher guide into the deployment index. Confirm that entries in_meta.jsonfollow the repository’s ordering convention (alphabetical or logical) to avoid merge conflicts.pages/operators/chain-operators/deploy/spin-batcher.mdx (15)
21-24: Introduction tone.
The H1 and opening paragraph are clear. For stricter imperative style, you could rephrase to “After spinning up your sequencer and proposer, configure the batcher…” but the current wording is acceptable.
38-51: Prerequisites completeness.
The sections for running infrastructure and network information are comprehensive. Consider uniform formatting for sub-sections (bold vs. plain text) for consistency across guides.
68-83: Note missingjustdependency.
The build steps invokejust, but there’s no prerequisite listed to install this tool. Add a brief note (e.g.,brew install justor reference its docs) to avoid build failures.
93-93: Header sentence-case consistency.
In the header### Docker alternative (For containerized environments), lowercase the parenthetical “For” for sentence case:-### Docker alternative (For containerized environments) +### Docker alternative (for containerized environments)
102-118: Docker setup Step 1 clarity.
Copyingstate.jsonand extracting the BatchInbox address is clear. Consider noting thatjqmust be installed to run the extraction command.
120-149: .env creation guidance.
Environment variables are well grouped. You may improve readability by adding section headers inside the.env(e.g.,# L1 RPC,# L2 RPC).
222-230: Directory structure diagram.
The tree view accurately represents the final layout. Consider noting volume mounts or permissions caveats if relevant to non-Linux hosts.
232-235: Callout tone.
For a more formal style, you could replace the contraction “you’re” with “you are”:-This guide assumes you're using the **build-from-source** approach. +This guide assumes you are using the **build-from-source** approach.
268-283: BatchInbox address extraction.
Thejqcommand is used correctly. Optionally, add anif [ ! -f state.json ]check to fail fast if the file is missing.
322-328: Private key handling.
The warning about ETH funding is crucial. Consider adding a link to best practices for key management.
334-358: Batcher launch script robustness.
The script sources variables correctly. To improve reliability, addset -euo pipefailat the top to exit on errors and undefined variables.
360-368: Parameter descriptions.
Descriptions are clear. You might mention default values for key flags to help users compare configuration changes.
370-414: Startup procedure clarity.
The multi-step instructions for connectivity checks, permission changes, and script execution are well ordered. Consider reminding users to export environment variables in their session before running the tests.
416-438: Post-deployment verification.
RPC methods and ETH balance checks cover core validation. Optionally, suggest a brief wait-and-retry approach for initial batch submissions.
444-450: Next steps repetition.
The “Next steps” bullets all start with “For”. Vary the openings (e.g., “Refer to”, “Check”, “Use”) to improve readability.
📜 Review details
Configuration used: .coderabbit.yaml
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (2)
pages/operators/chain-operators/deploy/_meta.json(1 hunks)pages/operators/chain-operators/deploy/spin-batcher.mdx(1 hunks)
🧰 Additional context used
📓 Path-based instructions (1)
`**/*.mdx`: "ALWAYS review Markdown content THOROUGHLY with the following criteria: - First, check the frontmatter section at the top of the file: 1. For regular pages, ensure AL...
**/*.mdx: "ALWAYS review Markdown content THOROUGHLY with the following criteria:
- First, check the frontmatter section at the top of the file:
- For regular pages, ensure ALL these fields are present and not empty:
--- title: [non-empty] lang: [non-empty] description: [non-empty] topic: [non-empty] personas: [non-empty array] categories: [non-empty array] content_type: [valid type] ---
- For landing pages (index.mdx or files with ), only these fields are required:
--- title: [non-empty] lang: [non-empty] description: [non-empty] topic: [non-empty] ---
- If any required fields are missing or empty, comment:
'This file appears to be missing required metadata. Please check keywords.config.yaml for valid options and add the required fields manually. You can validate your changes by running:pnpm validate-metadata ```'- Use proper nouns in place of personal pronouns like 'We' and 'Our' to maintain consistency in communal documentation.
- Avoid gender-specific language and use the imperative form.
- Monitor capitalization for emphasis. Avoid using all caps, italics, or bold for emphasis.
- Ensure proper nouns are capitalized in sentences.
- Apply the Oxford comma.
- Use proper title case for buttons, tab names, page names, and links. Sentence case should be used for body content and short phrases, even in links.
- Use correct spelling and grammar at all times (IMPORTANT).
- For H1, H2, and H3 headers:
- Use sentence case, capitalizing only the first word.
- Preserve the capitalization of proper nouns, technical terms, and acronyms as defined in the 'nouns.txt' file located in the root directory of the project.
- Do not automatically lowercase words that appear in the 'nouns.txt' file, regardless of their position in the header.
- Flag any headers that seem to inconsistently apply these rules for manual review.
- When reviewing capitalization, always refer to the 'nouns.txt' file for the correct capitalization of proper nouns and technical terms specific to the project.
"
pages/operators/chain-operators/deploy/spin-batcher.mdx
🪛 LanguageTool
pages/operators/chain-operators/deploy/spin-batcher.mdx
[uncategorized] ~362-~362: Loose punctuation mark.
Context: ...ers explained * --poll-interval: How frequently the batcher checks for n...
(UNLIKELY_OPENING_PUNCTUATION)
[style] ~448-~448: Three successive sentences begin with the same word. Consider rewording the sentence or use a thesaurus to find a synonym.
Context: ...-operators/tools/chain-monitoring). * For cost optimization strategies, refer to ...
(ENGLISH_WORD_REPEAT_BEGINNING_RULE)
⏰ Context from checks skipped due to timeout of 90000ms (3)
- GitHub Check: Redirect rules - docs-optimism
- GitHub Check: Header rules - docs-optimism
- GitHub Check: Pages changed - docs-optimism
🔇 Additional comments (14)
pages/operators/chain-operators/deploy/spin-batcher.mdx (14)
1-17: Validate frontmatter fields.
All required metadata (title,lang,description,content_type,topic,personas,categories) are present and non-empty. Verify thattopic: batcher-setupmatches existing taxonomy and thatis_imported_content: 'false'is intentional.
19-20: Check Nextra component imports.
Imports forCalloutandStepslook correct. Ensure both are used downstream; remove any unused imports to keep dependencies minimal.
27-35: Understanding the batcher's role.
The sentence-case header and bullet items are accurate and adhere to style rules. No changes needed.
36-37: Function summary clarity.
This standalone description effectively summarizes the batcher’s purpose. It aligns with documentation guidelines.
53-60: Software installation headings.
Headers follow sentence case and the link to the releases page is correct. Instructions are clear.
61-64: Version compatibility callout.
Callout clearly highlights theop-batcher/v1.13.1compatibility. No action required.
85-91: Installation verification.
The--versioncheck is correct. Optionally, remind users to verify the printed version matches the tag they checked out.
197-205: Starting Docker service.
Network creation anddocker-compose upcommands are accurate and straightforward.
209-220: Container verification steps.
RPC checks anddocker-compose pscommands effectively validate the batcher container.
237-248: Configuration headings consistency.
The numbered subheading clearly distinguishes steps. Ensure this numbering style matches other operator guides.
252-262: Workspace layout.
The bash-style tree helps readers visualize directories. No changes needed.
285-287: BatchInbox callout accuracy.
The info callout correctly explains the role of the BatchInbox contract.
289-318: Environment variable setup.
The.envsection is comprehensive and context-aware. Values forlocalhostvs. container hostnames are appropriate.
440-443: Additional resource callout.
Linking to the fee calculation tool is helpful. No changes needed.
Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com>
There was a problem hiding this comment.
Actionable comments posted: 0
♻️ Duplicate comments (2)
pages/operators/chain-operators/deploy/spin-batcher.mdx (2)
25-25: Replace placeholder link.
The link[sequencer guide](add this later)is still a placeholder. Update it to the actual sequencer guide URL to avoid broken navigation.
159-185: Fix YAML indentation in the Docker snippet.
Thedocker-compose.ymlsnippet shows only service properties without the top‐levelservices:andop-batcher:keys. Nest all these settings under:services: op-batcher: volumes: - .:/workspace # ...
🧹 Nitpick comments (2)
pages/operators/chain-operators/deploy/spin-batcher.mdx (2)
308-310: Avoid all caps for emphasis.
In the sentence “Replace ALL placeholder values…”, changeALLto lowercase (all) to comply with style guidelines.
436-439: Avoid repetitive bullet intros.
Three successive list items start with “For”. Consider rephrasing one or more to improve readability, e.g., “Check cost optimization strategies…” instead of “For cost optimization strategies…”.
📜 Review details
Configuration used: .coderabbit.yaml
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (1)
pages/operators/chain-operators/deploy/spin-batcher.mdx(1 hunks)
🧰 Additional context used
📓 Path-based instructions (1)
`**/*.mdx`: "ALWAYS review Markdown content THOROUGHLY with the following criteria: - First, check the frontmatter section at the top of the file: 1. For regular pages, ensure AL...
**/*.mdx: "ALWAYS review Markdown content THOROUGHLY with the following criteria:
- First, check the frontmatter section at the top of the file:
- For regular pages, ensure ALL these fields are present and not empty:
--- title: [non-empty] lang: [non-empty] description: [non-empty] topic: [non-empty] personas: [non-empty array] categories: [non-empty array] content_type: [valid type] ---
- For landing pages (index.mdx or files with ), only these fields are required:
--- title: [non-empty] lang: [non-empty] description: [non-empty] topic: [non-empty] ---
- If any required fields are missing or empty, comment:
'This file appears to be missing required metadata. Please check keywords.config.yaml for valid options and add the required fields manually. You can validate your changes by running:pnpm validate-metadata ```'- Use proper nouns in place of personal pronouns like 'We' and 'Our' to maintain consistency in communal documentation.
- Avoid gender-specific language and use the imperative form.
- Monitor capitalization for emphasis. Avoid using all caps, italics, or bold for emphasis.
- Ensure proper nouns are capitalized in sentences.
- Apply the Oxford comma.
- Use proper title case for buttons, tab names, page names, and links. Sentence case should be used for body content and short phrases, even in links.
- Use correct spelling and grammar at all times (IMPORTANT).
- For H1, H2, and H3 headers:
- Use sentence case, capitalizing only the first word.
- Preserve the capitalization of proper nouns, technical terms, and acronyms as defined in the 'nouns.txt' file located in the root directory of the project.
- Do not automatically lowercase words that appear in the 'nouns.txt' file, regardless of their position in the header.
- Flag any headers that seem to inconsistently apply these rules for manual review.
- When reviewing capitalization, always refer to the 'nouns.txt' file for the correct capitalization of proper nouns and technical terms specific to the project.
"
pages/operators/chain-operators/deploy/spin-batcher.mdx
🪛 LanguageTool
pages/operators/chain-operators/deploy/spin-batcher.mdx
[uncategorized] ~352-~352: Loose punctuation mark.
Context: ...ers explained * --poll-interval: How frequently the batcher checks for n...
(UNLIKELY_OPENING_PUNCTUATION)
[style] ~438-~438: Three successive sentences begin with the same word. Consider rewording the sentence or use a thesaurus to find a synonym.
Context: ...-operators/tools/chain-monitoring). * For cost optimization strategies, refer to ...
(ENGLISH_WORD_REPEAT_BEGINNING_RULE)
⏰ Context from checks skipped due to timeout of 90000ms (4)
- GitHub Check: Redirect rules - docs-optimism
- GitHub Check: Header rules - docs-optimism
- GitHub Check: Pages changed - docs-optimism
- GitHub Check: pr-workflow
🔇 Additional comments (1)
pages/operators/chain-operators/deploy/spin-batcher.mdx (1)
1-17: Frontmatter metadata is complete and valid.
All required fields (title,lang,description,topic,personas,categories, andcontent_type) are present and correctly populated.
There was a problem hiding this comment.
Actionable comments posted: 2
♻️ Duplicate comments (1)
pages/operators/chain-operators/deploy/spin-batcher.mdx (1)
25-26: Replace placeholder sequencer guide link
The link[sequencer guide](add this later)is still a placeholder and needs the final URL before merging.
📜 Review details
Configuration used: .coderabbit.yaml
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (2)
pages/operators/chain-operators/deploy.mdx(1 hunks)pages/operators/chain-operators/deploy/spin-batcher.mdx(1 hunks)
✅ Files skipped from review due to trivial changes (1)
- pages/operators/chain-operators/deploy.mdx
🧰 Additional context used
📓 Path-based instructions (1)
`**/*.mdx`: "ALWAYS review Markdown content THOROUGHLY with the following criteria: - First, check the frontmatter section at the top of the file: 1. For regular pages, ensure AL...
**/*.mdx: "ALWAYS review Markdown content THOROUGHLY with the following criteria:
- First, check the frontmatter section at the top of the file:
- For regular pages, ensure ALL these fields are present and not empty:
--- title: [non-empty] lang: [non-empty] description: [non-empty] topic: [non-empty] personas: [non-empty array] categories: [non-empty array] content_type: [valid type] ---
- For landing pages (index.mdx or files with ), only these fields are required:
--- title: [non-empty] lang: [non-empty] description: [non-empty] topic: [non-empty] ---
- If any required fields are missing or empty, comment:
'This file appears to be missing required metadata. Please check keywords.config.yaml for valid options and add the required fields manually. You can validate your changes by running:pnpm validate-metadata ```'- Use proper nouns in place of personal pronouns like 'We' and 'Our' to maintain consistency in communal documentation.
- Avoid gender-specific language and use the imperative form.
- Monitor capitalization for emphasis. Avoid using all caps, italics, or bold for emphasis.
- Ensure proper nouns are capitalized in sentences.
- Apply the Oxford comma.
- Use proper title case for buttons, tab names, page names, and links. Sentence case should be used for body content and short phrases, even in links.
- Use correct spelling and grammar at all times (IMPORTANT).
- For H1, H2, and H3 headers:
- Use sentence case, capitalizing only the first word.
- Preserve the capitalization of proper nouns, technical terms, and acronyms as defined in the 'nouns.txt' file located in the root directory of the project.
- Do not automatically lowercase words that appear in the 'nouns.txt' file, regardless of their position in the header.
- Flag any headers that seem to inconsistently apply these rules for manual review.
- When reviewing capitalization, always refer to the 'nouns.txt' file for the correct capitalization of proper nouns and technical terms specific to the project.
"
pages/operators/chain-operators/deploy/spin-batcher.mdx
🪛 LanguageTool
pages/operators/chain-operators/deploy/spin-batcher.mdx
[uncategorized] ~354-~354: Loose punctuation mark.
Context: ...ers explained * --poll-interval: How frequently the batcher checks for n...
(UNLIKELY_OPENING_PUNCTUATION)
[style] ~440-~440: Three successive sentences begin with the same word. Consider rewording the sentence or use a thesaurus to find a synonym.
Context: ...-operators/tools/chain-monitoring). * For cost optimization strategies, refer to ...
(ENGLISH_WORD_REPEAT_BEGINNING_RULE)
⏰ Context from checks skipped due to timeout of 90000ms (4)
- GitHub Check: Redirect rules - docs-optimism
- GitHub Check: Header rules - docs-optimism
- GitHub Check: Pages changed - docs-optimism
- GitHub Check: pr-workflow
Co-authored-by: Bradley Camacho <[email protected]>
Co-authored-by: Bradley Camacho <[email protected]>
Sequencer node
There was a problem hiding this comment.
Actionable comments posted: 1
♻️ Duplicate comments (1)
pages/operators/chain-operators/deploy/spin-batcher.mdx (1)
23-26: Placeholder links still present
[sequencer](Add link later)and[sequencer guide](add this later)remain. Replace with the actual sequencer-setup URL before publishing.
🧹 Nitpick comments (5)
pages/app-developers/tutorials/bridging/standard-bridge-standard-token.mdx (3)
29-31: Avoid bold for emphasis in calloutsStyle guide discourages bold for emphasis. Drop the
**formatting to stay consistent.- The Standard Bridge **does not** support ... + The Standard Bridge does not support ...
68-74: Tighten wording and remove “in order to”“In order to” is verbose; plain “to” is clearer. Same pattern appears in multiple steps.
-You'll need a private key in order to sign transactions. +You'll need a private key to sign transactions.Apply the same change to the RPC-URL and token-address steps.
Also applies to: 78-83
111-112: Escape characters no longer required
&is already safe inside Markdown links; the back-slash renders literally in most MDX renderers. Remove it so the URL works.-[Superchain Bridges UI](https://app.optimism.io/bridge?utm_source=op-docs\&utm_medium=docs) +[Superchain Bridges UI](https://app.optimism.io/bridge?utm_source=op-docs&utm_medium=docs)pages/operators/chain-operators/deploy/spin-batcher.mdx (2)
44-46: Grammatical articleUse “an” before an acronym that starts with a vowel sound.
-* Access to a L1 RPC endpoint +* Access to an L1 RPC endpoint
160-168: YAML header spacingThere is a blank line between
version:andservices:. While Docker ignores it, removing the blank line keeps examples consistently formatted.version: '3.8' - services:
📜 Review details
Configuration used: .coderabbit.yaml
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (7)
.github/ISSUE_TEMPLATE/suggest_faq_item.yaml(1 hunks).github/ISSUE_TEMPLATE/suggest_troubleshooting_item.yaml(1 hunks).github/ISSUE_TEMPLATE/suggest_tutorial.yaml(1 hunks)pages/app-developers/tutorials/bridging/standard-bridge-custom-token.mdx(2 hunks)pages/app-developers/tutorials/bridging/standard-bridge-standard-token.mdx(4 hunks)pages/notices/upgrade-14.mdx(1 hunks)pages/operators/chain-operators/deploy/spin-batcher.mdx(1 hunks)
✅ Files skipped from review due to trivial changes (4)
- .github/ISSUE_TEMPLATE/suggest_troubleshooting_item.yaml
- pages/app-developers/tutorials/bridging/standard-bridge-custom-token.mdx
- .github/ISSUE_TEMPLATE/suggest_tutorial.yaml
- .github/ISSUE_TEMPLATE/suggest_faq_item.yaml
🧰 Additional context used
📓 Path-based instructions (1)
`**/*.mdx`: "ALWAYS review Markdown content THOROUGHLY with the following criter...
**/*.mdx: "ALWAYS review Markdown content THOROUGHLY with the following criteria:
- First, check the frontmatter section at the top of the file:
- For regular pages, ensure ALL these fields are present and not empty:
--- title: [non-empty] lang: [non-empty] description: [non-empty] topic: [non-empty] personas: [non-empty array] categories: [non-empty array] content_type: [valid type] ---
- For landing pages (index.mdx or files with ), only these fields are required:
--- title: [non-empty] lang: [non-empty] description: [non-empty] topic: [non-empty] ---
- If any required fields are missing or empty, comment:
'This file appears to be missing required metadata. Please check keywords.config.yaml for valid options and add the required fields manually. You can validate your changes by running:pnpm validate-metadata ```'- Use proper nouns in place of personal pronouns like 'We' and 'Our' to maintain consistency in communal documentation.
- Avoid gender-specific language and use the imperative form.
- Monitor capitalization for emphasis. Avoid using all caps, italics, or bold for emphasis.
- Ensure proper nouns are capitalized in sentences.
- Apply the Oxford comma.
- Use proper title case for buttons, tab names, page names, and links. Sentence case should be used for body content and short phrases, even in links.
- Use correct spelling and grammar at all times (IMPORTANT).
- For H1, H2, and H3 headers:
- Use sentence case, capitalizing only the first word.
- Preserve the capitalization of proper nouns, technical terms, and acronyms as defined in the 'nouns.txt' file located in the root directory of the project.
- Do not automatically lowercase words that appear in the 'nouns.txt' file, regardless of their position in the header.
- Flag any headers that seem to inconsistently apply these rules for manual review.
- When reviewing capitalization, always refer to the 'nouns.txt' file for the correct capitalization of proper nouns and technical terms specific to the project.
"
⚙️ Source: CodeRabbit Configuration File
List of files the instruction was applied to:
pages/operators/chain-operators/deploy/spin-batcher.mdxpages/app-developers/tutorials/bridging/standard-bridge-standard-token.mdxpages/notices/upgrade-14.mdx
🧠 Learnings (4)
📓 Common learnings
Learnt from: sbvegan
PR: ethereum-optimism/docs#1001
File: pages/builders.mdx:11-12
Timestamp: 2024-10-22T02:58:02.175Z
Learning: Prefer using 'OP Stack' over 'OP Mainnet' in documentation for consistency.
Learnt from: qbzzt
PR: ethereum-optimism/docs#1613
File: public/tutorials/attest.mjs:64-71
Timestamp: 2025-05-24T18:24:46.628Z
Learning: For tutorial and educational code in the ethereum-optimism/docs repository, prioritize simplicity and clarity over production-level robustness. Hardcoded values and simplified error handling are acceptable when they help demonstrate core concepts without unnecessary complexity.
pages/operators/chain-operators/deploy/spin-batcher.mdx (1)
Learnt from: sbvegan
PR: ethereum-optimism/docs#1001
File: pages/builders.mdx:11-12
Timestamp: 2024-10-22T02:58:02.175Z
Learning: Prefer using 'OP Stack' over 'OP Mainnet' in documentation for consistency.
pages/app-developers/tutorials/bridging/standard-bridge-standard-token.mdx (9)
Learnt from: qbzzt
PR: ethereum-optimism/docs#1525
File: pages/stack/interop/tutorials/upgrade-to-superchain-erc20.mdx:500-503
Timestamp: 2025-04-03T01:38:08.988Z
Learning: Private keys in the "Upgrading ERC20 to SuperchainERC20" tutorial document are test/demo keys intentionally included for educational purposes and do not represent security concerns.
Learnt from: qbzzt
PR: ethereum-optimism/docs#1390
File: public/tutorials/CustomSuperchainToken.sol:32-38
Timestamp: 2025-02-20T16:55:42.917Z
Learning: In tutorial and example code for the ethereum-optimism/docs repository, prioritize code clarity and simplicity over additional security measures or optimizations, unless they are specifically part of the learning objectives.
Learnt from: qbzzt
PR: ethereum-optimism/docs#1613
File: public/tutorials/attest.mjs:64-71
Timestamp: 2025-05-24T18:24:46.628Z
Learning: For tutorial and educational code in the ethereum-optimism/docs repository, prioritize simplicity and clarity over production-level robustness. Hardcoded values and simplified error handling are acceptable when they help demonstrate core concepts without unnecessary complexity.
Learnt from: qbzzt
PR: ethereum-optimism/docs#1613
File: public/tutorials/verify-attestation.mjs:47-47
Timestamp: 2025-05-24T18:26:40.321Z
Learning: In tutorial files, commented lines that appear to modify or corrupt data (such as changing event topics) may be intentional educational tools for demonstrating failure scenarios or sanity checks, rather than leftover debug code that should be removed.
Learnt from: qbzzt
PR: ethereum-optimism/docs#1334
File: pages/stack/interop/tutorials/message-passing.mdx:75-83
Timestamp: 2025-02-10T16:26:24.797Z
Learning: In tutorial documentation, it is acceptable to include well-known test private keys (like Hardhat/Anvil's default keys) as they are specifically meant for testing and development purposes.
Learnt from: qbzzt
PR: ethereum-optimism/docs#1216
File: pages/stack/interop/security.mdx:136-144
Timestamp: 2025-01-08T11:04:45.361Z
Learning: In the ethereum-optimism/docs repository, sections that are commented out in documentation files are intentionally excluded due to accuracy concerns and should not be suggested for inclusion until the information becomes accurate.
Learnt from: qbzzt
PR: ethereum-optimism/docs#1334
File: pages/stack/interop/tutorials/message-passing.mdx:74-83
Timestamp: 2025-02-10T16:28:56.201Z
Learning: The private key starting with `0xac0974...` and address `0xf39Fd6...` are standard testing credentials used by Anvil/Hardhat for local development environments. These are intentionally public and safe to include in documentation for local development tutorials.
Learnt from: qbzzt
PR: ethereum-optimism/docs#1589
File: public/tutorials/setup-for-manual-relay.sh:7-11
Timestamp: 2025-05-07T15:33:50.150Z
Learning: Hardcoded private keys are acceptable in educational scripts and tutorials when they are well-known test keys (like Hardhat's default private key 0xac0974bec39a17e36ba4a6b4d238ff944bacb478cbed5efcae784d7bf4f2ff80) used only in local development environments.
Learnt from: sbvegan
PR: ethereum-optimism/docs#1001
File: pages/builders.mdx:11-12
Timestamp: 2024-10-22T02:58:02.175Z
Learning: Prefer using 'OP Stack' over 'OP Mainnet' in documentation for consistency.
pages/notices/upgrade-14.mdx (1)
Learnt from: qbzzt
PR: ethereum-optimism/docs#1216
File: pages/stack/interop/security.mdx:136-144
Timestamp: 2025-01-08T11:04:45.361Z
Learning: In the ethereum-optimism/docs repository, sections that are commented out in documentation files are intentionally excluded due to accuracy concerns and should not be suggested for inclusion until the information becomes accurate.
🪛 LanguageTool
pages/operators/chain-operators/deploy/spin-batcher.mdx
[grammar] ~19-~19: Use correct spacing
Context: ...se' --- import { Callout, Steps } from 'nextra/components' # Spinning up the batcher After you have...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~21-~21: Use correct spacing
Context: ... 'nextra/components' # Spinning up the batcher After you have spun up your [sequencer...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~23-~23: Use correct spacing
Context: ...and enables users to reconstruct the L2 state. This guide assumes you already have a f...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~25-~25: Use correct spacing
Context: ...the [sequencer guide](add this later) first. ## Understanding the batcher's role The b...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~27-~27: Use correct spacing
Context: ... first. ## Understanding the batcher's role The batcher (op-batcher) serves as a ...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~29-~29: Use correct spacing
Context: ...ata to L1. Its primary responsibilities include: * Batch submission: Collecting L2 trans...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~34-~34: Use correct spacing
Context: ...a channels for optimal batch submission timing The batcher reads transaction data from...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~36-~36: There might be a problem here.
Context: ...batches to the BatchInbox contract on L1. ## Prerequisites Before setting up your batcher, ensure ...
(QB_NEW_EN_MERGED_MATCH)
[grammar] ~40-~40: Use correct spacing
Context: ...ore setting up your batcher, ensure you have: Running infrastructure: * An opera...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~42-~42: Use correct spacing
Context: ...ur batcher, ensure you have: Running infrastructure: * An operational sequencer node * Acces...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~45-~45: Use articles correctly
Context: ...perational sequencer node * Access to a L1 RPC endpoint Network information: ...
(QB_NEW_EN_OTHER_ERROR_IDS_11)
[grammar] ~45-~45: Use correct spacing
Context: ...l sequencer node * Access to a L1 RPC endpoint Network information: * Your L2 cha...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~47-~47: Use correct spacing
Context: ... Access to a L1 RPC endpoint Network information: * Your L2 chain ID and network configurat...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~50-~50:
Context: ...etwork details (chain ID, RPC endpoints) * BatchInbox contract address from your deployment ## Softwa...
(QB_NEW_EN_OTHER_ERROR_IDS_)
[grammar] ~51-~51: Use correct spacing
Context: ...BatchInbox contract address from your deployment ## Software installation ### Finding the ...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~53-~53: Use correct spacing
Context: ...dress from your deployment ## Software installation ### Finding the current stable releases To...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~55-~55: Use correct spacing
Context: ...llation ### Finding the current stable releases To ensure you're using the latest compa...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~57-~57: Use correct spacing
Context: ...ts, always check the official releases page. Look for the latest op-batcher/v* rel...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~59-~59: Use correct spacing
Context: ...e that's compatible with your sequencer setup. This guide uses op-batcher/v1.13.1 which is compatible with op-node/v1.13.3 and op-geth/v1.101511.0 from the sequencer setup. Always check the release notes for compatibility information. ### Build from source Clone and build op-b...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~66-~66: There might be a mistake here.
Context: ...information. ### Build from source Clone and build op-batcher: ```bash # ...
(QB_NEW_EN_OTHER)
[grammar] ~68-~68: Use correct spacing
Context: ... ### Build from source Clone and build op-batcher: bash # If you don't already have the optimism repository from the sequencer setup git clone https://github.com/ethereum-optimism/optimism.git cd optimism # Checkout the latest release tag git checkout op-batcher/v1.13.1 # Build op-batcher cd op-batcher just # Binary will be available at ./bin/op-batcher ### Verify installation Run this command t...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~85-~85: There might be a mistake here.
Context: ...ble at ./bin/op-batcher ``` ### Verify installation Run this command to verify the installa...
(QB_NEW_EN_OTHER)
[grammar] ~87-~87: Use correct spacing
Context: ...llation Run this command to verify the installation: bash ./bin/op-batcher --version ### Docker alternative (For containerized e...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~93-~93: Use correct spacing
Context: ...# Docker alternative (For containerized environments) If you prefer containerized deployment,...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~95-~95: Use correct spacing
Context: ...oyment, you can use the official Docker images. ### Complete Docker setup guide
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~97-~97: Use correct spacing
Context: ...cker images. ### Complete Docker setup guide
Complete Docker setup guide
If you choose the Docker approach, you'...(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~102-~102: Use correct spacing
Context: ...choose the Docker approach, you'll need to: 1. **Set up directory structure and copy con...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~104-~104: Use correct spacing
Context: ...ectory structure and copy configuration files:** bash # Create your batcher working directory mkdir ~/batcher-node cd ~/batcher-node # Copy configuration files from op-deployer output # Note: Adjust the path if your .deployer directory is located elsewhere cp ~/.deployer/state.json . # Extract the BatchInbox address BATCH_INBOX_ADDRESS=$(cat state.json | jq -r '.opChainDeployments[0].systemConfigProxyAddress') echo "BatchInbox Address: $BATCH_INBOX_ADDRESS" 2. Create environment variables file: ...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~120-~120: Use articles correctly
Context: ...CH_INBOX_ADDRESS" 2. **Create environment variables file:** bash # Create...
(QB_NEW_EN_OTHER_ERROR_IDS_11)
[grammar] ~120-~120: Use correct spacing
Context: ...` 2. Create environment variables file: bash # Create .env file with your actual values cat > .env << 'EOF' # L1 Configuration - Replace with your actual RPC URLs L1_RPC_URL=https://sepolia.infura.io/v3/YOUR_ACTUAL_INFURA_KEY # L2 Configuration - Should match your sequencer setup L2_RPC_URL=http://sequencer-node:8545 ROLLUP_RPC_URL=http://sequencer-node:8547 # Contract addresses - Extract from your op-deployer output BATCH_INBOX_ADDRESS=YOUR_ACTUAL_BATCH_INBOX_ADDRESS # Private key - Replace with your actual private key BATCHER_PRIVATE_KEY=0xYOUR_ACTUAL_PRIVATE_KEY # Batcher configuration POLL_INTERVAL=1s SUB_SAFETY_MARGIN=6 NUM_CONFIRMATIONS=1 SAFE_ABORT_NONCE_TOO_LOW_COUNT=3 RESUBMISSION_TIMEOUT=30s MAX_CHANNEL_DURATION=25 # RPC configuration BATCHER_RPC_PORT=8548 EOF Important: Replace ALL placeholder va...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~151-~151: Use correct spacing
Context: ...ACTUAL_*`) with your real configuration values. 3. Create docker-compose.yml: <Callou...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~153-~153: Use correct spacing
Context: ...l configuration values. 3. Create docker-compose.yml: This configuration assumes your sequencer is running in a Docker container named sequencer-node on the same op-stack network. Make sure your sequencer is running before starting the batcher. yaml version: '3.8' services: op-batcher: image: us-docker.pkg.dev/oplabs-tools-artifacts/images/op-batcher:v1.13.1 volumes: - .:/workspace working_dir: /workspace ports: - "8548:8548" env_file: - .env command: - "op-batcher" - "--l2-eth-rpc=${L2_RPC_URL}" - "--rollup-rpc=${ROLLUP_RPC_URL}" - "--poll-interval=${POLL_INTERVAL}" - "--sub-safety-margin=${SUB_SAFETY_MARGIN}" - "--num-confirmations=${NUM_CONFIRMATIONS}" - "--safe-abort-nonce-too-low-count=${SAFE_ABORT_NONCE_TOO_LOW_COUNT}" - "--resubmission-timeout=${RESUBMISSION_TIMEOUT}" - "--rpc.addr=0.0.0.0" - "--rpc.port=${BATCHER_RPC_PORT}" - "--rpc.enable-admin" - "--max-channel-duration=${MAX_CHANNEL_DURATION}" - "--l1-eth-rpc=${L1_RPC_URL}" - "--private-key=${BATCHER_PRIVATE_KEY}" - "--batch-type=1" - "--data-availability-type=blobs" - "--compress" - "--log.level=info" restart: unless-stopped 4. Start the batcher service: ```bash...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~195-~195: Use correct spacing
Context: ...topped 4. **Start the batcher service:** bash # Make sure your sequencer network exists docker network create op-stack 2>/dev/null || true # Start the batcher docker-compose up -d # View logs docker-compose logs -f op-batcher ```` 5. Verify batcher is running: ```bash...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~208-~208: Use correct spacing
Context: ...tcher ```` 5. Verify batcher is running: bash # Check batcher RPC is responding curl -X POST -H "Content-Type: application/json" \ --data '{"jsonrpc":"2.0","method":"admin_startBatcher","params":[],"id":1}' \ http://localhost:8548 # Check container status docker-compose ps 6. Final directory structure: ```bash...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~220-~220: Use correct spacing
Context: ...mpose ps 6. **Final directory structure:** bash ~/batcher-node/ ├── state.json # Copied from ~/.deployer/ ├── .env # Environment variables └── docker-compose.yml # Docker configuration ```
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~235-~235: Use correct spacing
Context: ...e section. ## Configuration setup ### 1. Organize your workspace Create your...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~237-~237: There might be a mistake here.
Context: ...nfiguration setup ### 1. Organize your workspace Create your batcher working directory: ...
(QB_NEW_EN_OTHER)
[grammar] ~239-~239: Use correct spacing
Context: ... workspace Create your batcher working directory: bash # Create batcher directory at the same level as your sequencer mkdir batcher-node cd batcher-node # Create scripts directory mkdir scripts Your final directory structure should l...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~250-~250: There might be a problem here.
Context: ...r final directory structure should look like: bash ~/ ├── optimism/ # Contains op-batcher binary ├── sequencer-node/ # Your sequencer setup ├── proposer-node/ # Your proposer setup ├── .deployer/ # From op-deployer │ └── state.json └── batcher-node/ # Your batcher working directory ├── state.json # Copied from .deployer ├── .env └── scripts/ └── start-batcher.sh ### 2. Extract BatchInbox address Extract ...
(QB_NEW_EN_MERGED_MATCH)
[grammar] ~266-~266: There might be a mistake here.
Context: ...tcher.sh ``` ### 2. Extract BatchInbox address Extract the BatchInbox contract addre...
(QB_NEW_EN_OTHER)
[grammar] ~268-~268: Use correct spacing
Context: ... contract address from your op-deployer output: bash # Navigate to batcher directory cd ~/batcher-node # Copy the deployment state file from op-deployer # Update the path if your .deployer directory is located elsewhere cp ../.deployer/state.json . # Extract the BatchInbox address BATCH_INBOX_ADDRESS=$(cat state.json | jq -r '.opChainDeployments[0].systemConfigProxyAddress') echo "BatchInbox Address: $BATCH_INBOX_ADDRESS" The batcher submits transaction batches to the BatchInbox contract on L1. This contract is responsible for accepting and storing L2 transaction data. ### 3. Set up environment variables Create...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~287-~287: There might be a mistake here.
Context: .... ### 3. Set up environment variables Create your .env file with the actual...
(QB_NEW_EN_OTHER)
[grammar] ~289-~289: Use correct spacing
Context: ...Create your .env file with the actual values: bash # Create .env file with your actual values # L1 Configuration - Replace with your actual RPC URL L1_RPC_URL=https://sepolia.infura.io/v3/YOUR_ACTUAL_INFURA_KEY # L2 Configuration - Should match your sequencer setup L2_RPC_URL=http://localhost:8545 ROLLUP_RPC_URL=http://localhost:8547 # Contract addresses - Extract from your op-deployer output BATCH_INBOX_ADDRESS=YOUR_ACTUAL_BATCH_INBOX_ADDRESS # Private key - Replace with your actual private key BATCHER_PRIVATE_KEY=0xYOUR_ACTUAL_PRIVATE_KEY # Batcher configuration POLL_INTERVAL=1s SUB_SAFETY_MARGIN=6 NUM_CONFIRMATIONS=1 SAFE_ABORT_NONCE_TOO_LOW_COUNT=3 RESUBMISSION_TIMEOUT=30s MAX_CHANNEL_DURATION=25 # RPC configuration BATCHER_RPC_PORT=8548 Important: Replace ALL placeholder va...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~318-~318: Use correct spacing
Context: ...ACTUAL_*`) with your real configuration values! ### 4. Get your private key Get a private ...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~320-~320: There might be a mistake here.
Context: ...ration values! ### 4. Get your private key Get a private key from your wallet that...
(QB_NEW_EN_OTHER)
[grammar] ~322-~322: Use correct spacing
Context: ... needs sufficient ETH to pay for L1 gas costs. The batcher account needs to be funded with ETH on L1 to pay for batch submission transactions. Monitor this account's balance regularly as it will consume ETH for each batch submission. ## Batcher configuration Create `scripts/...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~328-~328: Use correct spacing
Context: ...atch submission. ## Batcher configuration Create scripts/start-batcher.sh: ```...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~330-~330: Use correct spacing
Context: ...lout> ## Batcher configuration Create scripts/start-batcher.sh: bash #!/bin/bash source .env # Path to the op-batcher binary we built ../optimism/op-batcher/bin/op-batcher \ --l2-eth-rpc=$L2_RPC_URL \ --rollup-rpc=$ROLLUP_RPC_URL \ --poll-interval=$POLL_INTERVAL \ --sub-safety-margin=$SUB_SAFETY_MARGIN \ --num-confirmations=$NUM_CONFIRMATIONS \ --safe-abort-nonce-too-low-count=$SAFE_ABORT_NONCE_TOO_LOW_COUNT \ --resubmission-timeout=$RESUBMISSION_TIMEOUT \ --rpc.addr=0.0.0.0 \ --rpc.port=$BATCHER_RPC_PORT \ --rpc.enable-admin \ --max-channel-duration=$MAX_CHANNEL_DURATION \ --l1-eth-rpc=$L1_RPC_URL \ --private-key=$BATCHER_PRIVATE_KEY \ --batch-type=1 \ --data-availability-type=blobs \ --compress \ --log.level=info ### Batcher parameters explained * **`--...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~358-~358: Use correct spacing
Context: ....level=info ``` ### Batcher parameters explained * --poll-interval: How frequently the batcher checks for...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~365-~365: Use correct spacing
Context: ...*: Enable compression to reduce L1 data costs ## Starting the batcher ### 1. Verify pre...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~367-~367: Use correct spacing
Context: ...o reduce L1 data costs ## Starting the batcher ### 1. Verify prerequisites Ensure your se...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~369-~369: There might be a mistake here.
Context: ... ## Starting the batcher ### 1. Verify prerequisites Ensure your sequencer and rollup node a...
(QB_NEW_EN_OTHER)
[grammar] ~371-~371: Use correct spacing
Context: ...sure your sequencer and rollup node are running: ### Test L1 connectivity bash # Note: Make sure you have exported these environment variables to your current shell session: # export L1_RPC_URL="https://sepolia.infura.io/v3/YOUR_KEY" # export L2_RPC_URL="http://localhost:8545" # export ROLLUP_RPC_URL="http://localhost:8547" curl -X POST -H "Content-Type: application/json" \ --data '{"jsonrpc":"2.0","method":"eth_blockNumber","params":[],"id":1}' \ $L1_RPC_URL ### Test L2 connectivity ```bash curl ...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~387-~387: There might be a mistake here.
Context: ... \ $L1_RPC_URL ### Test L2 connectivity bash curl -X POST -H "Content-Type: application/json" \ --data '{"jsonrpc":"2.0","method":"eth_blockNumber","params":[],"id":1}' \ $L2_RPC_URL ### Test rollup node connectivity bas...
(QB_NEW_EN_OTHER)
[grammar] ~395-~395: There might be a mistake here.
Context: ...2_RPC_URL ### Test rollup node connectivity bash curl -X POST -H "Content-Type: application/json" \ --data '{"jsonrpc":"2.0","method":"optimism_syncStatus","params":[],"id":1}' \ $ROLLUP_RPC_URL </Steps> ### 2. Start the batcher bash # Make th...
(QB_NEW_EN_OTHER)
[grammar] ~404-~404: There might be a problem here.
Context: ...PC_URL </Steps> ### 2. Start the batcher bash # Make the script executable chmod +x scripts/start-batcher.sh # Start the batcher ./scripts/start-batcher.sh ``` ## Verification Verify your batcher is working correctl...
(QB_NEW_EN_MERGED_MATCH)
[grammar] ~416-~416: Use correct spacing
Context: ...ication Verify your batcher is working correctly: ### Check batcher status ```bash # Check b...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~418-~418: There might be a mistake here.
Context: ...s working correctly: ### Check batcher status bash # Check batcher RPC is responding curl -X POST -H "Content-Type: application/json" \ --data '{"jsonrpc":"2.0","method":"admin_startBatcher","params":[],"id":1}' \ http://localhost:8548 # Monitor batch submission activity (check L1 for recent transactions from your batcher address) # Replace with your actual batcher address curl -X POST -H "Content-Type: application/json" \ --data '{"jsonrpc":"2.0","method":"eth_getTransactionCount","params":["0xYOUR_BATCHER_ADDRESS","latest"],"id":1}' \ $L1_RPC_URL # Check if your batcher address has enough ETH for gas curl -X POST -H "Content-Type: application/json" \ --data '{"jsonrpc":"2.0","method":"eth_getBalance","params":["0xYOUR_BATCHER_ADDRESS","latest"],"id":1}' \ $L1_RPC_URL For detailed cost analysis and optimization strategies, refer to the Fee calculation tools. ## Next steps * For detailed parameter ...
(QB_NEW_EN_OTHER)
[grammar] ~442-~442: Use correct spacing
Context: ...ls/fee-calculator). ## Next steps * For detailed parameter documentation, s...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[style] ~446-~446: Three successive sentences begin with the same word. Consider rewording the sentence or use a thesaurus to find a synonym.
Context: ...-operators/tools/chain-monitoring). * For cost optimization strategies, refer to ...
(ENGLISH_WORD_REPEAT_BEGINNING_RULE)
[grammar] ~447-~447: Use hyphens correctly
Context: ...tutorials/dispute-games) for a complete fault proof system. Your batcher is now opera...
(QB_NEW_EN_OTHER_ERROR_IDS_29)
[grammar] ~447-~447: Use correct spacing
Context: ...spute-games) for a complete fault proof system. Your batcher is now operational and wil...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
pages/app-developers/tutorials/bridging/standard-bridge-standard-token.mdx
[style] ~68-~68: Consider a more concise word here.
Context: ...ment} You'll need a private key in order to sign transactions. Set your private k...
(IN_ORDER_TO_PREMIUM)
[grammar] ~76-~76: There might be a mistake here.
Context: ... {
Add an OP Sepolia RPC URL to your environment
} You'll need an RPC URL in order to...(QB_NEW_EN_OTHER)
[style] ~78-~78: Consider a more concise word here.
Context: ...ronment} You'll need an RPC URL in order to connect to OP Sepolia. Set your RPC U...
(IN_ORDER_TO_PREMIUM)
[grammar] ~84-~84: There might be a mistake here.
Context: ...dd your L1 ERC-20 token address to your environment} You'll need to know the address of...
(QB_NEW_EN_OTHER)
[style] ~86-~86: Consider a more concise word here.
Context: ...now the address of your L1 ERC-20 token in order to create a bridged representation of it o...
(IN_ORDER_TO_PREMIUM)
[grammar] ~92-~92: Use correct spacing
Context: ...52a ``` {
Deploy your L2 ERC-20 token
} You can now deploy your L2 ERC-20 token...(QB_NEW_EN_OTHER_ERROR_IDS_5)
pages/notices/upgrade-14.mdx
[grammar] ~61-~61: Use hyphens correctly
Context: ...ade, the on-chain implementation of the fault proof VM will be [DeployMIPS.s.sol](http...
(QB_NEW_EN_OTHER_ERROR_IDS_29)
Co-authored-by: Bradley Camacho <[email protected]>
There was a problem hiding this comment.
Actionable comments posted: 0
♻️ Duplicate comments (1)
pages/operators/chain-operators/deploy/spin-batcher.mdx (1)
23-25: Replace placeholder sequencer links before merge
Both occurrences still contain\[sequencer]\(Add link later)/[sequencer guide](add this later). These will render literally and break navigation.-After you have spun up your \[sequencer]\(Add link later), … -…please refer to the \[sequencer guide]\(add this later) first. +After you have spun up your [sequencer](/operators/chain-operators/deploy/sequencer), … +…please refer to the [sequencer guide](/operators/chain-operators/deploy/sequencer) first.
🧹 Nitpick comments (1)
pages/operators/chain-operators/deploy/spin-batcher.mdx (1)
44-46: Grammar: use “an L1 RPC endpoint”
Indefinite article before an acronym pronounced “ell-one” should be “an”.-* Access to a L1 RPC endpoint +* Access to an L1 RPC endpoint
📜 Review details
Configuration used: .coderabbit.yaml
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (1)
pages/operators/chain-operators/deploy/spin-batcher.mdx(1 hunks)
🧰 Additional context used
📓 Path-based instructions (1)
`**/*.mdx`: "ALWAYS review Markdown content THOROUGHLY with the following criter...
**/*.mdx: "ALWAYS review Markdown content THOROUGHLY with the following criteria:
- First, check the frontmatter section at the top of the file:
- For regular pages, ensure ALL these fields are present and not empty:
--- title: [non-empty] lang: [non-empty] description: [non-empty] topic: [non-empty] personas: [non-empty array] categories: [non-empty array] content_type: [valid type] ---
- For landing pages (index.mdx or files with ), only these fields are required:
--- title: [non-empty] lang: [non-empty] description: [non-empty] topic: [non-empty] ---
- If any required fields are missing or empty, comment:
'This file appears to be missing required metadata. Please check keywords.config.yaml for valid options and add the required fields manually. You can validate your changes by running:pnpm validate-metadata ```'- Use proper nouns in place of personal pronouns like 'We' and 'Our' to maintain consistency in communal documentation.
- Avoid gender-specific language and use the imperative form.
- Monitor capitalization for emphasis. Avoid using all caps, italics, or bold for emphasis.
- Ensure proper nouns are capitalized in sentences.
- Apply the Oxford comma.
- Use proper title case for buttons, tab names, page names, and links. Sentence case should be used for body content and short phrases, even in links.
- Use correct spelling and grammar at all times (IMPORTANT).
- For H1, H2, and H3 headers:
- Use sentence case, capitalizing only the first word.
- Preserve the capitalization of proper nouns, technical terms, and acronyms as defined in the 'nouns.txt' file located in the root directory of the project.
- Do not automatically lowercase words that appear in the 'nouns.txt' file, regardless of their position in the header.
- Flag any headers that seem to inconsistently apply these rules for manual review.
- When reviewing capitalization, always refer to the 'nouns.txt' file for the correct capitalization of proper nouns and technical terms specific to the project.
"
⚙️ Source: CodeRabbit Configuration File
List of files the instruction was applied to:
pages/operators/chain-operators/deploy/spin-batcher.mdx
🧠 Learnings (2)
📓 Common learnings
Learnt from: sbvegan
PR: ethereum-optimism/docs#1001
File: pages/builders.mdx:11-12
Timestamp: 2024-10-22T02:58:02.175Z
Learning: Prefer using 'OP Stack' over 'OP Mainnet' in documentation for consistency.
Learnt from: qbzzt
PR: ethereum-optimism/docs#1613
File: public/tutorials/attest.mjs:64-71
Timestamp: 2025-05-24T18:24:46.628Z
Learning: For tutorial and educational code in the ethereum-optimism/docs repository, prioritize simplicity and clarity over production-level robustness. Hardcoded values and simplified error handling are acceptable when they help demonstrate core concepts without unnecessary complexity.
pages/operators/chain-operators/deploy/spin-batcher.mdx (1)
Learnt from: sbvegan
PR: ethereum-optimism/docs#1001
File: pages/builders.mdx:11-12
Timestamp: 2024-10-22T02:58:02.175Z
Learning: Prefer using 'OP Stack' over 'OP Mainnet' in documentation for consistency.
🪛 LanguageTool
pages/operators/chain-operators/deploy/spin-batcher.mdx
[grammar] ~19-~19: Use correct spacing
Context: ...se' --- import { Callout, Steps } from 'nextra/components' # Spinning up the batcher After you have...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~21-~21: Use correct spacing
Context: ... 'nextra/components' # Spinning up the batcher After you have spun up your [sequencer...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~23-~23: Use correct spacing
Context: ...and enables users to reconstruct the L2 state. This guide assumes you already have a f...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~25-~25: Use correct spacing
Context: ...the [sequencer guide](add this later) first. ## Understanding the batcher's role The b...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~27-~27: Use correct spacing
Context: ... first. ## Understanding the batcher's role The batcher (op-batcher) serves as a ...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~29-~29: Use correct spacing
Context: ...ata to L1. Its primary responsibilities include: * Batch submission: Collecting L2 trans...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~34-~34: Use correct spacing
Context: ...a channels for optimal batch submission timing The batcher reads transaction data from...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~36-~36: There might be a problem here.
Context: ...batches to the BatchInbox contract on L1. ## Prerequisites Before setting up your batcher, ensure ...
(QB_NEW_EN_MERGED_MATCH)
[grammar] ~40-~40: Use correct spacing
Context: ...ore setting up your batcher, ensure you have: Running infrastructure: * An opera...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~42-~42: Use correct spacing
Context: ...ur batcher, ensure you have: Running infrastructure: * An operational sequencer node * Acces...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~45-~45: Use articles correctly
Context: ...perational sequencer node * Access to a L1 RPC endpoint Network information: ...
(QB_NEW_EN_OTHER_ERROR_IDS_11)
[grammar] ~45-~45: Use correct spacing
Context: ...l sequencer node * Access to a L1 RPC endpoint Network information: * Your L2 cha...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~47-~47: Use correct spacing
Context: ... Access to a L1 RPC endpoint Network information: * Your L2 chain ID and network configurat...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~50-~50:
Context: ...etwork details (chain ID, RPC endpoints) * BatchInbox contract address from your deployment ## Softwa...
(QB_NEW_EN_OTHER_ERROR_IDS_)
[grammar] ~51-~51: Use correct spacing
Context: ...BatchInbox contract address from your deployment ## Software installation ### Finding the ...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~53-~53: Use correct spacing
Context: ...dress from your deployment ## Software installation ### Finding the current stable releases To...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~55-~55: Use correct spacing
Context: ...llation ### Finding the current stable releases To ensure you're using the latest compa...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~57-~57: Use correct spacing
Context: ...ts, always check the official releases page. Look for the latest op-batcher/v* rel...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~59-~59: Use correct spacing
Context: ...e that's compatible with your sequencer setup. This guide uses op-batcher/v1.13.1 which is compatible with op-node/v1.13.3 and op-geth/v1.101511.0 from the sequencer setup. Always check the release notes for compatibility information. ### Build from source Clone and build op-b...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~66-~66: There might be a mistake here.
Context: ...information. ### Build from source Clone and build op-batcher: ```bash # ...
(QB_NEW_EN_OTHER)
[grammar] ~68-~68: Use correct spacing
Context: ... ### Build from source Clone and build op-batcher: bash # If you don't already have the optimism repository from the sequencer setup git clone https://github.com/ethereum-optimism/optimism.git cd optimism # Checkout the latest release tag git checkout op-batcher/v1.13.1 # Build op-batcher cd op-batcher just # Binary will be available at ./bin/op-batcher ### Verify installation Run this command t...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~85-~85: There might be a mistake here.
Context: ...ble at ./bin/op-batcher ``` ### Verify installation Run this command to verify the installa...
(QB_NEW_EN_OTHER)
[grammar] ~87-~87: Use correct spacing
Context: ...llation Run this command to verify the installation: bash ./bin/op-batcher --version ### Docker alternative (For containerized e...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~93-~93: Use correct spacing
Context: ...# Docker alternative (For containerized environments) If you prefer containerized deployment,...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~95-~95: Use correct spacing
Context: ...oyment, you can use the official Docker images. ### Complete Docker setup guide
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~97-~97: Use correct spacing
Context: ...cker images. ### Complete Docker setup guide
Complete Docker setup guide
If you choose the Docker approach, you'...(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~102-~102: Use correct spacing
Context: ...choose the Docker approach, you'll need to: 1. **Set up directory structure and copy con...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~104-~104: Use correct spacing
Context: ...ectory structure and copy configuration files:** bash # Create your batcher working directory mkdir ~/batcher-node cd ~/batcher-node # Copy configuration files from op-deployer output # Note: Adjust the path if your .deployer directory is located elsewhere cp ~/.deployer/state.json . # Extract the BatchInbox address BATCH_INBOX_ADDRESS=$(cat state.json | jq -r '.opChainDeployments[0].systemConfigProxyAddress') echo "BatchInbox Address: $BATCH_INBOX_ADDRESS" 2. Create environment variables file: ...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~120-~120: Use articles correctly
Context: ...CH_INBOX_ADDRESS" 2. **Create environment variables file:** bash # Create...
(QB_NEW_EN_OTHER_ERROR_IDS_11)
[grammar] ~120-~120: Use correct spacing
Context: ...` 2. Create environment variables file: bash # Create .env file with your actual values cat > .env << 'EOF' # L1 Configuration - Replace with your actual RPC URLs L1_RPC_URL=https://sepolia.infura.io/v3/YOUR_ACTUAL_INFURA_KEY # L2 Configuration - Should match your sequencer setup L2_RPC_URL=http://sequencer-node:8545 ROLLUP_RPC_URL=http://sequencer-node:8547 # Contract addresses - Extract from your op-deployer output BATCH_INBOX_ADDRESS=YOUR_ACTUAL_BATCH_INBOX_ADDRESS # Private key - Replace with your actual private key BATCHER_PRIVATE_KEY=0xYOUR_ACTUAL_PRIVATE_KEY # Batcher configuration POLL_INTERVAL=1s SUB_SAFETY_MARGIN=6 NUM_CONFIRMATIONS=1 SAFE_ABORT_NONCE_TOO_LOW_COUNT=3 RESUBMISSION_TIMEOUT=30s MAX_CHANNEL_DURATION=25 # RPC configuration BATCHER_RPC_PORT=8548 EOF Important: Replace ALL placeholder va...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~151-~151: Use correct spacing
Context: ...ACTUAL_*`) with your real configuration values. 3. Create docker-compose.yml: <Callou...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~153-~153: Use correct spacing
Context: ...l configuration values. 3. Create docker-compose.yml: This configuration assumes your sequencer is running in a Docker container named sequencer-node on the same op-stack network. Make sure your sequencer is running before starting the batcher. yaml version: '3.8' services: op-batcher: image: us-docker.pkg.dev/oplabs-tools-artifacts/images/op-batcher:v1.13.1 volumes: - .:/workspace working_dir: /workspace ports: - "8548:8548" env_file: - .env command: - "op-batcher" - "--l2-eth-rpc=${L2_RPC_URL}" - "--rollup-rpc=${ROLLUP_RPC_URL}" - "--poll-interval=${POLL_INTERVAL}" - "--sub-safety-margin=${SUB_SAFETY_MARGIN}" - "--num-confirmations=${NUM_CONFIRMATIONS}" - "--safe-abort-nonce-too-low-count=${SAFE_ABORT_NONCE_TOO_LOW_COUNT}" - "--resubmission-timeout=${RESUBMISSION_TIMEOUT}" - "--rpc.addr=0.0.0.0" - "--rpc.port=${BATCHER_RPC_PORT}" - "--rpc.enable-admin" - "--max-channel-duration=${MAX_CHANNEL_DURATION}" - "--l1-eth-rpc=${L1_RPC_URL}" - "--private-key=${BATCHER_PRIVATE_KEY}" - "--batch-type=1" - "--data-availability-type=blobs" - "--compress" - "--log.level=info" restart: unless-stopped 4. Start the batcher service: ```bash...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~195-~195: Use correct spacing
Context: ...topped 4. **Start the batcher service:** bash # Make sure your sequencer network exists docker network create op-stack 2>/dev/null || true # Start the batcher docker-compose up -d # View logs docker-compose logs -f op-batcher ```` 5. Verify batcher is running: ```bash...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~208-~208: Use correct spacing
Context: ...tcher ```` 5. Verify batcher is running: bash # Check batcher RPC is responding curl -X POST -H "Content-Type: application/json" \ --data '{"jsonrpc":"2.0","method":"admin_startBatcher","params":[],"id":1}' \ http://localhost:8548 # Check container status docker-compose ps 6. Final directory structure: ```bash...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~220-~220: Use correct spacing
Context: ...mpose ps 6. **Final directory structure:** bash ~/batcher-node/ ├── state.json # Copied from ~/.deployer/ ├── .env # Environment variables └── docker-compose.yml # Docker configuration ```
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~235-~235: Use correct spacing
Context: ...e section. ## Configuration setup ### 1. Organize your workspace Create your...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~237-~237: There might be a mistake here.
Context: ...nfiguration setup ### 1. Organize your workspace Create your batcher working directory: ...
(QB_NEW_EN_OTHER)
[grammar] ~239-~239: Use correct spacing
Context: ... workspace Create your batcher working directory: bash # Create batcher directory at the same level as your sequencer mkdir batcher-node cd batcher-node # Create scripts directory mkdir scripts Your final directory structure should l...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~250-~250: There might be a problem here.
Context: ...r final directory structure should look like: bash ~/ ├── optimism/ # Contains op-batcher binary ├── sequencer-node/ # Your sequencer setup ├── proposer-node/ # Your proposer setup ├── .deployer/ # From op-deployer │ └── state.json └── batcher-node/ # Your batcher working directory ├── state.json # Copied from .deployer ├── .env └── scripts/ └── start-batcher.sh ### 2. Extract BatchInbox address Extrac...
(QB_NEW_EN_MERGED_MATCH)
[grammar] ~266-~266: Use articles correctly
Context: ... └── start-batcher.sh ``` ### 2. Extract BatchInbox address Extract the `Batc...
(QB_NEW_EN_OTHER_ERROR_IDS_11)
[grammar] ~266-~266: There might be a mistake here.
Context: ...her.sh ``` ### 2. Extract BatchInbox address Extract the `BatchInbox` contract addre...
(QB_NEW_EN_OTHER)
[grammar] ~268-~268: Use correct spacing
Context: ... contract address from your op-deployer output: bash # Navigate to batcher directory cd ~/batcher-node # Copy the deployment state file from op-deployer # Update the path if your .deployer directory is located elsewhere cp ../.deployer/state.json . # Extract the BatchInbox address BATCH_INBOX_ADDRESS=$(cat state.json | jq -r '.opChainDeployments[0].systemConfigProxyAddress') echo "BatchInbox Address: $BATCH_INBOX_ADDRESS" The batcher submits transaction batches to the BatchInbox contract on L1. This contract is responsible for accepting and storing L2 transaction data. ### 3. Set up environment variables Create...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~287-~287: There might be a mistake here.
Context: .... ### 3. Set up environment variables Create your .env file with the actual...
(QB_NEW_EN_OTHER)
[grammar] ~289-~289: Use correct spacing
Context: ...Create your .env file with the actual values: bash # Create .env file with your actual values # L1 Configuration - Replace with your actual RPC URL L1_RPC_URL=https://sepolia.infura.io/v3/YOUR_ACTUAL_INFURA_KEY # L2 Configuration - Should match your sequencer setup L2_RPC_URL=http://localhost:8545 ROLLUP_RPC_URL=http://localhost:8547 # Contract addresses - Extract from your op-deployer output BATCH_INBOX_ADDRESS=YOUR_ACTUAL_BATCH_INBOX_ADDRESS # Private key - Replace with your actual private key BATCHER_PRIVATE_KEY=0xYOUR_ACTUAL_PRIVATE_KEY # Batcher configuration POLL_INTERVAL=1s SUB_SAFETY_MARGIN=6 NUM_CONFIRMATIONS=1 SAFE_ABORT_NONCE_TOO_LOW_COUNT=3 RESUBMISSION_TIMEOUT=30s MAX_CHANNEL_DURATION=25 # RPC configuration BATCHER_RPC_PORT=8548 Important: Replace ALL placeholder va...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~318-~318: Use correct spacing
Context: ...ACTUAL_*`) with your real configuration values! ### 4. Get your private key Get a private ...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~320-~320: There might be a mistake here.
Context: ...ration values! ### 4. Get your private key Get a private key from your wallet that...
(QB_NEW_EN_OTHER)
[grammar] ~322-~322: Use correct spacing
Context: ... needs sufficient ETH to pay for L1 gas costs. The batcher account needs to be funded with ETH on L1 to pay for batch submission transactions. Monitor this account's balance regularly as it will consume ETH for each batch submission. ## Batcher configuration Create `scripts/...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~328-~328: Use correct spacing
Context: ...atch submission. ## Batcher configuration Create scripts/start-batcher.sh: ```...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~330-~330: Use correct spacing
Context: ...lout> ## Batcher configuration Create scripts/start-batcher.sh: bash #!/bin/bash source .env # Path to the op-batcher binary we built ../optimism/op-batcher/bin/op-batcher \ --l2-eth-rpc=$L2_RPC_URL \ --rollup-rpc=$ROLLUP_RPC_URL \ --poll-interval=$POLL_INTERVAL \ --sub-safety-margin=$SUB_SAFETY_MARGIN \ --num-confirmations=$NUM_CONFIRMATIONS \ --safe-abort-nonce-too-low-count=$SAFE_ABORT_NONCE_TOO_LOW_COUNT \ --resubmission-timeout=$RESUBMISSION_TIMEOUT \ --rpc.addr=0.0.0.0 \ --rpc.port=$BATCHER_RPC_PORT \ --rpc.enable-admin \ --max-channel-duration=$MAX_CHANNEL_DURATION \ --l1-eth-rpc=$L1_RPC_URL \ --private-key=$BATCHER_PRIVATE_KEY \ --batch-type=1 \ --data-availability-type=blobs \ --compress \ --log.level=info ### Batcher parameters explained * **`--...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~358-~358: Use correct spacing
Context: ....level=info ``` ### Batcher parameters explained * --poll-interval: How frequently the batcher checks for...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~365-~365: Use correct spacing
Context: ...*: Enable compression to reduce L1 data costs ## Starting the batcher ### 1. Verify pre...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~367-~367: Use correct spacing
Context: ...o reduce L1 data costs ## Starting the batcher ### 1. Verify prerequisites Ensure your se...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~369-~369: There might be a mistake here.
Context: ... ## Starting the batcher ### 1. Verify prerequisites Ensure your sequencer and rollup node a...
(QB_NEW_EN_OTHER)
[grammar] ~371-~371: Use correct spacing
Context: ...sure your sequencer and rollup node are running: ### Test L1 connectivity bash # Note: Make sure you have exported these environment variables to your current shell session: # export L1_RPC_URL="https://sepolia.infura.io/v3/YOUR_KEY" # export L2_RPC_URL="http://localhost:8545" # export ROLLUP_RPC_URL="http://localhost:8547" curl -X POST -H "Content-Type: application/json" \ --data '{"jsonrpc":"2.0","method":"eth_blockNumber","params":[],"id":1}' \ $L1_RPC_URL ### Test L2 connectivity ```bash curl ...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~387-~387: There might be a mistake here.
Context: ... \ $L1_RPC_URL ### Test L2 connectivity bash curl -X POST -H "Content-Type: application/json" \ --data '{"jsonrpc":"2.0","method":"eth_blockNumber","params":[],"id":1}' \ $L2_RPC_URL ### Test rollup node connectivity bas...
(QB_NEW_EN_OTHER)
[grammar] ~395-~395: There might be a mistake here.
Context: ...2_RPC_URL ### Test rollup node connectivity bash curl -X POST -H "Content-Type: application/json" \ --data '{"jsonrpc":"2.0","method":"optimism_syncStatus","params":[],"id":1}' \ $ROLLUP_RPC_URL </Steps> ### 2. Start the batcher bash # Make th...
(QB_NEW_EN_OTHER)
[grammar] ~404-~404: There might be a problem here.
Context: ...PC_URL </Steps> ### 2. Start the batcher bash # Make the script executable chmod +x scripts/start-batcher.sh # Start the batcher ./scripts/start-batcher.sh ``` ## Verification Verify your batcher is working correctl...
(QB_NEW_EN_MERGED_MATCH)
[grammar] ~416-~416: Use correct spacing
Context: ...ication Verify your batcher is working correctly: ### Check batcher status ```bash # Check b...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[grammar] ~418-~418: There might be a mistake here.
Context: ...s working correctly: ### Check batcher status bash # Check batcher RPC is responding curl -X POST -H "Content-Type: application/json" \ --data '{"jsonrpc":"2.0","method":"admin_startBatcher","params":[],"id":1}' \ http://localhost:8548 # Monitor batch submission activity (check L1 for recent transactions from your batcher address) # Replace with your actual batcher address curl -X POST -H "Content-Type: application/json" \ --data '{"jsonrpc":"2.0","method":"eth_getTransactionCount","params":["0xYOUR_BATCHER_ADDRESS","latest"],"id":1}' \ $L1_RPC_URL # Check if your batcher address has enough ETH for gas curl -X POST -H "Content-Type: application/json" \ --data '{"jsonrpc":"2.0","method":"eth_getBalance","params":["0xYOUR_BATCHER_ADDRESS","latest"],"id":1}' \ $L1_RPC_URL For detailed cost analysis and optimization strategies, refer to the Fee calculation tools. ## Next steps * For detailed parameter ...
(QB_NEW_EN_OTHER)
[grammar] ~442-~442: Use correct spacing
Context: ...ls/fee-calculator). ## Next steps * For detailed parameter documentation, s...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
[style] ~446-~446: Three successive sentences begin with the same word. Consider rewording the sentence or use a thesaurus to find a synonym.
Context: ...-operators/tools/chain-monitoring). * For cost optimization strategies, refer to ...
(ENGLISH_WORD_REPEAT_BEGINNING_RULE)
[grammar] ~447-~447: Use hyphens correctly
Context: ...tutorials/dispute-games) for a complete fault proof system. Your batcher is now opera...
(QB_NEW_EN_OTHER_ERROR_IDS_29)
[grammar] ~447-~447: Use correct spacing
Context: ...spute-games) for a complete fault proof system. Your batcher is now operational and wil...
(QB_NEW_EN_OTHER_ERROR_IDS_5)
⏰ Context from checks skipped due to timeout of 90000ms. You can increase the timeout in your CodeRabbit configuration to a maximum of 15 minutes (900000ms). (4)
- GitHub Check: Redirect rules - docs-optimism
- GitHub Check: Header rules - docs-optimism
- GitHub Check: Pages changed - docs-optimism
- GitHub Check: pr-workflow
🔇 Additional comments (2)
pages/operators/chain-operators/deploy/spin-batcher.mdx (2)
160-193: Docker compose block now looks syntactically valid – nice fix
Top-levelservices:is properly nested and all keys are consistently indented.
No further YAML issues spotted.
1-17: Front-matter passes metadata requirements
All required fields (title,lang,description,topic,personas,categories,content_type) are present and non-empty.
Description
Creates a complete batcher deployment guide with both build-from-source and Docker setup options.
Changes
op-batcher/v1.13.1with step-by-step compilation and configurationdocker-compose.yml.envsetup for both deployment methodsThis gives chain operators comprehensive options for deploying and configuring their batcher with clear guidance for both deployment methods.
Tests
Additional context
Metadata
https://github.com/ethereum-optimism/devrel/issues/649