Feature/http update wi fi client parameter

libraries/ESP8266HTTPClient/examples/Authorization/Authorization.ino

@@ -12,22 +12,22 @@
 
 #include <ESP8266HTTPClient.h>
 
-#define USE_SERIAL Serial
+#include <WiFiClient.h>
 
 ESP8266WiFiMulti WiFiMulti;
 
 void setup() {
 
-  USE_SERIAL.begin(115200);
-  // USE_SERIAL.setDebugOutput(true);
+  Serial.begin(115200);
+  // Serial.setDebugOutput(true);
 
-  USE_SERIAL.println();
-  USE_SERIAL.println();
-  USE_SERIAL.println();
+  Serial.println();
+  Serial.println();
+  Serial.println();
 
   for (uint8_t t = 4; t > 0; t--) {
-    USE_SERIAL.printf("[SETUP] WAIT %d...\n", t);
-    USE_SERIAL.flush();
+    Serial.printf("[SETUP] WAIT %d...\n", t);
+    Serial.flush();
     delay(1000);
   }
 
@@ -40,46 +40,47 @@ void loop() {
   // wait for WiFi connection
   if ((WiFiMulti.run() == WL_CONNECTED)) {
 
+    WiFiClient client;
+
     HTTPClient http;
 
-    USE_SERIAL.print("[HTTP] begin...\n");
+    Serial.print("[HTTP] begin...\n");
     // configure traged server and url
 
 
-    http.begin("http://user:[email protected]/test.html");
+    http.begin(client, "http://guest:[email protected]/HTTP/Basic/");
 
     /*
       // or
-      http.begin("http://192.168.1.12/test.html");
-      http.setAuthorization("user", "password");
+      http.begin(client, "http://jigsaw.w3.org/HTTP/Basic/");
+      http.setAuthorization("guest", "guest");
 
       // or
-      http.begin("http://192.168.1.12/test.html");
-      http.setAuthorization("dXNlcjpwYXN3b3Jk");
+      http.begin(client, "http://jigsaw.w3.org/HTTP/Basic/");
+      http.setAuthorization("Z3Vlc3Q6Z3Vlc3Q=");
     */
 
 
-    USE_SERIAL.print("[HTTP] GET...\n");
+    Serial.print("[HTTP] GET...\n");
     // start connection and send HTTP header
     int httpCode = http.GET();
 
     // httpCode will be negative on error
     if (httpCode > 0) {
       // HTTP header has been send and Server response header has been handled
-      USE_SERIAL.printf("[HTTP] GET... code: %d\n", httpCode);
+      Serial.printf("[HTTP] GET... code: %d\n", httpCode);
 
       // file found at server
       if (httpCode == HTTP_CODE_OK) {
         String payload = http.getString();
-        USE_SERIAL.println(payload);
+        Serial.println(payload);
       }
     } else {
-      USE_SERIAL.printf("[HTTP] GET... failed, error: %s\n", http.errorToString(httpCode).c_str());
+      Serial.printf("[HTTP] GET... failed, error: %s\n", http.errorToString(httpCode).c_str());
     }
 
     http.end();
   }
 
   delay(10000);
 }
-

libraries/ESP8266HTTPClient/examples/BasicHttpClient/BasicHttpClient.ino

@@ -12,22 +12,22 @@
 
 #include <ESP8266HTTPClient.h>
 
-#define USE_SERIAL Serial
+#include <WiFiClient.h>
 
 ESP8266WiFiMulti WiFiMulti;
 
 void setup() {
 
-  USE_SERIAL.begin(115200);
-  // USE_SERIAL.setDebugOutput(true);
+  Serial.begin(115200);
+  // Serial.setDebugOutput(true);
 
-  USE_SERIAL.println();
-  USE_SERIAL.println();
-  USE_SERIAL.println();
+  Serial.println();
+  Serial.println();
+  Serial.println();
 
   for (uint8_t t = 4; t > 0; t--) {
-    USE_SERIAL.printf("[SETUP] WAIT %d...\n", t);
-    USE_SERIAL.flush();
+    Serial.printf("[SETUP] WAIT %d...\n", t);
+    Serial.flush();
     delay(1000);
   }
 
@@ -40,34 +40,37 @@ void loop() {
   // wait for WiFi connection
   if ((WiFiMulti.run() == WL_CONNECTED)) {
 
+    WiFiClient client;
+
     HTTPClient http;
 
-    USE_SERIAL.print("[HTTP] begin...\n");
-    // configure traged server and url
-    //http.begin("https://192.168.1.12/test.html", "7a 9c f4 db 40 d3 62 5a 6e 21 bc 5c cc 66 c8 3e a1 45 59 38"); //HTTPS
-    http.begin("http://192.168.1.12/test.html"); //HTTP
+    Serial.print("[HTTP] begin...\n");
+    if (http.begin(client, "http://jigsaw.w3.org/HTTP/connection.html")) {  // HTTP
+
 
-    USE_SERIAL.print("[HTTP] GET...\n");
-    // start connection and send HTTP header
-    int httpCode = http.GET();
+      Serial.print("[HTTP] GET...\n");
+      // start connection and send HTTP header
+      int httpCode = http.GET();
 
-    // httpCode will be negative on error
-    if (httpCode > 0) {
-      // HTTP header has been send and Server response header has been handled
-      USE_SERIAL.printf("[HTTP] GET... code: %d\n", httpCode);
+      // httpCode will be negative on error
+      if (httpCode > 0) {
+        // HTTP header has been send and Server response header has been handled
+        Serial.printf("[HTTP] GET... code: %d\n", httpCode);
 
-      // file found at server
-      if (httpCode == HTTP_CODE_OK) {
-        String payload = http.getString();
-        USE_SERIAL.println(payload);
+        // file found at server
+        if (httpCode == HTTP_CODE_OK || httpCode == HTTP_CODE_MOVED_PERMANENTLY) {
+          String payload = http.getString();
+          Serial.println(payload);
+        }
+      } else {
+        Serial.printf("[HTTP] GET... failed, error: %s\n", http.errorToString(httpCode).c_str());
       }
+
+      http.end();
     } else {
-      USE_SERIAL.printf("[HTTP] GET... failed, error: %s\n", http.errorToString(httpCode).c_str());
+      Serial.printf("[HTTP} Unable to connect\n");
     }
-
-    http.end();
   }
 
   delay(10000);
 }
-

libraries/ESP8266HTTPClient/examples/BasicHttpsClient/BasicHttpsClient.ino

@@ -0,0 +1,78 @@
+/**
+   BasicHTTPSClient.ino
+
+    Created on: 20.08.2018
+
+*/
+
+#include <Arduino.h>
+
+#include <ESP8266WiFi.h>
+#include <ESP8266WiFiMulti.h>
+
+#include <ESP8266HTTPClient.h>
+
+#include <WiFiClientSecureBearSSL.h>
+// Fingerprint for demo URL, expires on June 2, 2019, needs to be updated well before this date
+const uint8_t fingerprint[20] = {0x5A, 0xCF, 0xFE, 0xF0, 0xF1, 0xA6, 0xF4, 0x5F, 0xD2, 0x11, 0x11, 0xC6, 0x1D, 0x2F, 0x0E, 0xBC, 0x39, 0x8D, 0x50, 0xE0};
+
+ESP8266WiFiMulti WiFiMulti;
+
+void setup() {
+
+  Serial.begin(115200);
+  // Serial.setDebugOutput(true);
+
+  Serial.println();
+  Serial.println();
+  Serial.println();
+
+  for (uint8_t t = 4; t > 0; t--) {
+    Serial.printf("[SETUP] WAIT %d...\n", t);
+    Serial.flush();
+    delay(1000);
+  }
+
+  WiFi.mode(WIFI_STA);
+  WiFiMulti.addAP("SSID", "PASSWORD");
+}
+
+void loop() {
+  // wait for WiFi connection
+  if ((WiFiMulti.run() == WL_CONNECTED)) {
+
+    BearSSL::WiFiClientSecure client;
+    client.setFingerprint(fingerprint);
+
+    HTTPClient https;
+
+    Serial.print("[HTTPS] begin...\n");
+    if (https.begin(client, "https://jigsaw.w3.org/HTTP/connection.html")) {  // HTTPS
+
+
+      Serial.print("[HTTPS] GET...\n");
+      // start connection and send HTTP header
+      int httpCode = https.GET();
+
+      // httpCode will be negative on error
+      if (httpCode > 0) {
+        // HTTP header has been send and Server response header has been handled
+        Serial.printf("[HTTPS] GET... code: %d\n", httpCode);
+
+        // file found at server
+        if (httpCode == HTTP_CODE_OK || httpCode == HTTP_CODE_MOVED_PERMANENTLY) {
+          String payload = https.getString();
+          Serial.println(payload);
+        }
+      } else {
+        Serial.printf("[HTTPS] GET... failed, error: %s\n", https.errorToString(httpCode).c_str());
+      }
+
+      https.end();
+    } else {
+      Serial.printf("[HTTPS] Unable to connect\n");
+    }
+  }
+
+  delay(10000);
+}

libraries/ESP8266HTTPClient/examples/DigestAuthorization/DigestAuthorization.ino

@@ -11,8 +11,8 @@
 
 #include <ESP8266HTTPClient.h>
 
-const char* ssid = "........";
-const char* ssidPassword = "........";
+const char* ssid = "SSID";
+const char* ssidPassword = "PASSWORD";
 
 const char *username = "admin";
 const char *password = "admin";
@@ -76,7 +76,7 @@ String getDigestAuth(String& authReq, const String& username, const String& pass
 }
 
 void setup() {
-  Serial.begin(9600);
+  Serial.begin(115200);
 
   WiFi.mode(WIFI_STA);
   WiFi.begin(ssid, ssidPassword);
@@ -95,10 +95,12 @@ void setup() {
 void loop() {
   HTTPClient http;
 
+  WiFiClient client;
+
   Serial.print("[HTTP] begin...\n");
 
   // configure traged server and url
-  http.begin(String(server) + String(uri));
+  http.begin(client, String(server) + String(uri));
 
 
   const char *keys[] = {"WWW-Authenticate"};
@@ -115,7 +117,7 @@ void loop() {
     String authorization = getDigestAuth(authReq, String(username), String(password), String(uri), 1);
 
     http.end();
-    http.begin(String(server) + String(uri));
+    http.begin(client, String(server) + String(uri));
 
     http.addHeader("Authorization", authorization);
 

libraries/ESP8266HTTPClient/examples/ReuseConnection/ReuseConnection.ino

@@ -13,24 +13,22 @@
 
 #include <ESP8266HTTPClient.h>
 
-#define USE_SERIAL Serial
-
 ESP8266WiFiMulti WiFiMulti;
 
 HTTPClient http;
 
 void setup() {
 
-  USE_SERIAL.begin(115200);
-  // USE_SERIAL.setDebugOutput(true);
+  Serial.begin(115200);
+  // Serial.setDebugOutput(true);
 
-  USE_SERIAL.println();
-  USE_SERIAL.println();
-  USE_SERIAL.println();
+  Serial.println();
+  Serial.println();
+  Serial.println();
 
   for (uint8_t t = 4; t > 0; t--) {
-    USE_SERIAL.printf("[SETUP] WAIT %d...\n", t);
-    USE_SERIAL.flush();
+    Serial.printf("[SETUP] WAIT %d...\n", t);
+    Serial.flush();
     delay(1000);
   }
 
@@ -45,26 +43,25 @@ void loop() {
   // wait for WiFi connection
   if ((WiFiMulti.run() == WL_CONNECTED)) {
 
-    http.begin("http://192.168.1.12/test.html");
-    //http.begin("192.168.1.12", 80, "/test.html");
+    WiFiClient client;
+
+    http.begin(client, "http://jigsaw.w3.org/HTTP/connection.html");
+    //http.begin(client, "jigsaw.w3.org", 80, "/HTTP/connection.html");
 
     int httpCode = http.GET();
     if (httpCode > 0) {
-      USE_SERIAL.printf("[HTTP] GET... code: %d\n", httpCode);
+      Serial.printf("[HTTP] GET... code: %d\n", httpCode);
 
       // file found at server
       if (httpCode == HTTP_CODE_OK) {
-        http.writeToStream(&USE_SERIAL);
+        http.writeToStream(&Serial);
       }
     } else {
-      USE_SERIAL.printf("[HTTP] GET... failed, error: %s\n", http.errorToString(httpCode).c_str());
+      Serial.printf("[HTTP] GET... failed, error: %s\n", http.errorToString(httpCode).c_str());
     }
 
     http.end();
   }
 
   delay(1000);
 }
-
-
-