Cert out of date (X509) error in Arduino IDE Board Manager #846
AutoKitsune
started this conversation in
General
Replies: 2 comments 1 reply
-
Beta Was this translation helpful? Give feedback.
1 reply
-
|
As soon as I have internet on the computer back I will look at this, all I
have now is the phone which can't run telnet
…____________
Spence Konde
Azzy’S Electronics
New products! Check them out at tindie.com/stores/DrAzzy
GitHub: github.com/SpenceKonde
ATTinyCore: Arduino support for almost every ATTiny microcontroller
Contact: ***@***.***
On Wed, Feb 21, 2024, 02:40 Mark Fox ***@***.***> wrote:
Hello. When I add the URL:
https://drazzy.com/package_drazzy.com_index.json to the ArdIDE 2.3.2
boards manager, I get the following in response:
Some indexes could not be updated. Get "
https://drazzy.com/package_drazzy.com_index.json": tls: failed to verify
certificate: x509: certificate has expired or is not yet valid: current
time 2024-02-21T07:35:17Z is after 2024-02-16T07:25:21Z:
https://drazzy.com/package_drazzy.com_index.json
Not quite sure which end error is... can anyone assist?
DId I use the right URL (seems to be OK in browser...) Is there a
workaround? (Sorta Arduino IDE *n00b*, me...)
—
Reply to this email directly, view it on GitHub
<#846>, or
unsubscribe
<https://github.com/notifications/unsubscribe-auth/ABTXEWZ2V6OCM37LC4ZI5DLYUWQGHAVCNFSM6AAAAABDSQZMROVHI2DSMVQWIX3LMV43ERDJONRXK43TNFXW4OZWGI2DONBZGE>
.
You are receiving this because you are subscribed to this thread.Message
ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
0 replies
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Uh oh!
There was an error while loading. Please reload this page.
Uh oh!
There was an error while loading. Please reload this page.
-
Hello. When I add the URL:
https://drazzy.com/package_drazzy.com_index.jsonto the ArdIDE 2.3.2 boards manager, I get the following in response:Not quite sure which end error is... can anyone assist?
DId I use the right URL (seems to be OK in browser...) Is there a workaround? (Sorta Arduino IDE n00b, me...)
*** edit *** I did try :
http://drazzy.com/package_drazzy.com_index.jsonfirst, and again after, but the message is (almost) the same (note first reference still contains the 'httpsecure' prefix.)Beta Was this translation helpful? Give feedback.
All reactions