Uploading large program (~70kb) fails using httpclient

[Park0]

I have a mega2560 and a w5500. Those are connected to MQTT. So i can trigger a update using a MQTT command. I used the code from the advanced example using httpclient.
It works fine if i flash a small program. But if i try to program i made ~71kb it fails to boot afterwards. I can upload the bin file using avrdude and it works/boots just fine.

[JAndrassy]

Hi. did you try the basic upload example OTEthernet? Can you code a download without HttpClient?

[Park0]

Ill try them both and report back thx

[Park0]

I can upload it using the example. Ill have to try rewriting the code exclude the httpclient. It will take more time to try.

[Park0]

I think i found the issue. I copy/pasted the example too much :D, having a new instance of EthernetClient for the download messed everything up i guess.
Thanks for your time making this nice library

[Park0]

@JAndrassy
I have to correct myself. The main cause was the length in the httpclient. I fixed it here: arduino-libraries/ArduinoHttpClient#90
I made a example for me to test it. I also added as a PR #37 so i can be of use to someone else. It's a bit quick & dirty bit it will show how it works.

[JAndrassy]

yes, sorry, now I remembered about the problem with int for content-length