Update 5.4-2.1.x-imx to v5.4.58 from stable + cherry-pick merge fix for 5.4.52 #105
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
commit d2a4309 upstream. When running qmi-firmware-update on the Sierra Wireless EM7305 in a Toshiba laptop, it changed product ID to 0x9062 when entering QDL mode: usb 2-4: new high-speed USB device number 78 using xhci_hcd usb 2-4: New USB device found, idVendor=1199, idProduct=9062, bcdDevice= 0.00 usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-4: Product: EM7305 usb 2-4: Manufacturer: Sierra Wireless, Incorporated The upgrade could complete after running # echo 1199 9062 > /sys/bus/usb-serial/drivers/qcserial/new_id qcserial 2-4:1.0: Qualcomm USB modem converter detected usb 2-4: Qualcomm USB modem converter now attached to ttyUSB0 Signed-off-by: Erik Ekman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 90c91df upstream. Kan and Andi reported that we fail to kill rotation when the flexible events go empty, but the context does not. XXX moar Fixes: fd7d551 ("perf/cgroups: Don't rotate events for cgroups unnecessarily") Reported-by: Andi Kleen <[email protected]> Reported-by: Kan Liang <[email protected]> Tested-by: Kan Liang <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Link: https://lkml.kernel.org/r/[email protected] Cc: Robin Murphy <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 17a8271 upstream. In previous patches that added support for new iowarrior devices, the handling of the report size was not done correct. Fix that up and update the copyright date for the driver Reworked from an original patch written by Christoph Jung. Fixes: bab5417 ("USB: misc: iowarrior: add support for the 100 device") Fixes: 5f6f8da ("USB: misc: iowarrior: add support for the 28 and 28L devices") Fixes: 461d8de ("USB: misc: iowarrior: add support for 2 OEMed devices") Cc: stable <[email protected]> Reported-by: Christoph Jung <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 1841cb2 upstream. Not all ASMedia host controllers have a device ID that matches its part number. #define some of these IDs to make it clearer at a glance which chips require what quirks. Acked-by: Mathias Nyman <[email protected]> Signed-off-by: Forest Crossman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit ec37198 upstream. I've confirmed that the ASMedia ASM1142 has the same problem as the ASM2142/ASM3142, in that it too reports that it supports 64-bit DMA addresses when in fact it does not. As with the ASM2142/ASM3142, this can cause problems on systems where the upper bits matter, and adding the XHCI_NO_64BIT_SUPPORT quirk completely fixes the issue. Acked-by: Mathias Nyman <[email protected]> Signed-off-by: Forest Crossman <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Liu reports that he can trigger a NULL pointer dereference with IORING_OP_SENDMSG, by changing the sqe->opcode after we've validated that the previous opcode didn't need a file and didn't assign one. Ensure we validate and read the opcode only once. Reported-by: Liu Yong <[email protected]> Tested-by: Liu Yong <[email protected]> Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
when ctx->sqo_mm is zero, io_sq_wq_submit_work() frees 'req' without deleting it from 'task_list'. After that, 'req' is accessed in io_ring_ctx_wait_and_kill() which lead to a use-after-free. Signed-off-by: Guoyu Huang <[email protected]> Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 07c9983 upstream. This reverts commit 9a64184 ("ALSA: hda: call runtime_allow() for all hda controllers"). The reverted patch already introduced some regressions on some machines: - on gemini-lake machines, the error of "azx_get_response timeout" happens in the hda driver. - on the machines with alc662 codec, the audio jack detection doesn't work anymore. Fixes: 9a64184 ("ALSA: hda: call runtime_allow() for all hda controllers") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208511 Cc: <[email protected]> Signed-off-by: Hui Wang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit f1ec5be upstream. There are several Loongson-3 based laptops produced by CZC or Lemote, they use alc269/alc662 codecs and need specific pin-tables, this patch add their pin-tables. Signed-off-by: Huacai Chen <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit cc5edb1 upstream. Add a new quirk ID for the Recon3D, as tested by me. Signed-off-by: Connor McAdams <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit a00dc40 upstream. When the ZxR headphone gain control was added, the ca0132_switch_get function was not updated, which meant that the changes to the control state were not saved when entering/exiting alsamixer. Signed-off-by: Connor McAdams <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 7fe3530 upstream. The ca0113 command had the wrong group_id, 0x48 when it should've been 0x30. The front microphone selection should now work. Signed-off-by: Connor McAdams <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 80982c7 upstream. Some ioctls via OSS sequencer API may race and lead to UAF when the port create and delete are performed concurrently, as spotted by a couple of syzkaller cases. This patch is an attempt to address it by serializing the ioctls with the existing register_mutex. Basically OSS sequencer API is an obsoleted interface and was designed without much consideration of the concurrency. There are very few applications with it, and the concurrent performance isn't asked, hence this "big hammer" approach should be good enough. Reported-by: [email protected] Reported-by: [email protected] Suggested-by: Hillf Danton <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 3e338d3 upstream. syzbot report [1] describes a deadlock when write operation against an ashmem fd executed at the time when ashmem is shrinking its cache results in the following lock sequence: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); lock(&sb->s_type->i_mutex_key#13); lock(fs_reclaim); lock(&sb->s_type->i_mutex_key#13); kswapd takes fs_reclaim and then inode_lock while generic_perform_write takes inode_lock and then fs_reclaim. However ashmem does not support writing into backing shmem with a write syscall. The only way to change its content is to mmap it and operate on mapped memory. Therefore the race that lockdep is warning about is not valid. Resolve this by introducing a separate lockdep class for the backing shmem inodes. [1]: https://lkml.kernel.org/lkml/[email protected]/ Reported-by: [email protected] Signed-off-by: Suren Baghdasaryan <[email protected]> Cc: stable <[email protected]> Reviewed-by: Joel Fernandes (Google) <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit b4383c9 upstream. when firmware fails to load we should not call unregister_netdev() this patch fixes a race condition between rtl871x_load_fw_cb() and r871xu_dev_remove() and fixes the bug reported by syzbot Reported-by: [email protected] Link: https://syzkaller.appspot.com/bug?extid=80899a8a8efe8968cde7 Signed-off-by: Rustam Kovhaev <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 1153644 upstream. The variable authmode can be uninitialized. The danger would be if it equals to _WPA_IE_ID_ (0xdd) or _WPA2_IE_ID_ (0x33). We can avoid this by setting it to zero instead. This is the approach that was used in the rtl8723bs driver. Fixes: 7b464c9 ("staging: r8188eu: Add files for new driver - part 4") Co-developed-by: Dan Carpenter <[email protected]> Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Dinghao Liu <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
…_evt() commit 51c19bf upstream. Check upon `num_rsp` is insufficient. A malformed event packet with a large `num_rsp` number makes hci_extended_inquiry_result_evt() go out of bounds. Fix it. This patch fixes the following syzbot bug: https://syzkaller.appspot.com/bug?id=4bf11aa05c4ca51ce0df86e500fce486552dc8d2 Reported-by: [email protected] Cc: [email protected] Signed-off-by: Peilin Ye <[email protected]> Acked-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 75bbd2e upstream. Check `num_rsp` before using it as for-loop counter. Cc: [email protected] Signed-off-by: Peilin Ye <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
…_evt() commit 629b49c upstream. Check `num_rsp` before using it as for-loop counter. Add `unlock` label. Cc: [email protected] Signed-off-by: Peilin Ye <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 254503a upstream. The drm/omap driver was fixed to correct an issue where using a divider of 32 breaks the DSS despite the TRM stating 32 is a valid number. Through experimentation, it appears that 31 works, and it is consistent with the value used by the drm/omap driver. This patch fixes the divider for fbdev driver instead of the drm. Fixes: f76ee89 ("omapfb: copy omapdss & displays for omapfb") Cc: <[email protected]> Freescale#4.5+ Signed-off-by: Adam Ford <[email protected]> Reviewed-by: Tomi Valkeinen <[email protected]> Cc: Dave Airlie <[email protected]> Cc: Rob Clark <[email protected]> [b.zolnierkie: mark patch as applicable to stable 4.5+ (was 4.9+)] Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 4b836a1 upstream. Binder is designed such that a binder_proc never has references to itself. If this rule is violated, memory corruption can occur when a process sends a transaction to itself; see e.g. <https://syzkaller.appspot.com/bug?extid=09e05aba06723a94d43d>. There is a remaining edgecase through which such a transaction-to-self can still occur from the context of a task with BINDER_SET_CONTEXT_MGR access: - task A opens /dev/binder twice, creating binder_proc instances P1 and P2 - P1 becomes context manager - P2 calls ACQUIRE on the magic handle 0, allocating index 0 in its handle table - P1 dies (by closing the /dev/binder fd and waiting a bit) - P2 becomes context manager - P2 calls ACQUIRE on the magic handle 0, allocating index 1 in its handle table [this triggers a warning: "binder: 1974:1974 tried to acquire reference to desc 0, got 1 instead"] - task B opens /dev/binder once, creating binder_proc instance P3 - P3 calls P2 (via magic handle 0) with (void*)1 as argument (two-way transaction) - P2 receives the handle and uses it to call P3 (two-way transaction) - P3 calls P2 (via magic handle 0) (two-way transaction) - P2 calls P2 (via handle 1) (two-way transaction) And then, if P2 does *NOT* accept the incoming transaction work, but instead closes the binder fd, we get a crash. Solve it by preventing the context manager from using ACQUIRE on ref 0. There shouldn't be any legitimate reason for the context manager to do that. Additionally, print a warning if someone manages to find another way to trigger a transaction-to-self bug in the future. Cc: [email protected] Fixes: 457b9a6 ("Staging: android: add binder driver") Acked-by: Todd Kjos <[email protected]> Signed-off-by: Jann Horn <[email protected]> Reviewed-by: Martijn Coenen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit beb4ee6 upstream. smk_write_relabel_self() frees memory from the task's credentials with no locking, which can easily cause a use-after-free because multiple tasks can share the same credentials structure. Fix this by using prepare_creds() and commit_creds() to correctly modify the task's credentials. Reproducer for "BUG: KASAN: use-after-free in smk_write_relabel_self": #include <fcntl.h> #include <pthread.h> #include <unistd.h> static void *thrproc(void *arg) { int fd = open("/sys/fs/smackfs/relabel-self", O_WRONLY); for (;;) write(fd, "foo", 3); } int main() { pthread_t t; pthread_create(&t, NULL, thrproc, NULL); thrproc(NULL); } Reported-by: [email protected] Fixes: 38416e5 ("Smack: limited capability for changing process label") Cc: <[email protected]> # v4.4+ Signed-off-by: Eric Biggers <[email protected]> Signed-off-by: Casey Schaufler <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 55c7549 upstream. When running `make coccicheck` in report mode using the add_namespace.cocci file, it will fail for files that contain MODULE_LICENSE. Those match the replacement precondition, but spatch errors out as virtual.ns is not set. In order to fix that, add the virtual rule nsdeps and only do search and replace if that rule has been explicitly requested. In order to make spatch happy in report mode, we also need a dummy rule, as otherwise it errors out with "No rules apply". Using a script:python rule appears unrelated and odd, but this is the shortest I could come up with. Adjust scripts/nsdeps accordingly to set the nsdeps rule when run trough `make nsdeps`. Suggested-by: Julia Lawall <[email protected]> Fixes: c7c4e29 ("scripts: add_namespace: Fix coccicheck failed") Cc: YueHaibing <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: Matthias Maennich <[email protected]> Reported-by: Shuah Khan <[email protected]> Acked-by: Julia Lawall <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit ebfdfee upstream. vgacon_scrollback_update() always leaves enbough room in the scrollback buffer for the next call, but if the console size changed that room might not actually be enough, and so we need to re-check. The check should be in the loop since vgacon_scrollback_cur->tail is updated in the loop and count may be more than 1 when triggered by CSI M, as Jiri's PoC: #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <sys/types.h> #include <sys/stat.h> #include <sys/ioctl.h> #include <fcntl.h> int main(int argc, char** argv) { int fd = open("/dev/tty1", O_RDWR); unsigned short size[3] = {25, 200, 0}; ioctl(fd, 0x5609, size); // VT_RESIZE write(fd, "\e[1;1H", 6); for (int i = 0; i < 30; i++) write(fd, "\e[10M", 5); } It leads to various crashes as vgacon_scrollback_update writes out of the buffer: BUG: unable to handle page fault for address: ffffc900001752a0 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page RIP: 0010:mutex_unlock+0x13/0x30 ... Call Trace: n_tty_write+0x1a0/0x4d0 tty_write+0x1a0/0x2e0 Or to KASAN reports: BUG: KASAN: slab-out-of-bounds in vgacon_scroll+0x57a/0x8ed This fixes CVE-2020-14331. Reported-by: 张云海 <[email protected]> Reported-by: Yang Yingliang <[email protected]> Reported-by: Kyungtae Kim <[email protected]> Fixes: 15bdab9 ([PATCH] vgacon: Add support for soft scrollback) Cc: [email protected] Cc: [email protected] Cc: Linus Torvalds <[email protected]> Cc: Solar Designer <[email protected]> Cc: "Srivatsa S. Bhat" <[email protected]> Cc: Anthony Liguori <[email protected]> Cc: Yang Yingliang <[email protected]> Cc: Bartlomiej Zolnierkiewicz <[email protected]> Cc: Jiri Slaby <[email protected]> Signed-off-by: Yunhai Zhang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit f7e6b19 upstream. When doing a "write" ioctl call, properly check that we have permissions to do so before copying anything from userspace or anything else so we can "fail fast". This includes also covering the MEMWRITE ioctl which previously missed checking for this. Cc: Miquel Raynal <[email protected]> Cc: Richard Weinberger <[email protected]> Cc: Vignesh Raghavendra <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> [rw: Fixed locking issue] Signed-off-by: Richard Weinberger <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 47a459e upstream. Several MFD child drivers register their class devices directly under the parent device. This means you cannot blindly do devres conversions so that deregistration ends up being tied to the parent device, something which leads to use-after-free on driver unbind when the class device is released while still being registered. Fixes: 8d3b6a4 ("leds: wm831x-status: Use devm_led_classdev_register") Cc: stable <[email protected]> # 4.6 Cc: Amitoj Kaur Chawla <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Pavel Machek <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit a0972ff upstream. Several MFD child drivers register their class devices directly under the parent device. This means you cannot use devres so that deregistration ends up being tied to the parent device, something which leads to use-after-free on driver unbind when the class device is released while still being registered. Fixes: 11e1bbc ("leds: lm36274: Introduce the TI LM36274 LED driver") Cc: stable <[email protected]> # 5.3 Cc: Dan Murphy <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Pavel Machek <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 6f4aa35 upstream. Several MFD child drivers register their class devices directly under the parent device. This means you cannot blindly do devres conversions so that deregistration ends up being tied to the parent device, something which leads to use-after-free on driver unbind when the class device is released while still being registered. Fixes: eed1625 ("leds: da903x: Use devm_led_classdev_register") Cc: stable <[email protected]> # 4.6 Cc: Amitoj Kaur Chawla <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Pavel Machek <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit d584221 upstream. Several MFD child drivers register their class devices directly under the parent device. This means you cannot blindly do devres conversions so that deregistration ends up being tied to the parent device, something which leads to use-after-free on driver unbind when the class device is released while still being registered. Fixes: 50154e2 ("leds: lm3533: Use devm_led_classdev_register") Cc: stable <[email protected]> # 4.6 Cc: Amitoj Kaur Chawla <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Pavel Machek <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit eca21c2 upstream. Several MFD child drivers register their class devices directly under the parent device. This means you cannot blindly do devres conversions so that deregistration ends up being tied to the parent device, something which leads to use-after-free on driver unbind when the class device is released while still being registered. Fixes: 375446d ("leds: 88pm860x: Use devm_led_classdev_register") Cc: stable <[email protected]> # 4.6 Cc: Amitoj Kaur Chawla <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Pavel Machek <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 4052d3d ] In the case where a vendor command does not implement doit, and has no flags set, doit would not be validated and a NULL pointer dereference would occur, for example when invoking the vendor command via iw. I encountered this while developing new vendor commands. Perhaps in practice it is advisable to always implement doit along with dumpit, but it seems reasonable to me to always check doit anyway, not just when NEED_WDEV. Signed-off-by: Julian Squires <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 024a816 ] We observed two panics involving races with igb_reset_task. The first panic is caused by this race condition: kworker reboot -f igb_reset_task igb_reinit_locked igb_down napi_synchronize __igb_shutdown igb_clear_interrupt_scheme igb_free_q_vectors igb_free_q_vector adapter->q_vector[v_idx] = NULL; napi_disable Panics trying to access adapter->q_vector[v_idx].napi_state The second panic (a divide error) is caused by this race: kworker reboot -f tx packet igb_reset_task __igb_shutdown rtnl_lock() ... igb_clear_interrupt_scheme igb_free_q_vectors adapter->num_tx_queues = 0 ... rtnl_unlock() rtnl_lock() igb_reinit_locked igb_down igb_up netif_tx_start_all_queues dev_hard_start_xmit igb_xmit_frame igb_tx_queue_mapping Panics on r_idx % adapter->num_tx_queues This commit applies to igb_reset_task the same changes that were applied to ixgbe in commit 2f90b86 ("ixgbe: this patch adds support for DCB to the kernel and ixgbe driver"), commit 8f4c5c9 ("ixgbe: reinit_locked() should be called with rtnl_lock") and commit 88adce4 ("ixgbe: fix possible race in reset subtask"). Signed-off-by: Francesco Ruggeri <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 51875da ] atmtcp_remove_persistent() invokes atm_dev_lookup(), which returns a reference of atm_dev with increased refcount or NULL if fails. The refcount leaks issues occur in two error handling paths. If dev_data->persist is zero or PRIV(dev)->vcc isn't NULL, the function returns 0 without decreasing the refcount kept by a local variable, resulting in refcount leaks. Fix the issue by adding atm_dev_put() before returning 0 both when dev_data->persist is zero or PRIV(dev)->vcc isn't NULL. Signed-off-by: Xin Xiong <[email protected]> Signed-off-by: Xiyu Yang <[email protected]> Signed-off-by: Xin Tan <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit e24c644 ] I compiled with AddressSanitizer and I had these memory leaks while I was using the tep_parse_format function: Direct leak of 28 byte(s) in 4 object(s) allocated from: #0 0x7fb07db49ffe in __interceptor_realloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10dffe) Freescale#1 0x7fb07a724228 in extend_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:985 Freescale#2 0x7fb07a724c21 in __read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1140 Freescale#3 0x7fb07a724f78 in read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1206 Freescale#4 0x7fb07a725191 in __read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1291 Freescale#5 0x7fb07a7251df in read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1299 Freescale#6 0x7fb07a72e6c8 in process_dynamic_array_len /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:2849 Freescale#7 0x7fb07a7304b8 in process_function /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3161 Freescale#8 0x7fb07a730900 in process_arg_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3207 Freescale#9 0x7fb07a727c0b in process_arg /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1786 Freescale#10 0x7fb07a731080 in event_read_print_args /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3285 Freescale#11 0x7fb07a731722 in event_read_print /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3369 Freescale#12 0x7fb07a740054 in __tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6335 Freescale#13 0x7fb07a74047a in __parse_event /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6389 Freescale#14 0x7fb07a740536 in tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6431 Freescale#15 0x7fb07a785acf in parse_event ../../../src/fs-src/fs.c:251 Freescale#16 0x7fb07a785ccd in parse_systems ../../../src/fs-src/fs.c:284 Freescale#17 0x7fb07a786fb3 in read_metadata ../../../src/fs-src/fs.c:593 Freescale#18 0x7fb07a78760e in ftrace_fs_source_init ../../../src/fs-src/fs.c:727 Freescale#19 0x7fb07d90c19c in add_component_with_init_method_data ../../../../src/lib/graph/graph.c:1048 Freescale#20 0x7fb07d90c87b in add_source_component_with_initialize_method_data ../../../../src/lib/graph/graph.c:1127 Freescale#21 0x7fb07d90c92a in bt_graph_add_source_component ../../../../src/lib/graph/graph.c:1152 Freescale#22 0x55db11aa632e in cmd_run_ctx_create_components_from_config_components ../../../src/cli/babeltrace2.c:2252 Freescale#23 0x55db11aa6fda in cmd_run_ctx_create_components ../../../src/cli/babeltrace2.c:2347 Freescale#24 0x55db11aa780c in cmd_run ../../../src/cli/babeltrace2.c:2461 Freescale#25 0x55db11aa8a7d in main ../../../src/cli/babeltrace2.c:2673 Freescale#26 0x7fb07d5460b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2) The token variable in the process_dynamic_array_len function is allocated in the read_expect_type function, but is not freed before calling the read_token function. Free the token variable before calling read_token in order to plug the leak. Signed-off-by: Philippe Duplessis-Guindon <[email protected]> Reviewed-by: Steven Rostedt (VMware) <[email protected]> Link: https://lore.kernel.org/linux-trace-devel/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit ddc9d35 ] When a Linux hv_sock app tries to connect to a Service GUID on which no host app is listening, a recent host (RS3+) sends a CHANNELMSG_TL_CONNECT_RESULT (23) message to Linux and this triggers such a warning: unknown msgtype=23 WARNING: CPU: 2 PID: 0 at drivers/hv/vmbus_drv.c:1031 vmbus_on_msg_dpc Actually Linux can safely ignore the message because the Linux app's connect() will time out in 2 seconds: see VSOCK_DEFAULT_CONNECT_TIMEOUT and vsock_stream_connect(). We don't bother to make use of the message because: 1) it's only supported on recent hosts; 2) a non-trivial effort is required to use the message in Linux, but the benefit is small. So, let's not see the warning by silently ignoring the message. Signed-off-by: Dexuan Cui <[email protected]> Reviewed-by: Michael Kelley <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
commit 08b5d50 upstream. set/removexattr on an exported filesystem should break NFS delegations. This is true in general, but also for the upcoming support for RFC 8726 (NFSv4 extended attribute support). Make sure that they do. Additionally, they need to grow a _locked variant, since callers might call this with i_rwsem held (like the NFS server code). Cc: [email protected] # v4.9+ Cc: [email protected] Cc: Al Viro <[email protected]> Signed-off-by: Frank van der Linden <[email protected]> Signed-off-by: Chuck Lever <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit b506923 upstream. This reverts commit d2a91ce. This commit moved too much work in kasan_init(). The allocation of shadow pages has to be moved for the reason explained in that patch, but the allocation of page tables still need to be done before switching to the final hash table. First revert the incorrect commit, following patch redoes it properly. Fixes: d2a91ce ("powerpc/kasan: Fix shadow pages allocation failure") Cc: [email protected] Reported-by: Erhard F. <[email protected]> Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://bugzilla.kernel.org/show_bug.cgi?id=208181 Link: https://lore.kernel.org/r/3667deb0911affbf999b99f87c31c77d5e870cd2.1593690707.git.christophe.leroy@csgroup.eu Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit e7b856d upstream. As reported in https://bugzilla.kernel.org/206217 , raw_violation_fixup is causing more harm than good in some common use-cases. This patch is a partial revert of commit: 191cd6f ("PCI: tegra: Add SW fixup for RAW violations") and fixes the following regression since then. * Description: When both the NIC and MMC are used one can see the following message: NETDEV WATCHDOG: enp1s0 (r8169): transmit queue 0 timed out and pcieport 0000:00:02.0: AER: Uncorrected (Non-Fatal) error received: 0000:01:00.0 r8169 0000:01:00.0: AER: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Requester ID) r8169 0000:01:00.0: AER: device [10ec:8168] error status/mask=00004000/00400000 r8169 0000:01:00.0: AER: [14] CmpltTO (First) r8169 0000:01:00.0: AER: can't recover (no error_detected callback) pcieport 0000:00:02.0: AER: device recovery failed After that, the ethernet NIC is not functional anymore even after reloading the r8169 module. After a reboot, this is reproducible by copying a large file over the NIC to the MMC. For some reason this is not reproducible when files are copied to a tmpfs. * Little background on the fixup, by Manikanta Maddireddy: "In the internal testing with dGPU on Tegra124, CmplTO is reported by dGPU. This happened because FIFO queue in AFI(AXI to PCIe) module get full by upstream posted writes. Back to back upstream writes interleaved with infrequent reads, triggers RAW violation and CmpltTO. This is fixed by reducing the posted write credits and by changing updateFC timer frequency. These settings are fixed after stress test. In the current case, RTL NIC is also reporting CmplTO. These settings seems to be aggravating the issue instead of fixing it." Link: https://lore.kernel.org/r/[email protected] Fixes: 191cd6f ("PCI: tegra: Add SW fixup for RAW violations") Signed-off-by: Nicolas Chauvet <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Reviewed-by: Manikanta Maddireddy <[email protected]> Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 83f3522 ] fib_trie_unmerge() is called with RTNL held, but not from an RCU read-side critical section. This leads to the following warning [1] when the FIB alias list in a leaf is traversed with hlist_for_each_entry_rcu(). Since the function is always called with RTNL held and since modification of the list is protected by RTNL, simply use hlist_for_each_entry() and silence the warning. [1] WARNING: suspicious RCU usage 5.8.0-rc4-custom-01520-gc1f937f3f83b Freescale#30 Not tainted ----------------------------- net/ipv4/fib_trie.c:1867 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by ip/164: #0: ffffffff85a27850 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x49a/0xbd0 stack backtrace: CPU: 0 PID: 164 Comm: ip Not tainted 5.8.0-rc4-custom-01520-gc1f937f3f83b Freescale#30 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack+0x100/0x184 lockdep_rcu_suspicious+0x153/0x15d fib_trie_unmerge+0x608/0xdb0 fib_unmerge+0x44/0x360 fib4_rule_configure+0xc8/0xad0 fib_nl_newrule+0x37a/0x1dd0 rtnetlink_rcv_msg+0x4f7/0xbd0 netlink_rcv_skb+0x17a/0x480 rtnetlink_rcv+0x22/0x30 netlink_unicast+0x5ae/0x890 netlink_sendmsg+0x98a/0xf40 ____sys_sendmsg+0x879/0xa00 ___sys_sendmsg+0x122/0x190 __sys_sendmsg+0x103/0x1d0 __x64_sys_sendmsg+0x7d/0xb0 do_syscall_64+0x54/0xa0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fc80a234e97 Code: Bad RIP value. RSP: 002b:00007ffef8b66798 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fc80a234e97 RDX: 0000000000000000 RSI: 00007ffef8b66800 RDI: 0000000000000003 RBP: 000000005f141b1c R08: 0000000000000001 R09: 0000000000000000 R10: 00007fc80a2a8ac0 R11: 0000000000000246 R12: 0000000000000001 R13: 0000000000000000 R14: 00007ffef8b67008 R15: 0000556fccb10020 Fixes: 0ddcf43 ("ipv4: FIB Local/MAIN table collapse") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 8c0de6e ] IPV6_ADDRFORM causes resource leaks when converting an IPv6 socket to IPv4, particularly struct ipv6_ac_socklist. Similar to struct ipv6_mc_socklist, we should just close it on this path. This bug can be easily reproduced with the following C program: #include <stdio.h> #include <string.h> #include <sys/types.h> #include <sys/socket.h> #include <arpa/inet.h> int main() { int s, value; struct sockaddr_in6 addr; struct ipv6_mreq m6; s = socket(AF_INET6, SOCK_DGRAM, 0); addr.sin6_family = AF_INET6; addr.sin6_port = htons(5000); inet_pton(AF_INET6, "::ffff:192.168.122.194", &addr.sin6_addr); connect(s, (struct sockaddr *)&addr, sizeof(addr)); inet_pton(AF_INET6, "fe80::AAAA", &m6.ipv6mr_multiaddr); m6.ipv6mr_interface = 5; setsockopt(s, SOL_IPV6, IPV6_JOIN_ANYCAST, &m6, sizeof(m6)); value = AF_INET; setsockopt(s, SOL_IPV6, IPV6_ADDRFORM, &value, sizeof(value)); close(s); return 0; } Reported-by: [email protected] Fixes: 1da177e ("Linux-2.6.12-rc2") Signed-off-by: Cong Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 706ec91 ] ip6_route_info_create() invokes nexthop_get(), which increases the refcount of the "nh". When ip6_route_info_create() returns, local variable "nh" becomes invalid, so the refcount should be decreased to keep refcount balanced. The reference counting issue happens in one exception handling path of ip6_route_info_create(). When nexthops can not be used with source routing, the function forgets to decrease the refcnt increased by nexthop_get(), causing a refcnt leak. Fix this issue by pulling up the error source routing handling when nexthops can not be used with source routing. Fixes: f88d8ea ("ipv6: Plumb support for nexthop object in a fib6_info") Signed-off-by: Xiyu Yang <[email protected]> Signed-off-by: Xin Tan <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 555a893 ] in recent kernel versions there are warnings about incorrect MTU size like these: eth0: mtu greater than device maximum mtk_soc_eth 1b100000.ethernet eth0: error -22 setting MTU to include DSA overhead Fixes: bfcb813 ("net: dsa: configure the MTU for switch ports") Fixes: 72579e1 ("net: dsa: don't fail to probe if we couldn't set the MTU") Fixes: 7a4c53b ("net: report invalid mtu value via netlink extack") Signed-off-by: Landen Chao <[email protected]> Signed-off-by: Frank Wunderlich <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 6555009 ] There's a race between rxrpc_sendmsg setting up a call, but then failing to send anything on it due to an error, and recvmsg() seeing the call completion occur and trying to return the state to the user. An assertion fails in rxrpc_recvmsg() because the call has already been released from the socket and is about to be released again as recvmsg deals with it. (The recvmsg_q queue on the socket holds a ref, so there's no problem with use-after-free.) We also have to be careful not to end up reporting an error twice, in such a way that both returns indicate to userspace that the user ID supplied with the call is no longer in use - which could cause the client to malfunction if it recycles the user ID fast enough. Fix this by the following means: (1) When sendmsg() creates a call after the point that the call has been successfully added to the socket, don't return any errors through sendmsg(), but rather complete the call and let recvmsg() retrieve them. Make sendmsg() return 0 at this point. Further calls to sendmsg() for that call will fail with ESHUTDOWN. Note that at this point, we haven't send any packets yet, so the server doesn't yet know about the call. (2) If sendmsg() returns an error when it was expected to create a new call, it means that the user ID wasn't used. (3) Mark the call disconnected before marking it completed to prevent an oops in rxrpc_release_call(). (4) recvmsg() will then retrieve the error and set MSG_EOR to indicate that the user ID is no longer known by the kernel. An oops like the following is produced: kernel BUG at net/rxrpc/recvmsg.c:605! ... RIP: 0010:rxrpc_recvmsg+0x256/0x5ae ... Call Trace: ? __init_waitqueue_head+0x2f/0x2f ____sys_recvmsg+0x8a/0x148 ? import_iovec+0x69/0x9c ? copy_msghdr_from_user+0x5c/0x86 ___sys_recvmsg+0x72/0xaa ? __fget_files+0x22/0x57 ? __fget_light+0x46/0x51 ? fdget+0x9/0x1b do_recvmmsg+0x15e/0x232 ? _raw_spin_unlock+0xa/0xb ? vtime_delta+0xf/0x25 __x64_sys_recvmmsg+0x2c/0x2f do_syscall_64+0x4c/0x78 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 357f5ef ("rxrpc: Call rxrpc_release_call() on error in rxrpc_new_client_call()") Reported-by: [email protected] Signed-off-by: David Howells <[email protected]> Reviewed-by: Marc Dionne <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit b514191 ] The commit cited below removed the RCU read-side critical section from rtnl_fdb_dump() which means that the ndo_fdb_dump() callback is invoked without RCU protection. This results in the following warning [1] in the VXLAN driver, which relied on the callback being invoked from an RCU read-side critical section. Fix this by calling rcu_read_lock() in the VXLAN driver, as already done in the bridge driver. [1] WARNING: suspicious RCU usage 5.8.0-rc4-custom-01521-g481007553ce6 Freescale#29 Not tainted ----------------------------- drivers/net/vxlan.c:1379 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by bridge/166: #0: ffffffff85a27850 (rtnl_mutex){+.+.}-{3:3}, at: netlink_dump+0xea/0x1090 stack backtrace: CPU: 1 PID: 166 Comm: bridge Not tainted 5.8.0-rc4-custom-01521-g481007553ce6 Freescale#29 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack+0x100/0x184 lockdep_rcu_suspicious+0x153/0x15d vxlan_fdb_dump+0x51e/0x6d0 rtnl_fdb_dump+0x4dc/0xad0 netlink_dump+0x540/0x1090 __netlink_dump_start+0x695/0x950 rtnetlink_rcv_msg+0x802/0xbd0 netlink_rcv_skb+0x17a/0x480 rtnetlink_rcv+0x22/0x30 netlink_unicast+0x5ae/0x890 netlink_sendmsg+0x98a/0xf40 __sys_sendto+0x279/0x3b0 __x64_sys_sendto+0xe6/0x1a0 do_syscall_64+0x54/0xa0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fe14fa2ade0 Code: Bad RIP value. RSP: 002b:00007fff75bb5b88 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00005614b1ba0020 RCX: 00007fe14fa2ade0 RDX: 000000000000011c RSI: 00007fff75bb5b90 RDI: 0000000000000003 RBP: 00007fff75bb5b90 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00005614b1b89160 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Fixes: 5e6d243 ("bridge: netlink dump interface at par with brctl") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit ea060b3 ] Drop the bogus endpoint-lookup helper which could end up accepting interfaces based on endpoints belonging to unrelated altsettings. Note that the returned bulk pipes and interrupt endpoint descriptor were never actually used. Instead the bulk-endpoint numbers are hardcoded to 1 and 2 (matching the specification), while the interrupt- endpoint descriptor was assumed to be the third descriptor created by USB core. Try to bring some order to this by dropping the bogus lookup helper and adding the missing endpoint sanity checks while keeping the interrupt- descriptor assumption for now. Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit d0f6ba2 ] Add a missing return statement to atalk_proc_init so it doesn't return -ENOMEM when successful. This allows the appletalk module to load properly. Fixes: e2bcd8b ("appletalk: use remove_proc_subtree to simplify procfs code") Link: https://www.downtowndougbrown.com/2020/08/hacking-up-a-fix-for-the-broken-appletalk-kernel-module-in-linux-5-1-and-newer/ Reported-by: Christopher KOBAYASHI <[email protected]> Reported-by: Doug Brown <[email protected]> Signed-off-by: Vincent Duvert <[email protected]> [lukas: add missing tags] Signed-off-by: Lukas Wunner <[email protected]> Cc: [email protected] # v5.1+ Cc: Yue Haibing <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 02afa9c ] Fix smatch warning: drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c:2419 alloc_channel() warn: passing zero to 'ERR_PTR' setup_dpcon() should return ERR_PTR(err) instead of zero in error handling case. Fixes: d7f5a9d ("dpaa2-eth: defer probe on object allocate") Signed-off-by: YueHaibing <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 7c9864b ] If the accelerated networking SRIOV VF device has lost carrier use the synthetic network device which is available as backup path. This is a rare case since if VF link goes down, normally the VMBus device will also loose external connectivity as well. But if the communication is between two VM's on the same host the VMBus device will still work. Reported-by: "Shah, Ashish N" <[email protected]> Fixes: 0c19556 ("netvsc: transparent VF management") Signed-off-by: Stephen Hemminger <[email protected]> Reviewed-by: Haiyang Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 622e32b ] The GRE tunnel can be used to transport traffic that does not rely on a Internet checksum (e.g. SCTP). The issue can be triggered creating a GRE or GRETAP tunnel and transmitting SCTP traffic ontop of it where CRC offload has been disabled. In order to fix the issue we need to recompute the GRE csum in gre_gso_segment() not relying on the inner checksum. The issue is still present when we have the CRC offload enabled. In this case we need to disable the CRC offload if we require GRE checksum since otherwise skb_checksum() will report a wrong value. Fixes: 90017ac ("sctp: Add GSO support") Signed-off-by: Lorenzo Bianconi <[email protected]> Reviewed-by: Marcelo Ricardo Leitner <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit bab9693 ] A dead lock was triggered on thunderx driver: CPU0 CPU1 ---- ---- [01] lock(&(&nic->rx_mode_wq_lock)->rlock); [11] lock(&(&mc->mca_lock)->rlock); [12] lock(&(&nic->rx_mode_wq_lock)->rlock); [02] <Interrupt> lock(&(&mc->mca_lock)->rlock); The path for each is: [01] worker_thread() -> process_one_work() -> nicvf_set_rx_mode_task() [02] mld_ifc_timer_expire() [11] ipv6_add_dev() -> ipv6_dev_mc_inc() -> igmp6_group_added() -> [12] dev_mc_add() -> __dev_set_rx_mode() -> nicvf_set_rx_mode() To fix it, it needs to disable bh on [1], so that the timer on [2] wouldn't be triggered until rx_mode_wq_lock is released. So change to use spin_lock_bh() instead of spin_lock(). Thanks to Paolo for helping with this. v1->v2: - post to netdev. Reported-by: Rafael P. <[email protected]> Tested-by: Dean Nelson <[email protected]> Fixes: 469998c ("net: thunderx: prevent concurrent data re-writing by nicvf_set_rx_mode") Signed-off-by: Xin Long <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 9aba6c5 ] ovs_ct_put_key() is potentially copying uninitialized kernel stack memory into socket buffers, since the compiler may leave a 3-byte hole at the end of `struct ovs_key_ct_tuple_ipv4` and `struct ovs_key_ct_tuple_ipv6`. Fix it by initializing `orig` with memset(). Fixes: 9dd7f89 ("openvswitch: Add original direction conntrack tuple to sw_flow_key.") Suggested-by: Dan Carpenter <[email protected]> Signed-off-by: Peilin Ye <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit a0dced1 ] This reverts commit 71130f2. In commit 71130f2 ("vxlan: fix tos value before xmit") we want to make sure the tos value are filtered by RT_TOS() based on RFC1349. 0 1 2 3 4 5 6 7 +-----+-----+-----+-----+-----+-----+-----+-----+ | PRECEDENCE | TOS | MBZ | +-----+-----+-----+-----+-----+-----+-----+-----+ But RFC1349 has been obsoleted by RFC2474. The new DSCP field defined like 0 1 2 3 4 5 6 7 +-----+-----+-----+-----+-----+-----+-----+-----+ | DS FIELD, DSCP | ECN FIELD | +-----+-----+-----+-----+-----+-----+-----+-----+ So with IPTOS_TOS_MASK 0x1E RT_TOS(tos) ((tos)&IPTOS_TOS_MASK) the first 3 bits DSCP info will get lost. To take all the DSCP info in xmit, we should revert the patch and just push all tos bits to ip_tunnel_ecn_encap(), which will handling ECN field later. Fixes: 71130f2 ("vxlan: fix tos value before xmit") Signed-off-by: Hangbin Liu <[email protected]> Acked-by: Guillaume Nault <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 16f6458 ] The msg_zerocopy test pins the sender and receiver threads to separate cores to reduce variance between runs. But it hardcodes the cores and skips core 0, so it fails on machines with the selected cores offline, or simply fewer cores. The test mainly gives code coverage in automated runs. The throughput of zerocopy ('-z') and non-zerocopy runs is logged for manual inspection. Continue even when sched_setaffinity fails. Just log to warn anyone interpreting the data. Fixes: 07b65c5 ("test: add msg_zerocopy test") Reported-by: Colin Ian King <[email protected]> Signed-off-by: Willem de Bruijn <[email protected]> Acked-by: Colin Ian King <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 730e700 ] For retransmitted packets, TCP needs to resort to using TCP timestamps for computing RTT samples. In the common case where the data and ACK fall in the same 1-millisecond interval, TCP senders with millisecond- granularity TCP timestamps compute a ca_rtt_us of 0. This ca_rtt_us of 0 propagates to rs->rtt_us. This value of 0 can cause performance problems for congestion control modules. For example, in BBR, the zero min_rtt sample can bring the min_rtt and BDP estimate down to 0, reduce snd_cwnd and result in a low throughput. It would be hard to mitigate this with filtering in the congestion control module, because the proper floor to apply would depend on the method of RTT sampling (using timestamp options or internally-saved transmission timestamps). This fix applies a floor of 1 for the RTT sample delta from TCP timestamps, so that seq_rtt_us, ca_rtt_us, and rs->rtt_us will be at least 1 * (USEC_PER_SEC / TCP_TS_HZ). Note that the receiver RTT computation in tcp_rcv_rtt_measure() and min_rtt computation in tcp_update_rtt_min() both already apply a floor of 1 timestamp tick, so this commit makes the code more consistent in avoiding this edge case of a value of 0. Signed-off-by: Jianfeng Wang <[email protected]> Signed-off-by: Neal Cardwell <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Acked-by: Kevin Yang <[email protected]> Acked-by: Yuchung Cheng <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 311aa6a upstream. The IMA_APPRAISE_BOOTPARAM config allows enabling different "ima_appraise=" modes - log, fix, enforce - at run time, but not when IMA architecture specific policies are enabled. This prevents properly labeling the filesystem on systems where secure boot is supported, but not enabled on the platform. Only when secure boot is actually enabled should these IMA appraise modes be disabled. This patch removes the compile time dependency and makes it a runtime decision, based on the secure boot state of that platform. Test results as follows: -> x86-64 with secure boot enabled [ 0.015637] Kernel command line: <...> ima_policy=appraise_tcb ima_appraise=fix [ 0.015668] ima: Secure boot enabled: ignoring ima_appraise=fix boot parameter option -> powerpc with secure boot disabled [ 0.000000] Kernel command line: <...> ima_policy=appraise_tcb ima_appraise=fix [ 0.000000] Secure boot mode disabled -> Running the system without secure boot and with both options set: CONFIG_IMA_APPRAISE_BOOTPARAM=y CONFIG_IMA_ARCH_POLICY=y Audit prompts "missing-hash" but still allow execution and, consequently, filesystem labeling: type=INTEGRITY_DATA msg=audit(07/09/2020 12:30:27.778:1691) : pid=4976 uid=root auid=root ses=2 subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 op=appraise_data cause=missing-hash comm=bash name=/usr/bin/evmctl dev="dm-0" ino=493150 res=no Cc: [email protected] Fixes: d958083 ("x86/ima: define arch_get_ima_policy() for x86") Signed-off-by: Bruno Meneguele <[email protected]> Cc: [email protected] # 5.0 Signed-off-by: Mimi Zohar <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 4120553 upstream. svcrdma expects that the payload falls precisely into the xdr_buf page vector. This does not seem to be the case for nfsd4_encode_readv(). This code is called only when fops->splice_read is missing or when RQ_SPLICE_OK is clear, so it's not a noticeable problem in many common cases. Add new transport method: ->xpo_read_payload so that when a READ payload does not fit exactly in rq_res's page vector, the XDR encoder can inform the RPC transport exactly where that payload is, without the payload's XDR pad. That way, when a Write chunk is present, the transport knows what byte range in the Reply message is supposed to be matched with the chunk. Note that the Linux NFS server implementation of NFS/RDMA can currently handle only one Write chunk per RPC-over-RDMA message. This simplifies the implementation of this fix. Fixes: b042098 ("nfsd4: allow exotic read compounds") Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=198053 Signed-off-by: Chuck Lever <[email protected]> Cc: Timo Rothenpieler <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Tested-by: Shuah Khan <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Commit 567092c (Merge tag 'v5.4.52' into 5.4-1.0.0-imx) ended up bringing the pm-imx6.c content from upstream, as a consequence of applying 1053339 (ARM: imx6: add missing put_device() call in imx6q_suspend_init()), making the current version incompatible with the rest of the BSP-based tree. This was noticed when building the kernel for a iMX6-based device that used pm-imx6, as the build failed due missing imx6_pm_map_io. Signed-off-by: Ricardo Salveti <[email protected]> (cherry picked from commit 2483a91)
This is the 5.4.58 stable release Signed-off-by: Andrey Zhizhikin <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Update to 5.4.58:
Automatic merge performed, no conflicts recorded.
Cherry-pick commit [2483a91] which solves build issues introduced during merge of 5.4.52 stable tag
Build and boot tested on imx8mmevk, result - Pass.
-- andrey