LPC546XX: Add ENET support

features/FEATURE_LWIP/lwip-interface/lwip-eth/arch/TARGET_NXP/TARGET_LPC546XX/lpc546xx_emac_config.h

@@ -0,0 +1,37 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2017 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef LPC546XX_EMAC_CONFIG_H__
+#define LPC546XX_EMAC_CONFIG_H__
+
+#include "fsl_enet.h"
+
+#define ENET_RX_RING_LEN              (16)
+#define ENET_TX_RING_LEN              (8)
+
+#define ENET_ETH_MAX_FLEN             (ENET_FRAME_MAX_FRAMELEN)
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+int phy_link_status(void);
+
+#if defined(__cplusplus)
+}
+#endif
+
+#endif // #define LPC546XX_EMAC_CONFIG_H__
+

features/FEATURE_LWIP/lwip-interface/lwip-eth/arch/TARGET_NXP/TARGET_LPC546XX/lwipopts_conf.h

@@ -0,0 +1,29 @@
+/* Copyright (C) 2012 mbed.org, MIT License
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+ * and associated documentation files (the "Software"), to deal in the Software without restriction,
+ * including without limitation the rights to use, copy, modify, merge, publish, distribute,
+ * sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all copies or
+ * substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+ * BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef LWIPOPTS_CONF_H
+#define LWIPOPTS_CONF_H
+
+#include "lpc546xx_emac_config.h"
+
+#define LWIP_TRANSPORT_ETHERNET       1
+#define ETH_PAD_SIZE                  0
+
+#define MEM_SIZE                      (ENET_RX_RING_LEN * (ENET_ETH_MAX_FLEN + ENET_BUFF_ALIGNMENT) + ENET_TX_RING_LEN * ENET_ETH_MAX_FLEN)
+
+#endif

targets/TARGET_NXP/TARGET_MCUXpresso_MCUS/TARGET_LPC546XX/TARGET_LPCXpresso/crc.c

@@ -0,0 +1,234 @@
+/**********************************************************************
+ *
+ * Filename:    crc.c
+ * 
+ * Description: Slow and fast implementations of the CRC standards.
+ *
+ * Notes:       The parameters for each supported CRC standard are
+ *				defined in the header file crc.h.  The implementations
+ *				here should stand up to further additions to that list.
+ *
+ * 
+ * Copyright (c) 2000 by Michael Barr.  This software is placed into
+ * the public domain and may be used for any purpose.  However, this
+ * notice must not be changed or removed and no warranty is either
+ * expressed or implied by its publication or distribution.
+ **********************************************************************/
+
+#include "crc.h"
+
+
+/*
+ * Derive parameters from the standard-specific parameters in crc.h.
+ */
+#define WIDTH    (8 * sizeof(crc))
+#define TOPBIT   (1 << (WIDTH - 1))
+
+#if (REFLECT_DATA == TRUE)
+#undef  REFLECT_DATA
+#define REFLECT_DATA(X)			((unsigned char) reflect((X), 8))
+#else
+#undef  REFLECT_DATA
+#define REFLECT_DATA(X)			(X)
+#endif
+
+#if (REFLECT_REMAINDER == TRUE)
+#undef  REFLECT_REMAINDER
+#define REFLECT_REMAINDER(X)	((crc) reflect((X), WIDTH))
+#else
+#undef  REFLECT_REMAINDER
+#define REFLECT_REMAINDER(X)	(X)
+#endif
+
+
+/*********************************************************************
+ *
+ * Function:    reflect()
+ * 
+ * Description: Reorder the bits of a binary sequence, by reflecting
+ *				them about the middle position.
+ *
+ * Notes:		No checking is done that nBits <= 32.
+ *
+ * Returns:		The reflection of the original data.
+ *
+ *********************************************************************/
+static unsigned long
+reflect(unsigned long data, unsigned char nBits)
+{
+	unsigned long  reflection = 0x00000000;
+	unsigned char  bit;
+
+	/*
+	 * Reflect the data about the center bit.
+	 */
+	for (bit = 0; bit < nBits; ++bit)
+	{
+		/*
+		 * If the LSB bit is set, set the reflection of it.
+		 */
+		if (data & 0x01)
+		{
+			reflection |= (1 << ((nBits - 1) - bit));
+		}
+
+		data = (data >> 1);
+	}
+
+	return (reflection);
+
+}	/* reflect() */
+
+
+/*********************************************************************
+ *
+ * Function:    crcSlow()
+ * 
+ * Description: Compute the CRC of a given message.
+ *
+ * Notes:		
+ *
+ * Returns:		The CRC of the message.
+ *
+ *********************************************************************/
+crc
+crcSlow(unsigned char const message[], int nBytes)
+{
+    crc            remainder = INITIAL_REMAINDER;
+	int            byte;
+	unsigned char  bit;
+
+
+    /*
+     * Perform modulo-2 division, a byte at a time.
+     */
+    for (byte = 0; byte < nBytes; ++byte)
+    {
+        /*
+         * Bring the next byte into the remainder.
+         */
+        remainder ^= (REFLECT_DATA(message[byte]) << (WIDTH - 8));
+
+        /*
+         * Perform modulo-2 division, a bit at a time.
+         */
+        for (bit = 8; bit > 0; --bit)
+        {
+            /*
+             * Try to divide the current data bit.
+             */
+            if (remainder & TOPBIT)
+            {
+                remainder = (remainder << 1) ^ POLYNOMIAL;
+            }
+            else
+            {
+                remainder = (remainder << 1);
+            }
+        }
+    }
+
+    /*
+     * The final remainder is the CRC result.
+     */
+    return (REFLECT_REMAINDER(remainder) ^ FINAL_XOR_VALUE);
+
+}   /* crcSlow() */
+
+
+crc  crcTable[256];
+
+
+/*********************************************************************
+ *
+ * Function:    crcInit()
+ * 
+ * Description: Populate the partial CRC lookup table.
+ *
+ * Notes:		This function must be rerun any time the CRC standard
+ *				is changed.  If desired, it can be run "offline" and
+ *				the table results stored in an embedded system's ROM.
+ *
+ * Returns:		None defined.
+ *
+ *********************************************************************/
+void
+crcInit(void)
+{
+    crc			   remainder;
+	int			   dividend;
+	unsigned char  bit;
+
+
+    /*
+     * Compute the remainder of each possible dividend.
+     */
+    for (dividend = 0; dividend < 256; ++dividend)
+    {
+        /*
+         * Start with the dividend followed by zeros.
+         */
+        remainder = dividend << (WIDTH - 8);
+
+        /*
+         * Perform modulo-2 division, a bit at a time.
+         */
+        for (bit = 8; bit > 0; --bit)
+        {
+            /*
+             * Try to divide the current data bit.
+             */			
+            if (remainder & TOPBIT)
+            {
+                remainder = (remainder << 1) ^ POLYNOMIAL;
+            }
+            else
+            {
+                remainder = (remainder << 1);
+            }
+        }
+
+        /*
+         * Store the result into the table.
+         */
+        crcTable[dividend] = remainder;
+    }
+
+}   /* crcInit() */
+
+
+/*********************************************************************
+ *
+ * Function:    crcFast()
+ * 
+ * Description: Compute the CRC of a given message.
+ *
+ * Notes:		crcInit() must be called first.
+ *
+ * Returns:		The CRC of the message.
+ *
+ *********************************************************************/
+crc
+crcFast(unsigned char const message[], int nBytes)
+{
+    crc	           remainder = INITIAL_REMAINDER;
+    unsigned char  data;
+	int            byte;
+
+
+    /*
+     * Divide the message by the polynomial, a byte at a time.
+     */
+    for (byte = 0; byte < nBytes; ++byte)
+    {
+        data = REFLECT_DATA(message[byte]) ^ (remainder >> (WIDTH - 8));
+  		remainder = crcTable[data] ^ (remainder << 8);
+    }
+
+    /*
+     * The final remainder is the CRC.
+     */
+    return (REFLECT_REMAINDER(remainder) ^ FINAL_XOR_VALUE);
+
+}   /* crcFast() */
+

targets/TARGET_NXP/TARGET_MCUXpresso_MCUS/TARGET_LPC546XX/TARGET_LPCXpresso/crc.h

@@ -0,0 +1,77 @@
+/**********************************************************************
+ *
+ * Filename:    crc.h
+ * 
+ * Description: A header file describing the various CRC standards.
+ *
+ * Notes:       
+ *
+ * 
+ * Copyright (c) 2000 by Michael Barr.  This software is placed into
+ * the public domain and may be used for any purpose.  However, this
+ * notice must not be changed or removed and no warranty is either
+ * expressed or implied by its publication or distribution.
+ **********************************************************************/
+
+#ifndef _crc_h
+#define _crc_h
+
+
+#define FALSE	0
+#define TRUE	!FALSE
+
+/*
+ * Select the CRC standard from the list that follows.
+ */
+#define CRC16
+
+
+#if defined(CRC_CCITT)
+
+typedef unsigned short  crc;
+
+#define CRC_NAME			"CRC-CCITT"
+#define POLYNOMIAL			0x1021
+#define INITIAL_REMAINDER	0xFFFF
+#define FINAL_XOR_VALUE		0x0000
+#define REFLECT_DATA		FALSE
+#define REFLECT_REMAINDER	FALSE
+#define CHECK_VALUE			0x29B1
+
+#elif defined(CRC16)
+
+typedef unsigned short  crc;
+
+#define CRC_NAME			"CRC-16"
+#define POLYNOMIAL			0x8005
+#define INITIAL_REMAINDER	0x0000
+#define FINAL_XOR_VALUE		0x0000
+#define REFLECT_DATA		TRUE
+#define REFLECT_REMAINDER	TRUE
+#define CHECK_VALUE			0xBB3D
+
+#elif defined(CRC32)
+
+typedef unsigned long  crc;
+
+#define CRC_NAME			"CRC-32"
+#define POLYNOMIAL			0x04C11DB7
+#define INITIAL_REMAINDER	0xFFFFFFFF
+#define FINAL_XOR_VALUE		0xFFFFFFFF
+#define REFLECT_DATA		TRUE
+#define REFLECT_REMAINDER	TRUE
+#define CHECK_VALUE			0xCBF43926
+
+#else
+
+#error "One of CRC_CCITT, CRC16, or CRC32 must be #define'd."
+
+#endif
+
+
+void  crcInit(void);
+crc   crcSlow(unsigned char const message[], int nBytes);
+crc   crcFast(unsigned char const message[], int nBytes);
+
+
+#endif /* _crc_h */