ttt #7
Draft
ttt #7
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Commit 2fae6bb ("xen/privcmd: Add new syscall to get gsi from dev") adds a weak reverse dependency to the config XEN_PRIVCMD definition, that dependency causes xen-privcmd can't be loaded on domU, because dependent xen-pciback isn't always be loaded successfully on domU. To solve above problem, remove that dependency, and do not call pcistub_get_gsi_from_sbdf() directly, instead add a hook in drivers/xen/apci.c, xen-pciback register the real call function, then in privcmd_ioctl_pcidev_get_gsi call that hook. Fixes: 2fae6bb ("xen/privcmd: Add new syscall to get gsi from dev") Reported-by: Marek Marczykowski-Górecki <[email protected]> Signed-off-by: Jiqian Chen <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Message-ID: <[email protected]> Signed-off-by: Juergen Gross <[email protected]>
…linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial device ids for 6.12-rc4 Here are some new modem device ids. Everything has been in linux-next over night with no reported issues. * tag 'usb-serial-6.12-rc4' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add Telit FN920C04 MBIM compositions USB: serial: option: add support for Quectel EG916Q-GL
Patch for Goodix 27c6:0d42 touchpads found in Inspiron 5515 laptops. After resume from suspend, one can communicate with this device just fine. We can read data from it or request a reset, but for some reason the interrupt line will not go up when new events are available. (it can correctly respond to a reset with an interrupt tho) The only way I found to wake this device up is to send anything to it after ~1.5s mark, for example a simple read request, or power mode change. In this patch, I simply delay the resume steps with msleep, this will cause the set_power request to happen after the ~1.5s barrier causing the device to resume its event interrupts. Sleep was used rather than delayed_work to make this workaround as non-invasive as possible. [[email protected]: shortlog update] Signed-off-by: Bartłomiej Maryńczak <[email protected]> Signed-off-by: Jiri Kosina <[email protected]>
The Logitech Casa Touchpad does not reliably send touch release signals when communicating through the Logitech Bolt wireless-to-USB receiver. Adjusting the device class to add MT_QUIRK_NOT_SEEN_MEANS_UP to make sure that no touches become stuck, MT_QUIRK_FORCE_MULTI_INPUT is not needed, but harmless. Linux does not have information on which devices are connected to the Bolt receiver, so we have to enable this for the entire device. Signed-off-by: Kenneth Albanowski <[email protected]> Signed-off-by: Jiri Kosina <[email protected]>
The Thinkpad X1 Tablet Gen 3 keyboard has the same Lenovo specific quirks as the original Thinkpad X1 Tablet keyboard. Add the PID for the "Thinkpad X1 Tablet Gen 3 keyboard" to the hid-lenovo driver to fix the FnLock, Mute and media buttons not working. Suggested-by: Izhar Firdaus <[email protected]> Closes https://bugzilla.redhat.com/show_bug.cgi?id=2315395 Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Jiri Kosina <[email protected]>
Building the kernel with W=1 generates the following warning:
fs/proc/fd.c:81: warning: This comment starts with '/**',
but isn't a kernel-doc comment.
Use a normal comment for the helper function proc_fdinfo_permission().
Signed-off-by: Thorsten Blum <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Christian Brauner <[email protected]>
Remove some entries due to various compliance requirements. They can come back in the future if sufficient documentation is provided. Link: https://lore.kernel.org/r/2024101835-tiptop-blip-09ed@gregkh Signed-off-by: Greg Kroah-Hartman <[email protected]>
rts5228, rts5261, rts5264 are supported by the rtsx_pci driver, but they are not mentioned in the Kconfig help when the code was added. List those models in the Kconfig help accordingly. Signed-off-by: Yo-Jung Lin (Leo) <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
…git/s390/linux Pull s390 fixes from Heiko Carstens: - Fix PCI error recovery by handling error events correctly - Fix CCA crypto card behavior within protected execution environment - Two KVM commits which fix virtual vs physical address handling bugs in KVM pfault handling - Fix return code handling in pckmo_key2protkey() - Deactivate sclp console as late as possible so that outstanding messages appear on the console instead of being dropped on reboot - Convert newlines to CRLF instead of LFCR for the sclp vt220 driver, as required by the vt220 specification - Initialize also psw mask in perf_arch_fetch_caller_regs() to make sure that user_mode(regs) will return false - Update defconfigs * tag 's390-6.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: Update defconfigs s390: Initialize psw mask in perf_arch_fetch_caller_regs() s390/sclp_vt220: Convert newlines to CRLF instead of LFCR s390/sclp: Deactivate sclp after all its users s390/pkey_pckmo: Return with success for valid protected key types KVM: s390: Change virtual to physical address access in diag 0x258 handler KVM: s390: gaccess: Check if guest address is in memslot s390/ap: Fix CCA crypto card behavior within protected execution environment s390/pci: Handle PCI error codes other than 0x3a
…el/git/powerpc/linux Pull powerpc fix from Madhavan Srinivasan: - To prevent possible memory leak, free "name" on error in opal_event_init() Thanks to Michael Ellerman and 2639161967. * tag 'powerpc-6.12-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/powernv: Free name on error in opal_event_init()
…ux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
"ARM-SMMU fixes from Will Deacon:
- Clarify warning message when failing to disable the MMU-500
prefetcher
- Fix undefined behaviour in calculation of L1 stream-table index
when 32-bit StreamIDs are implemented
- Replace a rogue comma with a semicolon
Intel VT-d fix from Lu Baolu:
- Fix incorrect pci_for_each_dma_alias() for non-PCI devices"
* tag 'iommu-fixes-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/vt-d: Fix incorrect pci_for_each_dma_alias() for non-PCI devices
iommu/arm-smmu-v3: Convert comma to semicolon
iommu/arm-smmu-v3: Fix last_sid_idx calculation for sid_bits==32
iommu/arm-smmu: Clarify MMU-500 CPRE workaround
Merge amd-pstate driver fixes for 6.12-rc4: - Enable ACPI CPPC in amd_pstate_register_driver() after disabling it in amd_pstate_unregister_driver() during driver operation mode switch (Dhananjay Ugwekar). - Make amd-pstate use nominal performance as the maximum performance level when boost is disabled (Mario Limonciello). * pm-cpufreq: cpufreq/amd-pstate: Use nominal perf for limits when boost is disabled cpufreq/amd-pstate: Fix amd_pstate mode switch on shared memory systems
The lockdep asserts for the new follow_pfnmap() API "knows" that a pfnmap always has a vma->vm_file, since that's the only way to create such a mapping. And that's actually true for all the normal cases. But not for the mmap failure case, where the incomplete mapping is torn down and we have cleared vma->vm_file because the failure occured before the file was linked to the vma. So this codepath does actually need to check for vm_file being NULL. Reported-by: Jann Horn <[email protected]> Fixes: 6da8e96 ("mm: new follow_pfnmap API") Cc: Peter Xu <[email protected]> Cc: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
…kernel/git/song/md into block-6.12 Pull MD fixes from Song. * tag 'md-6.12-20241018' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md: md/raid10: fix null ptr dereference in raid10_size() md: ensure child flush IO does not affect origin bio->bi_status
…7 regs Turns out some registers of pre-2.5 version of rxmacro codecs are not located at the expected offsets but 0xc further away in memory. So far the detected registers are CDC_RX_RX2_RX_PATH_SEC7 and CDC_RX_RX2_RX_PATH_DSM_CTL. CDC_RX_RXn_RX_PATH_DSM_CTL(rx, n) macro incorrectly generates the address 0x540 for RX2 but it should be 0x54C and it also overwrites CDC_RX_RX2_RX_PATH_SEC7 which is located at 0x540. The same goes for CDC_RX_RXn_RX_PATH_SEC7(rx, n). Fix this by introducing additional rxn_reg_stride2 offset. For 2.5 version and above this offset will be equal to 0. With such change the corresponding RXn() macros will generate the same values for 2.5 codec version for all RX paths and the same old values for pre-2.5 version for RX0 and RX1. However for the latter case with RX2 path it will also add rxn_reg_stride2 on top. While at this, also remove specific if-check for INTERP_AUX from rx_macro_digital_mute() and rx_macro_enable_interp_clk(). These if-check was used to handle such special offset for AUX interpolator but since CDC_RX_RXn_RX_PATH_SEC7(rx, n) and CDC_RX_RXn_RX_PATH_DSM_CTL(rx, n) macros will generate the correst addresses of dsm register, they are no longer needed. Cc: Srinivas Kandagatla <[email protected]> Cc: Krzysztof Kozlowski <[email protected]> Signed-off-by: Alexey Klimov <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
…trol types On i.MX8MM the register of volume control has positive and negative values. It is different from other platforms like i.MX8MP and i.MX93 which only have positive values. Add a volume_sx flag to use SX_TLV volume control for this kind of platform. Use common TLV volume control for other platforms. Fixes: cdfa92e ("ASoC: fsl_micfil: Correct the number of steps on SX controls") Signed-off-by: Chancel Liu <[email protected]> Reviewed-by: Daniel Baluta <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
…m/kernel Pull drm fixes from Dave Airlie: "Weekly fixes, msm and xe are the two main ones, with a bunch of scattered fixes including a largish revert in mgag200, then amdgpu, vmwgfx and scattering of other minor ones. All seems pretty regular. msm: - Display: - move CRTC resource assignment to atomic_check otherwise to make consecutive calls to atomic_check() consistent - fix rounding / sign-extension issues with pclk calculation in case of DSC - cleanups to drop incorrect null checks in dpu snapshots - fix to use kvzalloc in dpu snapshot to avoid allocation issues in heavily loaded system cases - Fix to not program merge_3d block if dual LM is not being used - Fix to not flush merge_3d block if its not enabled otherwise this leads to false timeouts - GPU: - a7xx: add a fence wait before SMMU table update xe: - New workaround to Xe2 (Aradhya) - Fix unbalanced rpm put (Matthew Auld) - Remove fragile lock optimization (Matthew Brost) - Fix job release, delegating it to the drm scheduler (Matthew Brost) - Fix timestamp bit width for Xe2 (Lucas) - Fix external BO's dma-resv usag (Matthew Brost) - Fix returning success for timeout in wait_token (Nirmoy) - Initialize fence to avoid it being detected as signaled (Matthew Auld) - Improve cache flush for BMG (Matthew Auld) - Don't allow hflip for tile4 framebuffer on Xe2 (Juha-Pekka) amdgpu: - SR-IOV fix - CS chunk handling fix - MES fixes - SMU13 fixes amdkfd: - VRAM usage reporting fix radeon: - Fix possible_clones handling i915: - Two DP bandwidth related MST fixes ast: - Clear EDID on unplugged connectors host1x: - Fix boot on Tegra186 - Set DMA parameters mgag200: - Revert VBLANK support panel: - himax-hx83192: Adjust power and gamma qaic: - Sgtable loop fixes vmwgfx: - Limit display layout allocatino size - Handle allocation errors in connector checks - Clean up KMS code for 2d-only setup - Report surface-check errors correctly - Remove NULL test around kvfree()" * tag 'drm-fixes-2024-10-18' of https://gitlab.freedesktop.org/drm/kernel: (45 commits) drm/ast: vga: Clear EDID if no display is connected drm/ast: sil164: Clear EDID if no display is connected Revert "drm/mgag200: Add vblank support" drm/amdgpu/swsmu: default to fullscreen 3D profile for dGPUs drm/i915/display: Don't allow tile4 framebuffer to do hflip on display20 or greater drm/xe/bmg: improve cache flushing behaviour drm/xe/xe_sync: initialise ufence.signalled drm/xe/ufence: ufence can be signaled right after wait_woken drm/xe: Use bookkeep slots for external BO's in exec IOCTL drm/xe/query: Increase timestamp width drm/xe: Don't free job in TDR drm/xe: Take job list lock in xe_sched_add_pending_job drm/xe: fix unbalanced rpm put() with declare_wedged() drm/xe: fix unbalanced rpm put() with fence_fini() drm/xe/xe2lpg: Extend Wa_15016589081 for xe2lpg drm/i915/dp_mst: Don't require DSC hblank quirk for a non-DSC compatible mode drm/i915/dp_mst: Handle error during DSC BW overhead/slice calculation drm/msm/a6xx+: Insert a fence wait before SMMU table update drm/msm/dpu: don't always program merge_3d block drm/msm/dpu: Don't always set merge_3d pending flush ...
…/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "Fix auto-detect regression in jc42 driver" * tag 'hwmon-for-v6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: [PATCH} hwmon: (jc42) Properly detect TSE2004-compliant devices again
…git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two issues in the amd-pstate cpufreq driver and update the
intel_rapl power capping driver with a new processor ID.
Specifics:
- Enable ACPI CPPC in amd_pstate_register_driver() after disabling it
in amd_pstate_unregister_driver() when switching driver operation
modes (Dhananjay Ugwekar)
- Make amd-pstate use nominal performance as the maximum performance
level when boost is disabled (Mario Limonciello)
- Add ArrowLake-H to the list of processors where PL4 is supported in
the MSR part of the intel_rapl power capping driver (Srinivas
Pandruvada)"
* tag 'pm-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
powercap: intel_rapl_msr: Add PL4 support for ArrowLake-H
cpufreq/amd-pstate: Use nominal perf for limits when boost is disabled
cpufreq/amd-pstate: Fix amd_pstate mode switch on shared memory systems
…fs-linux Pull xfs fixes from Carlos Maiolino: - Fix integer overflow in xrep_bmap - Fix stale dealloc punching for COW IO * tag 'xfs-6.12-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: punch delalloc extents from the COW fork for COW writes xfs: set IOMAP_F_SHARED for all COW fork allocations xfs: share more code in xfs_buffered_write_iomap_begin xfs: support the COW fork in xfs_bmap_punch_delalloc_range xfs: IOMAP_ZERO and IOMAP_UNSHARE already hold invalidate_lock xfs: take XFS_MMAPLOCK_EXCL xfs_file_write_zero_eof xfs: factor out a xfs_file_write_zero_eof helper iomap: move locking out of iomap_write_delalloc_release iomap: remove iomap_file_buffered_write_punch_delalloc iomap: factor out a iomap_last_written_block helper xfs: fix integer overflow in xrep_bmap
…h/cifs-2.6 Pull smb client fixes from Steve French: - Fix possible double free setting xattrs - Fix slab out of bounds with large ioctl payload - Remove three unused functions, and an unused variable that could be confusing * tag 'v6.12-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: Remove unused functions smb/client: Fix logically dead code smb: client: fix OOBs when building SMB2_IOCTL request smb: client: fix possible double free in smb2_set_ea()
…ejected If enabled, we fallback to the platform keyring if the trusted keyring doesn't have the key used to sign the ipe policy. But if pkcs7_verify() rejects the key for other reasons, such as usage restrictions, we do not fallback. Do so, following the same change in dm-verity. Signed-off-by: Luca Boccassi <[email protected]> Suggested-by: Serge Hallyn <[email protected]> [FW: fixed some line length issues and a typo in the commit message] Signed-off-by: Fan Wu <[email protected]>
Update Integrity Policy Enforcement (IPE) LSM tree url and maintainer's email to the newly issued kernel.org tree/email. Signed-off-by: Fan Wu <[email protected]>
There is a race between laundromat handling of revoked delegations and a client sending free_stateid operation. Laundromat thread finds that delegation has expired and needs to be revoked so it marks the delegation stid revoked and it puts it on a reaper list but then it unlock the state lock and the actual delegation revocation happens without the lock. Once the stid is marked revoked a racing free_stateid processing thread does the following (1) it calls list_del_init() which removes it from the reaper list and (2) frees the delegation stid structure. The laundromat thread ends up not calling the revoke_delegation() function for this particular delegation but that means it will no release the lock lease that exists on the file. Now, a new open for this file comes in and ends up finding that lease list isn't empty and calls nfsd_breaker_owns_lease() which ends up trying to derefence a freed delegation stateid. Leading to the followint use-after-free KASAN warning: kernel: ================================================================== kernel: BUG: KASAN: slab-use-after-free in nfsd_breaker_owns_lease+0x140/0x160 [nfsd] kernel: Read of size 8 at addr ffff0000e73cd0c8 by task nfsd/6205 kernel: kernel: CPU: 2 UID: 0 PID: 6205 Comm: nfsd Kdump: loaded Not tainted 6.11.0-rc7+ torvalds#9 kernel: Hardware name: Apple Inc. Apple Virtualization Generic Platform, BIOS 2069.0.0.0.0 08/03/2024 kernel: Call trace: kernel: dump_backtrace+0x98/0x120 kernel: show_stack+0x1c/0x30 kernel: dump_stack_lvl+0x80/0xe8 kernel: print_address_description.constprop.0+0x84/0x390 kernel: print_report+0xa4/0x268 kernel: kasan_report+0xb4/0xf8 kernel: __asan_report_load8_noabort+0x1c/0x28 kernel: nfsd_breaker_owns_lease+0x140/0x160 [nfsd] kernel: nfsd_file_do_acquire+0xb3c/0x11d0 [nfsd] kernel: nfsd_file_acquire_opened+0x84/0x110 [nfsd] kernel: nfs4_get_vfs_file+0x634/0x958 [nfsd] kernel: nfsd4_process_open2+0xa40/0x1a40 [nfsd] kernel: nfsd4_open+0xa08/0xe80 [nfsd] kernel: nfsd4_proc_compound+0xb8c/0x2130 [nfsd] kernel: nfsd_dispatch+0x22c/0x718 [nfsd] kernel: svc_process_common+0x8e8/0x1960 [sunrpc] kernel: svc_process+0x3d4/0x7e0 [sunrpc] kernel: svc_handle_xprt+0x828/0xe10 [sunrpc] kernel: svc_recv+0x2cc/0x6a8 [sunrpc] kernel: nfsd+0x270/0x400 [nfsd] kernel: kthread+0x288/0x310 kernel: ret_from_fork+0x10/0x20 This patch proposes a fixed that's based on adding 2 new additional stid's sc_status values that help coordinate between the laundromat and other operations (nfsd4_free_stateid() and nfsd4_delegreturn()). First to make sure, that once the stid is marked revoked, it is not removed by the nfsd4_free_stateid(), the laundromat take a reference on the stateid. Then, coordinating whether the stid has been put on the cl_revoked list or we are processing FREE_STATEID and need to make sure to remove it from the list, each check that state and act accordingly. If laundromat has added to the cl_revoke list before the arrival of FREE_STATEID, then nfsd4_free_stateid() knows to remove it from the list. If nfsd4_free_stateid() finds that operations arrived before laundromat has placed it on cl_revoke list, it marks the state freed and then laundromat will no longer add it to the list. Also, for nfsd4_delegreturn() when looking for the specified stid, we need to access stid that are marked removed or freeable, it means the laundromat has started processing it but hasn't finished and this delegreturn needs to return nfserr_deleg_revoked and not nfserr_bad_stateid. The latter will not trigger a FREE_STATEID and the lack of it will leave this stid on the cl_revoked list indefinitely. Fixes: 2d4a532 ("nfsd: ensure that clp->cl_revoked list is protected by clp->cl_lock") CC: [email protected] Signed-off-by: Olga Kornievskaia <[email protected]> Signed-off-by: Chuck Lever <[email protected]>
Merge series from Bard Liao <[email protected]>: Clean up the link DMA for playback during stop for IPC4 is required to reset the DMA read/write pointers when the stream is prepared and restarted after a call to snd_pcm_drain()/snd_pcm_drop(). The change is mainly on ASoC. We may go via ASoC tree with Vinod's Acked-by tag Ranjani Sridharan (4): ASoC: SOF: ipc4-topology: Do not set ALH node_id for aggregated DAIs ASoC: SOF: Intel: hda: Handle prepare without close for non-HDA DAI's soundwire: intel_ace2x: Send PDI stream number during prepare ASoC: SOF: Intel: hda: Always clean up link DMA during stop drivers/soundwire/intel_ace2x.c | 19 +++++----------- sound/soc/sof/intel/hda-dai-ops.c | 23 +++++++++---------- sound/soc/sof/intel/hda-dai.c | 37 +++++++++++++++++++++++++++---- sound/soc/sof/ipc4-topology.c | 15 +++++++++++-- 4 files changed, 62 insertions(+), 32 deletions(-) -- 2.43.0
Add MSI Claw A1M controller to xpad_device match table when in xinput mode. Add MSI VID as XPAD_XBOX360_VENDOR. Signed-off-by: John Edwards <[email protected]> Reviewed-by: Derek J. Clark <[email protected]> Reviewed-by: Christopher Snowhill <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: [email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
Pull io_uring fixes from Jens Axboe: - Fix a regression this merge window where cloning of registered buffers didn't take into account the dummy_ubuf - Fix a race with reading how many SQRING entries are available, causing userspace to need to loop around io_uring_sqring_wait() rather than being able to rely on SQEs being available when it returned - Ensure that the SQPOLL thread is TASK_RUNNING before running task_work off the cancelation exit path * tag 'io_uring-6.12-20241018' of git://git.kernel.dk/linux: io_uring/sqpoll: ensure task state is TASK_RUNNING when running task_work io_uring/rsrc: ignore dummy_ubuf for buffer cloning io_uring/sqpoll: close race on waiting for sqring entries
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Fix target passthrough identifier (Nilay)
- Fix tcp locking (Hannes)
- Replace list with sbitmap for tracking RDMA rsp tags (Guixen)
- Remove unnecessary fallthrough statements (Tokunori)
- Remove ready-without-media support (Greg)
- Fix multipath partition scan deadlock (Keith)
- Fix concurrent PCI reset and remove queue mapping (Maurizio)
- Fabrics shutdown fixes (Nilay)
- Fix for a kerneldoc warning (Keith)
- Fix a race with blk-rq-qos and wakeups (Omar)
- Cleanup of checking for always-set tag_set (SurajSonawane2415)
- Fix for a crash with CPU hotplug notifiers (Ming)
- Don't allow zero-copy ublk on unprivileged device (Ming)
- Use array_index_nospec() for CDROM (Josh)
- Remove dead code in drbd (David)
- Tweaks to elevator loading (Breno)
* tag 'block-6.12-20241018' of git://git.kernel.dk/linux:
cdrom: Avoid barrier_nospec() in cdrom_ioctl_media_changed()
nvme: use helper nvme_ctrl_state in nvme_keep_alive_finish function
nvme: make keep-alive synchronous operation
nvme-loop: flush off pending I/O while shutting down loop controller
nvme-pci: fix race condition between reset and nvme_dev_disable()
ublk: don't allow user copy for unprivileged device
blk-rq-qos: fix crash on rq_qos_wait vs. rq_qos_wake_function race
nvme-multipath: defer partition scanning
blk-mq: setup queue ->tag_set before initializing hctx
elevator: Remove argument from elevator_find_get
elevator: do not request_module if elevator exists
drbd: Remove unused conn_lowest_minor
nvme: disable CC.CRIME (NVME_CC_CRIME)
nvme: delete unnecessary fallthru comment
nvmet-rdma: use sbitmap to replace rsp free list
block: Fix elevator_get_default() checking for NULL q->tag_set
nvme: tcp: avoid race between queue_lock lock and destroy
nvmet-passthru: clear EUID/NGUID/UUID while using loop target
block: fix blk_rq_map_integrity_sg kernel-doc
When initially adding the touchkey support, a mistake was made in the property parsing code. The possible negative errno from device_property_count_u32() was never checked, which was an oversight left from converting to it from the of_property as part of the review fixes. Re-add the correct handling of the absent property, in which case zero touchkeys should be assumed, which would disable the feature. Reported-by: Jakob Hauser <[email protected]> Tested-by: Jakob Hauser <[email protected]> Fixes: 075d9b2 ("Input: zinitix - add touchkey support") Reviewed-by: Linus Walleij <[email protected]> Signed-off-by: Nikita Travkin <[email protected]> Tested-by: Yassine Oudjana <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
…b/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fix from Shuah Khan: - fix test makefile to install tests directory without which the test fails with errors * tag 'linux_kselftest-fixes-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftest: hid: add the missing tests directory
Use guard(mutex)() to acquire and automatically release ftrace_lock, fixing the issue of not unlocking when calling cpuhp_setup_state() fails. Fixes smatch warning: kernel/trace/fgraph.c:1317 register_ftrace_graph() warn: inconsistent returns '&ftrace_lock'. Link: https://lore.kernel.org/[email protected] Fixes: 2c02f73 ("fgraph: Use CPU hotplug mechanism to initialize idle shadow stacks") Reported-by: kernel test robot <[email protected]> Reported-by: Dan Carpenter <[email protected]> Closes: https://lore.kernel.org/r/[email protected]/ Suggested-by: Steven Rostedt <[email protected]> Signed-off-by: Li Huafei <[email protected]> Acked-by: Masami Hiramatsu (Google) <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>
The cpuhp state name given to cpuhp_setup_state() is "fgraph_idle_init" which doesn't really conform to the names that are used for cpu hotplug setups. Instead rename it to "fgraph:online" to be in line with other states. Cc: Mark Rutland <[email protected]> Cc: Mathieu Desnoyers <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/[email protected] Suggested-by: Masami Hiramatsu <[email protected]> Fixes: 2c02f73 ("fgraph: Use CPU hotplug mechanism to initialize idle shadow stacks") Signed-off-by: Steven Rostedt (Google) <[email protected]>
…rg/drm/xe/kernel into drm-fixes Driver Changes: - Increase invalidation timeout to avoid errors in some hosts (Shuicheng) - Flush worker on timeout (Badal) - Better handling for force wake failure (Shuicheng) - Improve argument check on user fence creation (Nirmoy) - Don't restart parallel queues multiple times on GT reset (Nirmoy) Signed-off-by: Dave Airlie <[email protected]> From: Lucas De Marchi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/trlkoiewtc4x2cyhsxmj3atayyq4zwto4iryea5pvya2ymc3yp@fdx5nhwmiyem
It wasn't there when the patch was posted for review, but somehow made it into the pull. Link: https://lore.kernel.org/all/[email protected]/ Fixes: efad715 ("fuse: allow O_PATH fd for FUSE_DEV_IOC_BACKING_OPEN") Signed-off-by: Miklos Szeredi <[email protected]>
Merge new DMI quirks for 6.12-rc5: - Add an ACPI IRQ override quirk for LG 16T90SP (Christian Heusel). - Add a lid switch detection quirk for Samsung Galaxy Book2 (Shubham Panwar). * acpi-resource: ACPI: resource: Add LG 16T90SP to irq1_level_low_skip_override[] * acpi-button: ACPI: button: Add DMI quirk for Samsung Galaxy Book2 to fix initial lid detection issue
Merge a dtpm_devfreq power capping driver fix for 6.12-rc5: - Fix a dev_pm_qos_add_request() return value check in __dtpm_devfreq_setup() to prevent it from failing if a positive number is returned (Yuan Can). * pm-powercap: powercap: dtpm_devfreq: Fix error check against dev_pm_qos_add_request()
It turns out that AMD has a "Meltdown Lite(tm)" issue with non-canonical accesses in kernel space. And so using just the high bit to decide whether an access is in user space or kernel space ends up with the good old "leak speculative data" if you have the right gadget using the result: CVE-2020-12965 “Transient Execution of Non-Canonical Accesses“ Now, the kernel surrounds the access with a STAC/CLAC pair, and those instructions end up serializing execution on older Zen architectures, which closes the speculation window. But that was true only up until Zen 5, which renames the AC bit [1]. That improves performance of STAC/CLAC a lot, but also means that the speculation window is now open. Note that this affects not just the new address masking, but also the regular valid_user_address() check used by access_ok(), and the asm version of the sign bit check in the get_user() helpers. It does not affect put_user() or clear_user() variants, since there's no speculative result to be used in a gadget for those operations. Reported-by: Andrew Cooper <[email protected]> Link: https://lore.kernel.org/all/[email protected]/ Link: https://lore.kernel.org/all/20241023094448.GAZxjFkEOOF_DM83TQ@fat_crate.local/ [1] Link: https://www.amd.com/en/resources/product-security/bulletin/amd-sb-1010.html Link: https://arxiv.org/pdf/2108.10771 Cc: Josh Poimboeuf <[email protected]> Cc: Borislav Petkov <[email protected]> Tested-by: Maciej Wieczor-Retman <[email protected]> # LAM case Fixes: 2865baf ("x86: support user address masking instead of non-speculative conditional") Fixes: 6014bc2 ("x86-64: make access_ok() independent of LAM") Fixes: b19b74b ("x86/mm: Rework address range check in get_user() and put_user()") Signed-off-by: Linus Torvalds <[email protected]>
The x86 user pointer validation changes made me look at compiler output a lot, and the wrong indentation for the ".popsection" in the generated assembler triggered me. Signed-off-by: Linus Torvalds <[email protected]>
…m/kernel Pull drm fixes from Dave Airlie: "Weekly drm fixes, mostly amdgpu and xe, with minor bridge and an i915 Kconfig fix. Nothing too scary and it seems to be pretty quiet. amdgpu: - ACPI method handling fixes - SMU 14.x fixes - Display idle optimization fix - DP link layer compliance fix - SDMA 7.x fix - PSR-SU fix - SWSMU fix i915: - Fix DRM_I915_GVT_KVMGT dependencies in Kconfig xe: - Increase invalidation timeout to avoid errors in some hosts - Flush worker on timeout - Better handling for force wake failure - Improve argument check on user fence creation - Don't restart parallel queues multiple times on GT reset bridge: - aux: Fix assignment of OF node - tc358767: Add missing of_node_put() in error path" * tag 'drm-fixes-2024-10-25' of https://gitlab.freedesktop.org/drm/kernel: drm/xe: Don't restart parallel queues multiple times on GT reset drm/xe/ufence: Prefetch ufence addr to catch bogus address drm/xe: Handle unreliable MMIO reads during forcewake drm/xe/guc/ct: Flush g2h worker in case of g2h response timeout drm/xe: Enlarge the invalidation timeout from 150 to 500 drm/amdgpu: handle default profile on on devices without fullscreen 3D drm/amd/display: Disable PSR-SU on Parade 08-01 TCON too drm/amdgpu: fix random data corruption for sdma 7 drm/amd/display: temp w/a for DP Link Layer compliance drm/amd/display: temp w/a for dGPU to enter idle optimizations drm/amd/pm: update deep sleep status on smu v14.0.2/3 drm/amd/pm: update overdrive function on smu v14.0.2/3 drm/amd/pm: update the driver-fw interface file for smu v14.0.2/3 drm/amd: Guard against bad data for ATIF ACPI method drm/bridge: tc358767: fix missing of_node_put() in for_each_endpoint_of_node() drm/bridge: Fix assignment of the of_node of the parent to aux bridge i915: fix DRM_I915_GVT_KVMGT dependencies
…el/git/tiwai/sound Pull sound fixes from Takashi Iwai: "The majority of changes here are about ASoC. There are two core changes in ASoC (the bump of minimal topology ABI version and the fix for references of components in DAPM code), and others are mostly various device-specific fixes for SoundWire, AMD, Intel, SOF, Qualcomm and FSL, in addition to a few usual HD-audio quirks and fixes" * tag 'sound-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (33 commits) ALSA: hda/realtek: Update default depop procedure ASoC: qcom: sc7280: Fix missing Soundwire runtime stream alloc ASoC: fsl_micfil: Add sample rate constraint ASoC: rt722-sdca: increase clk_stop_timeout to fix clock stop issue ALSA: hda/tas2781: select CRC32 instead of CRC32_SARWATE ALSA: hda/realtek: Add subwoofer quirk for Acer Predator G9-593 ALSA: firewire-lib: Avoid division by zero in apply_constraint_to_size() ASoC: fsl_micfil: Add a flag to distinguish with different volume control types ASoC: codecs: lpass-rx-macro: fix RXn(rx,n) macro for DSM_CTL and SEC7 regs ASoC: Change my e-mail to gmail ASoC: Intel: soc-acpi: lnl: Add match entry for TM2 laptops ASoC: amd: yc: Fix non-functional mic on ASUS E1404FA ASoC: SOF: Intel: hda: Always clean up link DMA during stop soundwire: intel_ace2x: Send PDI stream number during prepare ASoC: SOF: Intel: hda: Handle prepare without close for non-HDA DAI's ASoC: SOF: ipc4-topology: Do not set ALH node_id for aggregated DAIs MAINTAINERS: Update maintainer list for MICROCHIP ASOC, SSC and MCP16502 drivers ASoC: qcom: Select missing common Soundwire module code on SDM845 ASoC: fsl_esai: change dev_warn to dev_dbg in irq handler ASoC: rsnd: Fix probe failure on HiHope boards due to endpoint parsing ...
…/git/libata/linux Pull ata fix from Niklas Cassel: - Fix the handling of ATA commands that timeout (command that did not receive a completion interrupt within the configured timeout time). Commands that timeout, while also having either the FAILFAST flag set, or the command being a passthrough command, should never be retried. Restore this behavior (as it was before v6.12-rc1). * tag 'ata-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: ata: libata: Set DID_TIME_OUT for commands that actually timed out
…linux/kernel/git/brgl/linux Pull gpio fix from Bartosz Golaszewski: "Update MAINTAINERS with a keyword pattern for legacy GPIO API The goal is to alert us to anyone trying to use the deprecated, legacy API (this happens almost every release)" * tag 'gpio-fixes-for-v6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: MAINTAINERS: add a keyword entry for the GPIO subsystem
…kernel/git/deller/linux-fbdev Pull fbdev fixes from Helge Deller: - Fix some build warnings and failures with CONFIG_FB_IOMEM_FOPS and CONFIG_FB_DEVICE - Remove the da8xx fbdev driver - Constify struct sbus_mmap_map and fix indentation warning * tag 'fbdev-for-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: fbdev: wm8505fb: select CONFIG_FB_IOMEM_FOPS fbdev: da8xx: remove the driver fbdev: Constify struct sbus_mmap_map fbdev: nvidiafb: fix inconsistent indentation warning fbdev: sstfb: Make CONFIG_FB_DEVICE optional
…ernel/git/pci/pci Pull pci fixes from Bjorn Helgaas: - Hold the rescan lock while adding devices to avoid race with concurrent pwrctl rescan that can lead to a crash (Bartosz Golaszewski) - Avoid binding pwrctl driver to QCom WCN wifi if the DT lacks the necessary PMU regulator descriptions (Bartosz Golaszewski) * tag 'pci-v6.12-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: PCI/pwrctl: Abandon QCom WCN probe on pre-pwrseq device-trees PCI: Hold rescan lock while adding devices during host probe
…git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "Update cpufreq documentation to match the code after recent changes (Christian Loehle), fix a units conversion issue in the CPPC cpufreq driver (liwei), and fix an error check in the dtpm_devfreq power capping driver (Yuan Can)" * tag 'pm-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: CPPC: fix perf_to_khz/khz_to_perf conversion exception powercap: dtpm_devfreq: Fix error check against dev_pm_qos_add_request() cpufreq: docs: Reflect latency changes in docs
…l/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix an ACPI PRM (Platform Runtime Mechanism) issue and add two
new DMI quirks, one for an ACPI IRQ override and one for lid switch
detection:
- Make acpi_parse_prmt() look for EFI_MEMORY_RUNTIME memory regions
only to comply with the UEFI specification and make PRM use
efi_guid_t instead of guid_t to avoid a compiler warning triggered
by that change (Koba Ko, Dan Carpenter)
- Add an ACPI IRQ override quirk for LG 16T90SP (Christian Heusel)
- Add a lid switch detection quirk for Samsung Galaxy Book2 (Shubham
Panwar)"
* tag 'acpi-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PRM: Clean up guid type in struct prm_handler_info
ACPI: button: Add DMI quirk for Samsung Galaxy Book2 to fix initial lid detection issue
ACPI: resource: Add LG 16T90SP to irq1_level_low_skip_override[]
ACPI: PRM: Find EFI_MEMORY_RUNTIME block for PRM handler and context
…git/cel/linux Pull nfsd fixes from Chuck Lever: - Fix a couple of use-after-free bugs * tag 'nfsd-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: nfsd: cancel nfsd_shrinker_work using sync mode in nfs4_state_shutdown_net nfsd: fix race between laundromat and free_stateid
…/kernel/git/mszeredi/fuse Pull fuse fixes from Miklos Szeredi: - Fix cached size after passthrough writes This fix needed a trivial change in the backing-file API, which resulted in some non-fuse files being touched. - Revert a commit meant as a cleanup but which triggered a WARNING - Remove a stray debug line left-over * tag 'fuse-fixes-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: remove stray debug line Revert "fuse: move initialization of fuse_file to fuse_writepages() instead of in callback" fuse: update inode size after extending passthrough write fs: pass offset and result to backing_file end_write() callback
…h/cifs-2.6 Pull smb client fixes from Steve French: - Fix init module error caseb - Fix memory allocation error path (for passwords) in mount * tag 'v6.12-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: fix warning when destroy 'cifs_io_request_pool' smb: client: Handle kstrdup failures for passwords
Pull more 9p reverts from Dominique Martinet: "Revert patches causing inode collision problems. The code simplification introduced significant regressions on servers that do not remap inode numbers when exporting multiple underlying filesystems with colliding inodes. See the top-most revert (commit be2ca38) for details. This problem had been ignored for too long and the reverts will also head to stable (6.9+). I'm confident this set of patches gets us back to previous behaviour (another related patch had already been reverted back in April and we're almost back to square 1, and the rest didn't touch inode lifecycle)" * tag '9p-for-6.12-rc5' of https://github.com/martinetd/linux: Revert "fs/9p: simplify iget to remove unnecessary paths" Revert "fs/9p: fix uaf in in v9fs_stat2inode_dotl" Revert "fs/9p: remove redundant pointer v9ses" Revert " fs/9p: mitigate inode collisions"
When support for vivobook fan profiles was added, the initial call to throttle_thermal_policy_set_default() was removed, which however is necessary for full initialization. Fix this by calling throttle_thermal_policy_set_default() again when setting up the platform profile. Fixes: bcbfceb ("platform/x86: asus-wmi: add support for vivobook fan profiles") Reported-by: Michael Larabel <[email protected]> Closes: https://www.phoronix.com/review/lunar-lake-xe2/5 Signed-off-by: Armin Wolf <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]>
In a commit 24b7f8e ("firewire: core: use helper functions for self ID sequence"), the enumeration over self ID sequence was refactored with some helper functions with KUnit tests. These helper functions are guaranteed to work expectedly by the KUnit tests, however their application includes a mistake to assign invalid value to the index of port connected to parent device. This bug affects the case that any extra node devices which has three or more ports are connected to 1394 OHCI controller. In the case, the path to update the tree cache could hits WARN_ON(), and gets general protection fault due to the access to invalid address computed by the invalid value. This commit fixes the bug to assign correct port index. Cc: [email protected] Reported-by: Edmund Raile <[email protected]> Closes: https://lore.kernel.org/lkml/[email protected]/ Fixes: 24b7f8e ("firewire: core: use helper functions for self ID sequence") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Sakamoto <[email protected]>
…fs-linux Pull xfs fixes from Carlos Maiolino: - Fix recovery of allocator ops after a growfs - Do not fail repairs on metadata files with no attr fork * tag 'xfs-6.12-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: update the pag for the last AG at recovery time xfs: don't use __GFP_RETRY_MAYFAIL in xfs_initialize_perag xfs: error out when a superblock buffer update reduces the agcount xfs: update the file system geometry after recoverying superblock buffers xfs: merge the perag freeing helpers xfs: pass the exact range to initialize to xfs_initialize_perag xfs: don't fail repairs on metadata files with no attr fork
Pull block fixes from Jens Axboe: - Pull request for MD via Song fixing a few issues - Fix a wrong check in blk_rq_map_user_bvec(), causing IO errors on passthrough IO (Xinyu) * tag 'block-6.12-20241026' of git://git.kernel.dk/linux: block: fix sanity checks in blk_rq_map_user_bvec md/raid10: fix null ptr dereference in raid10_size() md: ensure child flush IO does not affect origin bio->bi_status
…inux/kernel/git/ieee1394/linux1394 Pull firewire fix from Takashi Sakamoto: "A single commit to resolve a regression existing in v6.11 or later. The change in 1394 OHCI driver in v6.11 kernel could cause general protection faults when rediscovering nodes in IEEE 1394 bus while holding a spin lock. Consequently, watchdog checks can report a hard lockup. Currently, this issue is observed primarily during the system resume phase when using an extra node with three ports or more is used. However, it could potentially occur in the other cases as well" * tag 'firewire-fixes-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: core: fix invalid port index for parent device
…scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: - Asus thermal profile fix, fixing performance issues on Lunar Lake - Intel PMC: one revert for a lockdep issue and one bugfix - Dell WMI: Ignore some WMI events on suspend/resume to silence warnings * tag 'platform-drivers-x86-v6.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: asus-wmi: Fix thermal profile initialization platform/x86: dell-wmi: Ignore suspend notifications platform/x86/intel/pmc: Fix pmc_core_iounmap to call iounmap for valid addresses platform/x86:intel/pmc: Revert "Enable the ACPI PM Timer to be turned off when suspended"
…rnel/git/trace/linux-trace Pull ftrace fixes from Steven Rostedt: - Fix missing mutex unlock in error path of register_ftrace_graph() A previous fix added a return on an error path and forgot to unlock the mutex. Instead of dealing with error paths, use guard(mutex) as the mutex is just released at the exit of the function anyway. Other functions in this file should be updated with this, but that's a cleanup and not a fix. - Change cpuhp setup name to be consistent with other cpuhp states The same fix that the above patch fixes added a cpuhp_setup_state() call with the name of "fgraph_idle_init". I was informed that it should instead be something like: "fgraph:online". Update that too. * tag 'ftrace-v6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: fgraph: Change the name of cpuhp state to "fgraph:online" fgraph: Fix missing unlock in register_ftrace_graph()
…linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Prevent a certain range of pages which get marked as hypervisor-only, to get allocated to a CoCo (SNP) guest which cannot use them and thus fail booting - Fix the microcode loader on AMD to pay attention to the stepping of a patch and to handle the case where a BIOS config option splits the machine into logical NUMA nodes per L3 cache slice - Disable LAM from being built by default due to security concerns * tag 'x86_urgent_for_v6.12_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sev: Ensure that RMP table fixups are reserved x86/microcode/AMD: Split load_microcode_amd() x86/microcode/AMD: Pay attention to the stepping dynamically x86/lam: Disable ADDRESS_MASKING in most cases
…ernel/git/broonie/spi Pull spi fixes from Mark Brown: "A small collection of driver specific fixes for SPI, there's nothing particularly remarkable about any of them" * tag 'spi-fix-v6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: spi-fsl-dspi: Fix crash when not using GPIO chip select spi: geni-qcom: Fix boot warning related to pm_runtime and devres spi: mtk-snfi: fix kerneldoc for mtk_snand_is_page_ops() spi: stm32: fix missing device mode capability in stm32mp25
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.