mm/shmem, swap: fix softlockup with mTHP swapin

Following softlockup can be easily reproduced on my test machine with:

echo always > /sys/kernel/mm/transparent_hugepage/hugepages-64kB/enabled
swapon /dev/zram0 # zram0 is a 48G swap device
mkdir -p /sys/fs/cgroup/memory/test
echo 1G > /sys/fs/cgroup/test/memory.max
echo $BASHPID > /sys/fs/cgroup/test/cgroup.procs
while true; do
    dd if=/dev/zero of=/tmp/test.img bs=1M count=5120
    cat /tmp/test.img > /dev/null
    rm /tmp/test.img
done

Then after a while:
watchdog: BUG: soft lockup - CPU#0 stuck for 763s! [cat:5787]
Modules linked in: zram virtiofs
CPU: 0 UID: 0 PID: 5787 Comm: cat Kdump: loaded Tainted: G             L      6.15.0.orig-gf3021d9246bc-dirty torvalds#118 PREEMPT(voluntary)·
Tainted: [L]=SOFTLOCKUP
Hardware name: Red Hat KVM/RHEL-AV, BIOS 0.0.0 02/06/2015
RIP: 0010:mpol_shared_policy_lookup+0xd/0x70
Code: e9 b8 b4 ff ff 31 c0 c3 cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 0f 1f 00 0f 1f 44 00 00 41 54 55 53 <48> 8b 1f 48 85 db 74 41 4c 8d 67 08 48 89 fb 48 89 f5 4c 89 e7 e8
RSP: 0018:ffffc90002b1fc28 EFLAGS: 00000202
RAX: 00000000001c20ca RBX: 0000000000724e1e RCX: 0000000000000001
RDX: ffff888118e214c8 RSI: 0000000000057d42 RDI: ffff888118e21518
RBP: 000000000002bec8 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000bf4 R11: 0000000000000000 R12: 0000000000000001
R13: 00000000001c20ca R14: 00000000001c20ca R15: 0000000000000000
FS:  00007f03f995c740(0000) GS:ffff88a07ad9a000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f03f98f1000 CR3: 0000000144626004 CR4: 0000000000770eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 <TASK>
 shmem_alloc_folio+0x31/0xc0
 shmem_swapin_folio+0x309/0xcf0
 ? filemap_get_entry+0x117/0x1e0
 ? xas_load+0xd/0xb0
 ? filemap_get_entry+0x101/0x1e0
 shmem_get_folio_gfp+0x2ed/0x5b0
 shmem_file_read_iter+0x7f/0x2e0
 vfs_read+0x252/0x330
 ksys_read+0x68/0xf0
 do_syscall_64+0x4c/0x1c0
 entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f03f9a46991
Code: 00 48 8b 15 81 14 10 00 f7 d8 64 89 02 b8 ff ff ff ff eb bd e8 20 ad 01 00 f3 0f 1e fa 80 3d 35 97 10 00 00 74 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 4f c3 66 0f 1f 44 00 00 55 48 89 e5 48 83 ec
RSP: 002b:00007fff3c52bd28 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 0000000000040000 RCX: 00007f03f9a46991
RDX: 0000000000040000 RSI: 00007f03f98ba000 RDI: 0000000000000003
RBP: 00007fff3c52bd50 R08: 0000000000000000 R09: 00007f03f9b9a380
R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000040000
R13: 00007f03f98ba000 R14: 0000000000000003 R15: 0000000000000000
 </TASK>

The reason is simple, readahead brought some order 0 folio in swap
cache, and the swapin mTHP folio being allocated is in confict with it,
so swapcache_prepare fails and causes shmem_swap_alloc_folio to return
-EEXIST, and shmem simply retries again and again causing this loop.

Fix it by applying a similar fix for anon mTHP swapin.

The performance change is very slight, time of swapin 10g zero folios
with shmem (test for 12 times):
Before:  2.47s
After:   2.48s

Fixes: 1dd44c0 ("mm: shmem: skip swapcache for swapin of synchronous swap device")
Signed-off-by: Kairui Song <[email protected]>

Author: ryncsn

mm/memory.c

@@ -4313,26 +4313,6 @@ static struct folio *__alloc_swap_folio(struct vm_fault *vmf)
 }
 
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
-static inline int non_swapcache_batch(swp_entry_t entry, int max_nr)
-{
-	struct swap_info_struct *si = swp_swap_info(entry);
-	pgoff_t offset = swp_offset(entry);
-	int i;
-
-	/*
-	 * While allocating a large folio and doing swap_read_folio, which is
-	 * the case the being faulted pte doesn't have swapcache. We need to
-	 * ensure all PTEs have no cache as well, otherwise, we might go to
-	 * swap devices while the content is in swapcache.
-	 */
-	for (i = 0; i < max_nr; i++) {
-		if ((si->swap_map[offset + i] & SWAP_HAS_CACHE))
-			return i;
-	}
-
-	return i;
-}
-
 /*
  * Check if the PTEs within a range are contiguous swap entries
  * and have consistent swapcache, zeromap.

mm/shmem.c

@@ -2256,6 +2256,7 @@ static int shmem_swapin_folio(struct inode *inode, pgoff_t index,
 	folio = swap_cache_get_folio(swap, NULL, 0);
 	order = xa_get_order(&mapping->i_pages, index);
 	if (!folio) {
+		int nr_pages = 1 << order;
 		bool fallback_order0 = false;
 
 		/* Or update major stats only when swapin succeeds?? */
@@ -2271,7 +2272,8 @@ static int shmem_swapin_folio(struct inode *inode, pgoff_t index,
 		 * to swapin order-0 folio, as well as for zswap case.
 		 */
 		if (order > 0 && ((vma && unlikely(userfaultfd_armed(vma))) ||
-				  !zswap_never_enabled()))
+				  !zswap_never_enabled() ||
+				  non_swapcache_batch(swap, nr_pages) != nr_pages))
 			fallback_order0 = true;
 
 		/* Skip swapcache for synchronous device. */

mm/swap.h

@@ -108,6 +108,25 @@ static inline int swap_zeromap_batch(swp_entry_t entry, int max_nr,
 		return find_next_bit(sis->zeromap, end, start) - start;
 }
 
+static inline int non_swapcache_batch(swp_entry_t entry, int max_nr)
+{
+	struct swap_info_struct *si = swp_swap_info(entry);
+	pgoff_t offset = swp_offset(entry);
+	int i;
+
+	/*
+	 * While allocating a large folio and doing mTHP swapin, we need to
+	 * ensure all entries are not cached, otherwise, the mTHP folio will
+	 * be in conflict with the folio in swap cache.
+	 */
+	for (i = 0; i < max_nr; i++) {
+		if ((si->swap_map[offset + i] & SWAP_HAS_CACHE))
+			return i;
+	}
+
+	return i;
+}
+
 #else /* CONFIG_SWAP */
 struct swap_iocb;
 static inline void swap_read_folio(struct folio *folio, struct swap_iocb **plug)
@@ -202,6 +221,10 @@ static inline int swap_zeromap_batch(swp_entry_t entry, int max_nr,
 	return 0;
 }
 
+static inline int non_swapcache_batch(swp_entry_t entry, int max_nr)
+{
+	return 0;
+}
 #endif /* CONFIG_SWAP */
 
 /**