serial: 8250: fix panic due to PSLVERR

commit 7f8fdd4 upstream.

When the PSLVERR_RESP_EN parameter is set to 1, the device generates
an error response if an attempt is made to read an empty RBR (Receive
Buffer Register) while the FIFO is enabled.

In serial8250_do_startup(), calling serial_port_out(port, UART_LCR,
UART_LCR_WLEN8) triggers dw8250_check_lcr(), which invokes
dw8250_force_idle() and serial8250_clear_and_reinit_fifos(). The latter
function enables the FIFO via serial_out(p, UART_FCR, p->fcr).
Execution proceeds to the serial_port_in(port, UART_RX).
This satisfies the PSLVERR trigger condition.

When another CPU (e.g., using printk()) is accessing the UART (UART
is busy), the current CPU fails the check (value & ~UART_LCR_SPAR) ==
(lcr & ~UART_LCR_SPAR) in dw8250_check_lcr(), causing it to enter
dw8250_force_idle().

Put serial_port_out(port, UART_LCR, UART_LCR_WLEN8) under the port->lock
to fix this issue.

Panic backtrace:
[    0.442336] Oops - unknown exception [#1]
[    0.442343] epc : dw8250_serial_in32+0x1e/0x4a
[    0.442351]  ra : serial8250_do_startup+0x2c8/0x88e
...
[    0.442416] console_on_rootfs+0x26/0x70

Fixes: c49436b ("serial: 8250_dw: Improve unwritable LCR workaround")
Link: https://lore.kernel.org/all/[email protected]/T/
Signed-off-by: Yunhui Cui <[email protected]>
Reviewed-by: John Ogness <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[ adapted to inline code structure without separate serial8250_initialize helper function ]
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

Author: cuiyunhui

drivers/tty/serial/8250/8250_port.c

@@ -2376,9 +2376,8 @@ int serial8250_do_startup(struct uart_port *port)
 	/*
 	 * Now, initialize the UART
 	 */
-	serial_port_out(port, UART_LCR, UART_LCR_WLEN8);
-
 	uart_port_lock_irqsave(port, &flags);
+	serial_port_out(port, UART_LCR, UART_LCR_WLEN8);
 	if (up->port.flags & UPF_FOURPORT) {
 		if (!up->port.irq)
 			up->port.mctrl |= TIOCM_OUT1;