Merge pull request #11122 from OpenNuvoton/nuvoton_m263

Support Nuvoton's new target NUMAKER_IOT_M263A

Author: 0xc0170

targets/TARGET_NUVOTON/TARGET_M261/PeripheralNames.h

@@ -0,0 +1,151 @@
+/* 
+ * Copyright (c) 2019-2020 Nuvoton Technology Corporation
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// NOTE: Check all module base addresses (XXX_BASE in BSP) for free bit fields to define module name 
+//       which encodes module base address and module index/subindex.
+#define NU_MODSUBINDEX_Pos              0
+#define NU_MODSUBINDEX_Msk              (0x1Ful << NU_MODSUBINDEX_Pos)
+#define NU_MODINDEX_Pos                 20
+#define NU_MODINDEX_Msk                 (0xFul << NU_MODINDEX_Pos)
+
+#define NU_MODNAME(MODBASE, INDEX, SUBINDEX)    ((MODBASE) | ((INDEX) << NU_MODINDEX_Pos) | ((SUBINDEX) << NU_MODSUBINDEX_Pos))
+#define NU_MODBASE(MODNAME)                     ((MODNAME) & ~(NU_MODINDEX_Msk | NU_MODSUBINDEX_Msk))
+#define NU_MODINDEX(MODNAME)                    (((MODNAME) & NU_MODINDEX_Msk) >> NU_MODINDEX_Pos)
+#define NU_MODSUBINDEX(MODNAME)                 (((MODNAME) & NU_MODSUBINDEX_Msk) >> NU_MODSUBINDEX_Pos)
+
+#if 0
+typedef enum {
+    GPIO_A = (int) NU_MODNAME(GPIOA_BASE, 0, 0),
+    GPIO_B = (int) NU_MODNAME(GPIOB_BASE, 1, 0),
+    GPIO_C = (int) NU_MODNAME(GPIOC_BASE, 2, 0),
+    GPIO_D = (int) NU_MODNAME(GPIOD_BASE, 3, 0),
+    GPIO_E = (int) NU_MODNAME(GPIOE_BASE, 4, 0),
+    GPIO_F = (int) NU_MODNAME(GPIOF_BASE, 5, 0),
+    GPIO_G = (int) NU_MODNAME(GPIOF_BASE, 6, 0)
+} GPIOName;
+#endif
+
+typedef enum {  
+    ADC_0_0 = (int) NU_MODNAME(EADC0_BASE, 0, 0),
+    ADC_0_1 = (int) NU_MODNAME(EADC0_BASE, 0, 1),
+    ADC_0_2 = (int) NU_MODNAME(EADC0_BASE, 0, 2),
+    ADC_0_3 = (int) NU_MODNAME(EADC0_BASE, 0, 3),
+    ADC_0_4 = (int) NU_MODNAME(EADC0_BASE, 0, 4),
+    ADC_0_5 = (int) NU_MODNAME(EADC0_BASE, 0, 5),
+    ADC_0_6 = (int) NU_MODNAME(EADC0_BASE, 0, 6),
+    ADC_0_7 = (int) NU_MODNAME(EADC0_BASE, 0, 7),
+    ADC_0_8 = (int) NU_MODNAME(EADC0_BASE, 0, 8),
+    ADC_0_9 = (int) NU_MODNAME(EADC0_BASE, 0, 9),
+    ADC_0_10 = (int) NU_MODNAME(EADC0_BASE, 0, 10),
+    ADC_0_11 = (int) NU_MODNAME(EADC0_BASE, 0, 11),
+    ADC_0_12 = (int) NU_MODNAME(EADC0_BASE, 0, 12),
+    ADC_0_13 = (int) NU_MODNAME(EADC0_BASE, 0, 13),
+    ADC_0_14 = (int) NU_MODNAME(EADC0_BASE, 0, 14),
+    ADC_0_15 = (int) NU_MODNAME(EADC0_BASE, 0, 15)
+} ADCName;
+
+typedef enum {
+    DAC_0_0 = (int) NU_MODNAME(DAC0_BASE, 0, 0),
+    DAC_1_0 = (int) NU_MODNAME(DAC1_BASE, 1, 0)
+} DACName;
+
+typedef enum {
+    UART_0 = (int) NU_MODNAME(UART0_BASE, 0, 0),
+    UART_1 = (int) NU_MODNAME(UART1_BASE, 1, 0),
+    UART_2 = (int) NU_MODNAME(UART2_BASE, 2, 0),
+    UART_3 = (int) NU_MODNAME(UART3_BASE, 3, 0),
+    UART_4 = (int) NU_MODNAME(UART4_BASE, 4, 0),
+    UART_5 = (int) NU_MODNAME(UART5_BASE, 5, 0),
+    // NOTE: board-specific
+    STDIO_UART  = UART_0
+
+} UARTName;
+
+typedef enum {
+    SPI_0 = (int) NU_MODNAME(SPI0_BASE, 0, 0),
+    SPI_1 = (int) NU_MODNAME(SPI1_BASE, 1, 0),
+    SPI_2 = (int) NU_MODNAME(SPI2_BASE, 2, 0),
+    SPI_3 = (int) NU_MODNAME(SPI3_BASE, 3, 0)
+
+} SPIName;
+
+typedef enum {
+    I2C_0 = (int) NU_MODNAME(I2C0_BASE, 0, 0),
+    I2C_1 = (int) NU_MODNAME(I2C1_BASE, 1, 0),
+    I2C_2 = (int) NU_MODNAME(I2C2_BASE, 2, 0)
+
+} I2CName;
+
+typedef enum {
+    PWM_0_0 = (int) NU_MODNAME(EPWM0_BASE, 0, 0),
+    PWM_0_1 = (int) NU_MODNAME(EPWM0_BASE, 0, 1),
+    PWM_0_2 = (int) NU_MODNAME(EPWM0_BASE, 0, 2),
+    PWM_0_3 = (int) NU_MODNAME(EPWM0_BASE, 0, 3),
+    PWM_0_4 = (int) NU_MODNAME(EPWM0_BASE, 0, 4),
+    PWM_0_5 = (int) NU_MODNAME(EPWM0_BASE, 0, 5),
+    PWM_1_0 = (int) NU_MODNAME(EPWM1_BASE, 1, 0),
+    PWM_1_1 = (int) NU_MODNAME(EPWM1_BASE, 1, 1),
+    PWM_1_2 = (int) NU_MODNAME(EPWM1_BASE, 1, 2),
+    PWM_1_3 = (int) NU_MODNAME(EPWM1_BASE, 1, 3),
+    PWM_1_4 = (int) NU_MODNAME(EPWM1_BASE, 1, 4),
+    PWM_1_5 = (int) NU_MODNAME(EPWM1_BASE, 1, 5),
+
+} PWMName;
+
+typedef enum {
+    TIMER_0  = (int) NU_MODNAME(TMR01_BASE, 0, 0),
+    TIMER_1  = (int) NU_MODNAME(TMR01_BASE + 0x100, 1, 0),
+    TIMER_2  = (int) NU_MODNAME(TMR23_BASE, 2, 0),
+    TIMER_3  = (int) NU_MODNAME(TMR23_BASE + 0x100, 3, 0),
+
+} TIMERName;
+
+typedef enum {
+    RTC_0 = (int) NU_MODNAME(RTC_BASE, 0, 0)
+
+} RTCName;
+
+typedef enum {
+    DMA_0 = (int) NU_MODNAME(PDMA0_BASE, 0, 0),
+    DMA_1 = (int) NU_MODNAME(PDMA1_BASE, 1, 0)
+
+} DMAName;
+
+typedef enum {
+    SD_0 = (int) NU_MODNAME(SDH0_BASE, 0, 0)
+
+} SDName;
+
+typedef enum {
+    CAN_0 = (int) NU_MODNAME(CAN0_BASE, 0, 0)
+
+} CANName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif