Remove MTB_STM_S2LP target

Author: Marcelo Salazar

components/802.15.4_RF/stm-s2lp-rf-driver/mbed_lib.json

@@ -4,11 +4,6 @@
         "provide-default": {
             "help": "Provide default NanostackRfpy. [true/false]",
             "value": false
-        },
-    "target_overrides": {
-        "MTB_STM_S2LP": {
-           "s2lp.provide-default": true
-         }
         }
     }
 }

components/802.15.4_RF/stm-s2lp-rf-driver/stm-s2lp-rf-driver/NanostackRfPhys2lp.h

@@ -28,86 +28,6 @@
 // Uncomment to use testing gpios attached to TX/RX processes
 // #define TEST_GPIOS_ENABLED
 
-#if defined(TARGET_MTB_STM_S2LP)
-#if !defined(S2LP_SPI_SDI)
-#define S2LP_SPI_SDI        PA_7
-#endif
-#if !defined(S2LP_SPI_SDO)
-#define S2LP_SPI_SDO        PA_6
-#endif
-#if !defined(S2LP_SPI_SCLK)
-#define S2LP_SPI_SCLK       PA_5
-#endif
-#if !defined(S2LP_SPI_CS)
-#define S2LP_SPI_CS         PC_0
-#endif
-#if !defined(S2LP_SPI_SDN)
-#define S2LP_SPI_SDN        PF_13
-#endif
-#if !defined(S2LP_SPI_GPIO0)
-#define S2LP_SPI_GPIO0      PA_3
-#endif
-#if !defined(S2LP_SPI_GPIO1)
-#define S2LP_SPI_GPIO1      PC_3
-#endif
-#if !defined(S2LP_SPI_GPIO2)
-#define S2LP_SPI_GPIO2      PF_3
-#endif
-#if !defined(S2LP_SPI_GPIO3)
-#define S2LP_SPI_GPIO3      PF_10
-#endif
-#if !defined(S2LP_I2C_SDA)
-#define S2LP_I2C_SDA        PB_7
-#endif
-#if !defined(S2LP_I2C_SCL)
-#define S2LP_I2C_SCL        PB_6
-#endif
-#define AT24MAC
-#else
-#if !defined(S2LP_SPI_SDI)
-#define S2LP_SPI_SDI        D11
-#endif
-#if !defined(S2LP_SPI_SDO)
-#define S2LP_SPI_SDO        D12
-#endif
-#if !defined(S2LP_SPI_SCLK)
-#define S2LP_SPI_SCLK       D13
-#endif
-#if !defined(S2LP_SPI_CS)
-#define S2LP_SPI_CS         A1
-#endif
-#if !defined(S2LP_SPI_SDN)
-#define S2LP_SPI_SDN        D7
-#endif
-#if !defined(TEST_PIN_TX)
-#define TEST_PIN_TX         D6
-#endif
-#if !defined(TEST_PIN_RX)
-#define TEST_PIN_RX         D5
-#endif
-#if !defined(TEST_PIN_CSMA)
-#define TEST_PIN_CSMA       D4
-#endif
-#if !defined(TEST_PIN_SPARE_1)
-#define TEST_PIN_SPARE_1    D2
-#endif
-#if !defined(TEST_PIN_SPARE_2)
-#define TEST_PIN_SPARE_2    D8
-#endif
-#if !defined(S2LP_SPI_GPIO0)
-#define S2LP_SPI_GPIO0      A0
-#endif
-#if !defined(S2LP_SPI_GPIO1)
-#define S2LP_SPI_GPIO1      A2
-#endif
-#if !defined(S2LP_SPI_GPIO2)
-#define S2LP_SPI_GPIO2      A3
-#endif
-#if !defined(S2LP_SPI_GPIO3)
-#define S2LP_SPI_GPIO3      A5
-#endif
-#endif
-
 #include "at24mac_s2lp.h"
 
 class RFPins;